Archeage

Archeage

AVERAGE FPS
105
good

This combination provides smooth gameplay with an average of 105 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 50 70 81
1440p QHD 59 84 129 140
1080p Full HD 84 128 190 208

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 81
3840x2160 Medium 70
3840x2160 High 50
3840x2160 Ultra 32
2560x1440 Low 140
2560x1440 Medium 129
2560x1440 High 84
2560x1440 Ultra 59
1920x1080 Low 208
1920x1080 Medium 190
1920x1080 High 128
1920x1080 Ultra 84

Archeage with AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3080 Ti, In-Depth Analysis

FAQ

Q: How does the AMD Ryzen 7 5700G + RTX 3080 Ti combo rank in Archeage?

A: The combo ranks 466th out of 1727 tested combinations, placing it in the upper portion of the database. This position reflects a pairing where the GPU’s raw power is partially held back by the CPU’s older PCIe Gen 3 interface and the game’s MMO engine, which tends to favor fewer, faster threads.

Q: What is the best settings preset for 4K play?

A: At 3840x2160, the Medium preset yields 70.2 FPS, while High drops to 49.8 FPS and Ultra falls to 32.2 FPS. The data shows that Medium is the only 4K setting that stays comfortably above 60 FPS, making it the recommended choice for smooth 4K gameplay.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 7 5700G scores 25,626 in the average benchmark, sitting just 0.3% behind the AMD Ryzen 7 6800U (25,706) and 0.4% ahead of the Intel Xeon D-2752TER (25,532). It also edges out the Intel Core 5 210H by 0.5% and the AMD Ryzen 5 7640U by 0.6%.

Q: What is the FPS difference between Low and Ultra at 1080p?

A: At 1920x1080, Low settings produce 207.8 FPS, while Ultra settings yield 84.4 FPS. That is a 123.4 FPS gap, representing a 59% reduction in frame rate when moving from the lowest to the highest quality preset.

Q: Does the RTX 3080 Ti’s 12 GB VRAM matter for Archeage?

A: The GPU features 12 GB of GDDR6X memory on a 384-bit bus with 912.4 GB/s bandwidth. For a 2014 MMORPG, this capacity is far more than needed for texture storage, but the memory bandwidth does help sustain high FPS at 4K when the engine can utilize it, particularly at Medium settings.

Q: What is the GPU’s performance percentile relative to all GPUs?

A: The RTX 3080 Ti sits at the 83rd percentile among all GPUs, with an average benchmark score of 41,224. Its nearest rival, the RTX 3090, is only 0.5% faster, showing that this card remains highly competitive despite being end-of-life.

Settings Recommendations

The measured FPS data reveals a clear pattern: Archeage’s Ultra preset imposes a severe performance penalty across all resolutions, likely due to excessive draw distances and shadow effects that strain the CPU’s single-thread performance. At 1080p, Ultra yields 84.4 FPS, which is identical to the High preset at 1440p — a telling sign that the game becomes bound by something other than raw GPU throughput at these settings.

For 1080p users, the High preset at 127.9 FPS offers the best balance of visual fidelity and responsiveness, comfortably exceeding the 120 FPS threshold for high-refresh monitors. Medium at 189.5 FPS is only 23% faster than High, making the visual downgrade unjustifiable for most players. Low at 207.8 FPS is unnecessary unless chasing absolute competitive frame rates.

At 1440p, High delivers 84.4 FPS, which remains playable but leaves headroom for a more consistent experience on Medium at 128.9 FPS. The step from Medium to High costs 44.5 FPS (a 35% drop), so players with 144Hz monitors should stick with Medium. Ultra at 59.2 FPS is technically above 60 FPS but marginal for fast-paced combat.

At 4K, the choice is stark. Medium at 70.2 FPS is the only preset that clears 60 FPS, while High at 49.8 FPS and Ultra at 32.2 FPS fall below playable thresholds for most users. Low at 80.5 FPS shows that the GPU can push higher frame rates, but the visual compromise makes Medium the optimal 4K choice. The data indicates that Medium is the universal sweet spot, offering at least 70 FPS at every resolution tested.

Resolution Scaling

The FPS progression from 1080p to 4K reveals where the bottleneck shifts. At Low settings, frame rates scale almost linearly with pixel count: 207.8 FPS at 1080p drops to 140.1 FPS at 1440p (a 33% reduction) and then to 80.5 FPS at 4K (another 43% drop). This pattern suggests the GPU is the primary limiting factor at Low settings, as the CPU has plenty of headroom to feed frames.

However, at Ultra settings, the scaling is less predictable. 1080p Ultra runs at 84.4 FPS, 1440p Ultra at 59.2 FPS, and 4K Ultra at 32.2 FPS. The 1080p to 1440p drop is 25.2 FPS (30%), but the 1440p to 4K drop is 27 FPS (46%). This steeper decline at 4K indicates that the RTX 3080 Ti’s 34.10 TFLOPS of FP32 compute is being pushed to its limits by the Ultra preset’s shading complexity.

The most revealing data point is the High preset. At 1080p, High runs at 127.9 FPS, but at 1440p it drops to 84.4 FPS — a 34% reduction that closely mirrors the Low preset’s scaling. Yet at 4K, High yields 49.8 FPS, which is disproportionately lower than the expected 42 FPS if scaling remained linear. This suggests that at 4K High, the game begins to tax both the GPU’s memory bandwidth (912.4 GB/s) and the CPU’s ability to manage the increased pixel workload.

The implication is that Archeage’s engine is not well-optimized for 4K rendering. The 49.8 FPS at 4K High versus the 84.4 FPS at 1440p High shows a 41% penalty, whereas the Low preset only suffers a 43% penalty from 1440p to 4K. This near-identical scaling across presets suggests the CPU’s 16 MB of L3 cache and 8 Zen 3 cores are handling the game’s MMO logic, while the GPU’s 12 GB VRAM is sufficient but not the limiting factor — the engine’s draw call overhead appears to constrain high-resolution performance.

How This Combo Ranks

With a rank of 466 out of 1727 combos, this pairing sits in the 73rd percentile of tested systems for Archeage. This is notably lower than the individual component percentiles — the CPU is at the 83rd percentile and the GPU is also at the 83rd percentile — meaning the combination underperforms what the parts suggest on paper.

The discrepancy points to a pairing bottleneck. The Ryzen 7 5700G uses PCIe Gen 3 with 16 lanes, while the RTX 3080 Ti supports PCIe 4.0 x16. While this interface difference rarely impacts gaming at 1080p, the data shows that at 4K Ultra, the combo produces just 32.2 FPS, which is 38% lower than the 4K Medium result of 70.2 FPS. This gap is too large to be explained by GPU compute alone, suggesting the CPU’s 3.80 GHz base clock and 4.60 GHz boost clock cannot consistently feed the GPU at Ultra settings.

The rank also reflects the game’s age. Archeage released in January 2014, predating the Zen 3 architecture by seven years. The game’s single-threaded logic likely cannot utilize all 16 threads of the 5700G, and the 3.80 GHz base clock is modest by modern standards. In contrast, the GPU’s nearest rival, the RTX 3090, scores only 0.5% higher on average, yet the 5700G’s nearest rival, the Ryzen 7 6800U, is 0.3% slower — so the CPU is the weaker link in this pairing.

GPU Role

The RTX 3080 Ti brings substantial resources to this pairing: 12 GB of GDDR6X memory, 10240 shading units, 320 TMUs, and 112 ROPs. The memory operates at 19 Gbps effective on a 384-bit bus, delivering 912.4 GB/s of bandwidth. For Archeage, a game from 2014, this bandwidth is far in excess of what texture streaming requires, which explains why Low and Medium presets achieve such high frame rates.

The GPU’s clock behavior provides insight into its role. The base clock is 1365 MHz with a boost of 1665 MHz, and the card draws up to 350 W. In the measured data, the GPU appears to be the primary driver of performance at Low and Medium settings across all resolutions. At 1080p Low, the combo hits 207.8 FPS, which is near the practical limit for MMO gameplay given the CPU’s single-thread score of 2,930 in Cinebench R23.

However, at Ultra settings, the GPU’s limitations become apparent. The 34.10 TFLOPS of FP32 compute is substantial, but the game’s Ultra preset appears to introduce effects that disproportionately tax the memory subsystem. The 4K Ultra result of 32.2 FPS is 54% lower than the 4K Medium result, even though the GPU’s compute capability is identical. This suggests that the Ultra preset increases draw distances and particle effects, which require more frequent memory accesses — and the GPU’s 12 GB VRAM, while large, may not have the optimal access pattern for this older engine.

The GPU’s nearest rival, the RTX 3090, is only 0.5% faster in average benchmarks, yet the 3080 Ti’s 83rd percentile ranking shows it outperforms most GPUs. In Archeage specifically, the data indicates that the GPU is rarely the bottleneck except at 4K Ultra, where its 186.5 GPixel/s pixel rate and 532.8 GTexel/s texture rate are insufficient for the preset’s demands.

Measured FPS Breakdown

At 1920x1080, the combo delivers a wide range of performance. Low settings achieve 207.8 FPS, Medium reaches 189.5 FPS, High runs at 127.9 FPS, and Ultra drops to 84.4 FPS. The gap between Low and Medium is only 18.3 FPS (9%), while the jump from Medium to High costs 61.6 FPS (33%). This suggests that High and Ultra introduce expensive effects that halve performance relative to Medium.

At 2560x1440, the pattern shifts. Low yields 140.1 FPS, Medium 128.9 FPS, High 84.4 FPS, and Ultra 59.2 FPS. The Low-to-Medium difference narrows to 11.2 FPS (8%), but the Medium-to-High drop widens to 44.5 FPS (35%). Ultra barely maintains 60 FPS, indicating that 1440p Ultra is only suitable for players who prioritize visuals over frame rate.

At 3840x2160, performance becomes constrained. Low runs at 80.5 FPS, Medium at 70.2 FPS, High at 49.8 FPS, and Ultra at 32.2 FPS. The Low-to-Medium gap is 10.3 FPS (13%), which is the smallest relative difference across all resolutions. The High-to-Ultra drop is 17.6 FPS (35%), mirroring the 1440p pattern. Notably, 4K High produces the exact same FPS as 1440p High (49.8 vs 84.4 is not the same, but 4K High at 49.8 and 1440p Ultra at 59.2 are close), showing that resolution scaling is not linear.

The data reveals a consistent pattern: Medium settings offer the most stable frame rates relative to resolution, with only a 19% drop from 1080p to 4K (189.5 to 70.2 FPS is a 63% drop — correction: 189.5 to 70.2 is a 63% reduction). In contrast, Ultra drops 62% from 1080p to 4K (84.4 to 32.2), showing that the Ultra preset amplifies resolution sensitivity.

CPU Role

The AMD Ryzen 7 5700G provides 8 cores and 16 threads based on the Zen 3 Cezanne architecture, built on TSMC’s 7 nm process with 10,700 million transistors. Its base clock is 3.80 GHz with a boost of 4.60 GHz, and it has 16 MB of L3 cache plus 512 KB of L2 per core. The CPU’s TDP is 65 W, which is modest for a desktop part, and it features Radeon Vega 8 integrated graphics — though the RTX 3080 Ti renders all frames in these tests.

The CPU’s benchmark results show strong multi-threaded performance: 20,755 in Cinebench R23 multi-core and 2,930 in single-core. The 16-thread 3DMark score of 6,629 is nearly identical to the max-thread score of 6,627, indicating the CPU scales well up to 16 threads. However, the single-thread 3DMark score of 899 is relatively low, which matters for Archeage’s MMO engine.

The measured FPS data suggests the CPU becomes a bottleneck at high frame rates. At 1080p Low, the combo achieves 207.8 FPS, but the CPU’s single-thread performance likely caps this — the 2,930 Cinebench R23 single-core score is decent but not exceptional. The fact that 1080p High (84.4 FPS) exactly matches 1440p High (84.4 FPS) is a strong indicator that the CPU is limiting performance at these settings, not the GPU.

The CPU’s nearest rival, the Ryzen 7 6800U, scores 0.3% higher on average, yet the 6800U is a mobile part with lower sustained clocks. This suggests the 5700G’s 65 W TDP and 3.80 GHz base clock are adequate for most workloads, but Archeage’s reliance on single-thread performance means the 4.60 GHz boost clock is the critical factor. In 4K Ultra (32.2 FPS), the CPU is likely waiting on the GPU, but at 1080p Low (207.8 FPS), the CPU is the limiting component — evidenced by the fact that increasing resolution from 1080p to 1440p at Low only drops FPS by 33% (207.8 to 140.1), which is less than the 100% pixel count increase, indicating the CPU maintains its frame throughput while the GPU takes on more work.

Hardware Specifications

AMD Ryzen 7 5700G

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3080 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 1665 MHz MHz
TDP 350 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700G + NVIDIA GeForce RTX 3080 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 80.5
3840x2160 Medium 70.2
3840x2160 High 49.8
3840x2160 Ultra 32.2
2560x1440 Low 140.1
2560x1440 Medium 128.9
2560x1440 High 84.4
2560x1440 Ultra 59.2
1920x1080 Low 207.8
1920x1080 Medium 189.5
1920x1080 High 127.9
1920x1080 Ultra 84.4

Archeage with Ryzen 7 5700G + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3080 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 7 5700G + RTX 3080 Ti

Explore FPS benchmarks for other games using this same hardware combination.