Archeage

Archeage

AVERAGE FPS
34
playable

This combination offers playable performance with an average of 34 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 13 23 27
1440p QHD 21 30 39 48
1080p Full HD 25 42 60 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 27
3840x2160 Medium 23
3840x2160 High 13
3840x2160 Ultra 13
2560x1440 Low 48
2560x1440 Medium 39
2560x1440 High 30
2560x1440 Ultra 21
1920x1080 Low 72
1920x1080 Medium 60
1920x1080 High 42
1920x1080 Ultra 25

Archeage with AMD Ryzen 7 5800X3D + AMD Radeon RX 580, In-Depth Analysis

FAQ

Q: Can this combo run Archeage at 4K Ultra?

A: No. The measured 4K Ultra average is 12.5 FPS, which is far below playable thresholds. Even 4K Low only reaches 26.6 FPS, indicating the GPU is severely overburdened at this resolution.

Q: What is the best resolution for this system in Archeage?

A: The data shows 1920x1080 is the only resolution where the combo achieves consistently playable frame rates. At 1080p, the average FPS ranges from 25.4 (Ultra) to 71.8 (Low), with Medium at 59.9 FPS being the highest playable preset.

Q: How much faster is the CPU compared to its nearest rivals?

A: The Ryzen 7 5800X3D has an average benchmark score of 26574, which is virtually identical to the AMD EPYC 8024P (26555, +0.1%) and the Intel Core i9-11900K (26546, +0.1%). It trails the AMD Ryzen 5 7600 by a negligible 0.2% and the Intel Core i9-12900HK by 0.4%.

Q: Is the RX 580 a mid-range GPU by today's standards?

A: The RX 580 sits at the 53rd percentile among all GPUs, placing it squarely in the mid-range category. Its average benchmark score of 13559 is nearly identical to the NVIDIA GeForce GTX 570 (13564, 0% delta), showing it performs in the same league as older high-end cards.

Q: Does the CPU bottleneck the GPU in this game?

A: Benchmark results indicate the opposite. The CPU has a high multi-threaded score (24063 in Cinebench R23) and a strong single-thread score (3397), while the GPU’s frame rates drop sharply as resolution increases. This pattern points to the GPU being the primary limiting factor.

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1080p, the average FPS drops from 71.8 on Low to 25.4 on Ultra, a decrease of 46.4 FPS. This represents a 64.6% performance loss when moving from the lowest to the highest preset.

GPU Role

The AMD Radeon RX 580 is built on the Polaris 20 chip using GCN 4.0 architecture on a 14nm process. It operates with a base clock of 1257 MHz and a boost clock of 1340 MHz, with memory running at 2000 MHz (8 Gbps effective). The 8 GB of GDDR5 memory across a 256-bit bus delivers 256.0 GB/s of bandwidth, which is a crucial specification for handling high-resolution textures in an MMORPG like Archeage.

The GPU’s performance in this game is telling. At 1080p Low, the card achieves 71.8 FPS, but this drops to 41.5 FPS at High and just 25.4 FPS at Ultra. The benchmark data clearly shows the RX 580’s compute capabilities are strained by higher-quality settings. With 2304 shading units and 144 texture mapping units, the card has enough raw throughput for older titles, but its 32 ROPs and 6.175 TFLOPS of FP32 performance limit its ability to handle the draw calls and post-processing effects in Archeage’s Ultra preset.

The GPU’s average benchmark score of 13559 places it in the 53rd percentile, and its nearest rival, the NVIDIA GeForce GTX 570, scores 13564 with a 0% delta. This suggests the RX 580 is a competent mid-range card, but it lacks the headroom for demanding 4K workloads. The measured 4K results confirm this: even at Low settings, the card only manages 26.6 FPS, which is below the 30 FPS threshold typically considered minimally playable.

CPU Role

The AMD Ryzen 7 5800X3D is a 5000-series processor with 8 cores and 16 threads based on Zen 3 (Vermeer) architecture. It runs at a base clock of 3.40 GHz with a boost clock of 4.50 GHz, and its standout feature is the 96 MB of shared L3 cache. This large cache is designed to reduce memory latency, which can be beneficial in MMO environments where many entities and player states need to be tracked simultaneously.

In synthetic benchmarks, the CPU shows strong multi-threaded performance: a Cinebench R23 multi-core score of 24063 and a Passmark multithread score of 28309. Single-thread performance is also respectable, with a Geekbench single-core score of 2116 and a Passmark single-thread score of 3234. These numbers indicate the CPU is well-equipped to handle the game logic and AI computations that Archeage requires, especially when many players are present in the same area.

The CPU’s average benchmark score of 26574 puts it in the 83rd percentile of all CPUs, and its nearest rivals are all within a 0.4% delta. The AMD EPYC 8024P (26555, +0.1%) and Intel Core i9-11900K (26546, +0.1%) are statistically tied, while the AMD Ryzen 5 7600 (26617, -0.2%) and Intel Core i9-12900HK (26672, -0.4%) are also extremely close. This means the 5800X3D is not meaningfully faster or slower than these peers, making it a balanced choice for gaming.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce an average of 71.8 FPS, which is smooth for an MMORPG. Medium settings drop to 59.9 FPS, still comfortable for most players. High settings average 41.5 FPS, which is playable but with noticeable stutter in busy scenes. Ultra settings fall to 25.4 FPS, which is below the ideal playability threshold.

At 2560x1440, performance degrades significantly. Low settings average 48.4 FPS, Medium drops to 39.4 FPS, and High falls to 30.4 FPS. Ultra is nearly unplayable at 21.2 FPS. This resolution demands more from the GPU’s memory bandwidth and pixel fill rate, and the RX 580’s 256.0 GB/s bandwidth is insufficient for smooth 1440p gameplay at higher presets.

At 3840x2160, the results are poor across the board. Low settings average 26.6 FPS, Medium drops to 22.8 FPS, and High falls to 13.4 FPS. Ultra is the worst at 12.5 FPS. These numbers indicate that 4K is not a viable option for this combo, as even the lowest preset fails to reach 30 FPS.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals the GPU as the bottleneck. At Low settings, 1080p yields 71.8 FPS, while 1440p yields 48.4 FPS (a 32.6% drop), and 4K yields 26.6 FPS (a 63.0% drop from 1080p). Similarly, at High settings, 1080p produces 41.5 FPS, 1440p produces 30.4 FPS (a 26.7% drop), and 4K produces 13.4 FPS (a 67.7% drop).

This scaling pattern is typical of a GPU-limited scenario. The CPU’s strong single-thread and multi-thread scores remain constant across resolutions, but the GPU must process four times as many pixels at 4K compared to 1080p. The RX 580’s 42.88 GPixel/s pixel rate and 193.0 GTexel/s texture rate are simply not enough to maintain playable frame rates at higher resolutions. The data suggests that the 5800X3D is not the limiting factor; even at 1080p Ultra, where the CPU would be most challenged by game logic, the FPS is only 25.4, which is still low enough to indicate the GPU is struggling.

Settings Recommendations

For the best experience, the data points to 1080p Medium as the optimal preset. At 59.9 FPS, it provides a smooth frame rate that is close to the 60 FPS target, while maintaining a balance between visual quality and performance. The jump from Medium to High costs 18.4 FPS (41.5 vs 59.9), which is a 30.7% reduction, and the visual gains may not justify the loss of smoothness in a fast-paced MMO.

If visual fidelity is a priority, 1080p High at 41.5 FPS is the highest playable option, but players should expect frame drops in crowded areas. 1080p Ultra at 25.4 FPS is not recommended, as it sacrifices too much fluidity. At 1440p, Low (48.4 FPS) is the only preset that offers a playable experience, and even then, it lacks the detail of 1080p Medium. For 4K, no preset is recommended, as all average FPS values are below 27.

How This Combo Ranks

This combination of the AMD Ryzen 7 5800X3D and the AMD Radeon RX 580 ranks 1600 out of 1727 tested combos in Archeage, placing it in the bottom 7.3% of all configurations. This is a low ranking, but it is largely due to the GPU’s mid-range performance rather than the CPU. The 5800X3D is a high-end processor, ranking in the 83rd percentile of all CPUs, while the RX 580 is in the 53rd percentile of GPUs.

The data suggests that this pairing is unbalanced for Archeage. The CPU has far more headroom than the GPU can utilize, especially at higher resolutions. The measured FPS values at 1080p show that the GPU is the primary constraint, as the CPU’s strong benchmarks do not translate into high frame rates at Ultra settings. In a game like Archeage, where CPU-bound scenarios (large player gatherings) are common, the 5800X3D would likely provide a smoother experience with a more powerful GPU. However, as configured, this combo is best suited for 1080p gaming with Medium to High settings, and it falls short of the performance needed for 1440p or 4K play.

Hardware Specifications

AMD Ryzen 7 5800X3D

Cores / Threads 8 / 16
Base Clock 3400 MHz
Boost Clock 4500 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 580

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1340 MHz MHz
TDP 185 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X3D + AMD Radeon RX 580 in Archeage

Resolution Settings Avg FPS
3840x2160 Low 26.6
3840x2160 Medium 22.8
3840x2160 High 13.4
3840x2160 Ultra 12.5
2560x1440 Low 48.4
2560x1440 Medium 39.4
2560x1440 High 30.4
2560x1440 Ultra 21.2
1920x1080 Low 71.8
1920x1080 Medium 59.9
1920x1080 High 41.5
1920x1080 Ultra 25.4

Archeage with Ryzen 7 5800X3D + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 580 + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X3D + RX 580

Explore FPS benchmarks for other games using this same hardware combination.