Archeage
This combination offers playable performance with an average of 54 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 28 | 36 | 39 |
| 1440p QHD | 32 | 44 | 63 | 74 |
| 1080p Full HD | 45 | 67 | 93 | 109 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 9700X + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 7 9700X and NVIDIA GeForce GTX 1070 pairing produces a playable but heavily GPU-bound experience in Archeage, with the data showing that the GTX 1070 is the definitive limiting factor at higher resolutions and settings. The benchmark results indicate that this combo ranks 1434th out of 1727 tested combinations, placing it in the lower 17% of configurations, a position driven almost entirely by the aging GPU's performance ceiling rather than the modern CPU's capabilities.
Resolution Scaling
The measured FPS data reveals a steep and consistent performance drop as resolution increases, confirming that the GTX 1070 is the primary bottleneck. At 1080p with Low settings, the combo achieves 108.8 FPS, but this falls to 73.8 FPS at 1440p and further to 39 FPS at 4K. This represents a 64% reduction in frame rate from 1080p to 4K at Low settings, a scaling pattern characteristic of a GPU that is overwhelmed by pixel throughput demands.
The scaling becomes even more pronounced at higher quality presets. At High settings, the frame rate drops from 67.1 FPS at 1080p to 44 FPS at 1440p, then plummets to 27.5 FPS at 4K. The Ultra preset shows the most dramatic collapse: 44.6 FPS at 1080p falls to 32 FPS at 1440p and reaches an unplayable 14.8 FPS at 4K. These numbers indicate that the GTX 1070's 8 GB of GDDR5 memory and 256-bit bus are insufficient for 4K rendering in this MMORPG, regardless of the Ryzen 7 9700X's ability to feed frames quickly.
The gap between Low and Ultra settings widens dramatically with resolution. At 1080p, the difference between Low and Ultra is 64.2 FPS (108.8 vs 44.6), but at 4K, this gap narrows to just 24.2 FPS (39 vs 14.8). This compression suggests that at 4K, the GPU is so saturated that even dropping to Low settings cannot rescue playability, whereas at 1080p, the GPU has enough headroom to respond to settings changes. The data clearly shows that this combo is best suited for 1080p or 1440p gaming, with 4K being viable only at Low settings and still falling short of 40 FPS.
CPU Role
The Ryzen 7 9700X brings substantial compute resources to this pairing, with 8 cores and 16 threads based on the Zen 5 architecture. Its benchmark scores are impressive, including a Cinebench R23 multicore score of 31588 and a single-core score of 4459, placing it in the 89th percentile of all CPUs tested. However, Archeage's measured results show that this CPU power is largely untapped at higher resolutions, where the GPU becomes the clear limiting factor.
The CPU's 3.80 GHz base clock and 5.50 GHz boost clock provide ample single-thread performance for an MMORPG, which typically relies on a few heavily utilized threads for game logic and network processing. The PassMark single-thread score of 4654 confirms strong per-core performance, and the 3DMark single-thread score of 1280 reinforces this. At 1080p with Low settings, where the GPU load is relatively light, the CPU's ability to push frames is evident in the 108.8 FPS result, but even here, the GPU still limits performance.
The data suggests that the CPU is never the primary constraint in this configuration. At 4K Ultra, the 14.8 FPS result is purely a GPU limitation, as the CPU's 16 threads and 32 MB of L3 cache are more than capable of handling Archeage's demands. The 89th percentile CPU ranking versus the 51st percentile GPU ranking (for the GTX 1070) makes the imbalance clear: the CPU is a modern, high-end part paired with a mid-range GPU from 2016, and the measured FPS reflects this mismatch at every resolution.
FAQ
Q: Is this combo capable of 60 FPS at 1080p?
A: Yes, but only at Low or Medium settings. The measured data shows 108.8 FPS at Low and 92.8 FPS at Medium, while High settings drop to 67.1 FPS and Ultra falls to 44.6 FPS.
Q: What is the best resolution for this pairing?
A: 1080p is the only resolution where all settings except Ultra exceed 60 FPS. At 1440p, only Low (73.8 FPS) and Medium (62.7 FPS) manage to stay above 60 FPS, while 4K never reaches 40 FPS at any setting.
Q: How does the GTX 1070 compare to its nearest rivals in synthetic benchmarks?
A: The GTX 1070's average benchmark score of 12331 is 0.7% higher than the NVIDIA Quadro K4200's 12241, but 1.3% lower than the GeForce GTX 880M's 12490 and 1.4% lower than the GTX 1650 SUPER's 12504.
Q: Does the CPU bottleneck the GPU in this game?
A: No. The Ryzen 7 9700X ranks in the 89th percentile of all CPUs, while the GTX 1070 ranks in the 51st percentile of GPUs. The measured FPS drops consistently with resolution, indicating the GPU is the limiting component.
Q: What frame rate can be expected at 4K with Ultra settings?
A: The measured average is 14.8 FPS, which is not playable. Even at 4K Low, the average is only 39 FPS, so 4K is not a viable resolution for this combo in Archeage.
Q: How much does the CPU's single-thread performance matter for this game?
A: The CPU's strong single-thread scores (4459 in Cinebench R23, 4654 in PassMark) help maintain playable frame rates at 1080p, but the GPU's limits dominate at higher resolutions, making the CPU's advantages less relevant.
How This Combo Ranks
The combo rank of 1434 out of 1727 tested combinations places this pairing in the bottom 17% of all configurations tested. This low ranking is not a reflection of the CPU's capabilities, as the Ryzen 7 9700X itself sits in the 89th percentile of all CPUs, but rather a consequence of the GTX 1070's age and performance tier.
The GPU's average benchmark score of 12331 places it in the 51st percentile of all GPUs, and its nearest rivals include the Quadro K4200 (0.7% slower), GTX 880M (1.3% faster), and GTX 1650 SUPER (1.4% faster). These margins are small, indicating that the GTX 1070 is firmly in the mid-range tier, which explains why the combo ranks so low despite the modern CPU.
In the context of Archeage specifically, the measured FPS data shows that this combo can handle the game at 1080p with reasonable quality, but it falls behind more balanced pairings at higher resolutions. The 1434th rank suggests that most other tested combos include either a more capable GPU or a more balanced CPU-GPU pairing. The CPU's 89th percentile ranking does little to boost the overall combo rank because the GPU's 51st percentile ranking drags the combined performance down.
Measured FPS Breakdown
The measured FPS data provides a complete picture across three resolutions and four quality settings. At 1920x1080, the combo delivers 108.8 FPS at Low, 92.8 FPS at Medium, 67.1 FPS at High, and 44.6 FPS at Ultra. These results show a clear progression where each quality tier reduces performance by roughly 20-25 FPS, with the Low to Medium gap being the smallest at 16 FPS.
At 2560x1440, the performance drops significantly: Low settings produce 73.8 FPS, Medium yields 62.7 FPS, High falls to 44 FPS, and Ultra drops to 32 FPS. The gap between Low and Medium narrows to 11.1 FPS, while the gap between High and Ultra remains at 12 FPS. This resolution shows that the GPU is starting to struggle, with only Low and Medium maintaining playable frame rates above 60 FPS.
At 3840x2160, the data shows a dramatic collapse: Low produces 39 FPS, Medium 36 FPS, High 27.5 FPS, and Ultra 14.8 FPS. The differences between settings shrink considerably, with only 3 FPS separating Low and Medium, and 12.7 FPS separating Low and Ultra. This compression indicates that the GPU is fully saturated at 4K, and settings changes have diminishing returns. The 4K Ultra result of 14.8 FPS is the lowest measured value across all tests, confirming that this resolution is unsuitable for this combo.
Settings Recommendations
The measured data suggests that the optimal experience for this combo is at 1080p with High settings, which delivers 67.1 FPS. This provides a good balance between visual quality and smooth gameplay, staying above the 60 FPS threshold while offering better visuals than Medium or Low. Players prioritizing frame rate should consider 1440p Low at 73.8 FPS, which offers higher resolution with a smooth frame rate, though the visual quality trade-off is significant.
For players who prefer higher resolutions, 1440p Medium at 62.7 FPS is the only other setting combination that exceeds 60 FPS, making it a viable alternative for those with 1440p monitors. The 1080p Ultra setting at 44.6 FPS is playable but noticeably less smooth, and the 4K options are all below 40 FPS, making them unsuitable for action-heavy gameplay in an MMORPG where responsiveness matters.
The data indicates that Ultra settings are not worth the performance cost at any resolution. At 1080p, Ultra is 22.5 FPS slower than High, and at 1440p, the gap is 12 FPS. The visual improvement from High to Ultra is typically minimal in Archeage, so the measured performance loss makes High the recommended preset for this combo. The 4K Low setting at 39 FPS is technically playable but below the smoothness threshold, so it should only be considered by players who prioritize resolution over frame rate.
GPU Role
The NVIDIA GeForce GTX 1070 is the definitive bottleneck in this configuration, and its specifications explain why. With 8 GB of GDDR5 memory on a 256-bit bus providing 256.3 GB/s of bandwidth, the GPU has enough memory capacity for 1080p and 1440p gaming but struggles at 4K. The 1920 shading units and 64 ROPs deliver a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s, which are sufficient for mid-range performance but fall short of modern standards.
The GPU's clock speeds of 1506 MHz base and 1683 MHz boost, combined with 6.463 TFLOPS of FP32 performance, place it in the 51st percentile of all GPUs. Its average benchmark score of 12331 is only 0.7% higher than the Quadro K4200 and 1.4% lower than the GTX 1650 SUPER, showing that it sits at the edge of mid-range performance. The GPU's 16 nm process node and 7,200 million transistors are dated by modern standards, which contributes to its lower efficiency compared to newer architectures.
The measured FPS data confirms the GPU's limitations. The 4K Ultra result of 14.8 FPS highlights the GPU's inability to handle the pixel count and shading demands at that resolution. Even at 1080p, the GPU's performance ceiling is evident: the 44.6 FPS Ultra result is the only setting below 60 FPS at that resolution, and the 108.8 FPS Low result shows that the GPU can perform well when the load is light. The GTX 1070's role is clear: it provides adequate performance for 1080p and 1440p gaming at medium to high settings, but it cannot sustain high frame rates at 4K or with Ultra settings enabled.
Hardware Specifications
AMD Ryzen 7 9700X
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9700X + NVIDIA GeForce GTX 1070 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 39.0 |
| 3840x2160 | Medium | 36.0 |
| 3840x2160 | High | 27.5 |
| 3840x2160 | Ultra | 14.8 |
| 2560x1440 | Low | 73.8 |
| 2560x1440 | Medium | 62.7 |
| 2560x1440 | High | 44.0 |
| 2560x1440 | Ultra | 32.0 |
| 1920x1080 | Low | 108.8 |
| 1920x1080 | Medium | 92.8 |
| 1920x1080 | High | 67.1 |
| 1920x1080 | Ultra | 44.6 |
Archeage with GTX 1070 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 9700X + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.