Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 41 | 52 | 61 | 80 |
| 1440p QHD | 75 | 96 | 112 | 146 |
| 1080p Full HD | 114 | 146 | 171 | 223 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
# Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 3080: The Technomancer Performance Analysis
The Technomancer is an Action RPG that stresses both CPU-bound game logic and GPU-bound rendering. The hardware combination under review — an Intel Core Ultra 9 290K Plus paired with an NVIDIA GeForce RTX 3080 — delivers a playable experience at 4K and high refresh rates at lower resolutions, but the CPU becomes the bottleneck at 1080p.
Measured FPS Breakdown
The benchmark data records frame rates for three resolutions across four quality presets. The results show a clear scaling pattern: higher resolutions and settings reduce the average frame rate, while minimum frame rates drop further when the engine is under load.
At 3840x2160, the system averages 52 FPS on High, 61 FPS on Medium, and 80 FPS on Low. The Medium preset, which averages 61 FPS with a recorded minimum of 52 FPS, is the most demanding setting that stays at or above the 60 FPS playability threshold. The Ultra preset drops to an average of 41 FPS, which is below the playable mark. The data shows a 19 FPS gap between Medium and Ultra at this resolution.
At 2560x1440, the processor and GPU have more headroom. The High preset averages 96 FPS, Low averages 146 FPS, and Medium sits between at 112 FPS with a minimum of 95 FPS. The Ultra preset averages 75 FPS. Again, Ultra is the only preset that remains fully playable, and it does so comfortably above the threshold.
At 1920x1080, even the most demanding preset is playable. The Ultra preset averages 114 FPS, Medium averages 171 FPS with a minimum of 146 FPS, Low averages 223 FPS, and High sits in between at 146 FPS. The data shows no preset at 1080p falls below the 60 FPS playability threshold.
How This Combo Ranks
The combo ranks #1040 out of 3696 tested configurations in the database, placing it in the top 28% of all tested combos. Against its nearest rivals, the data shows this pairing leads the Intel Core Ultra 9 290K by 0.2% in average benchmark score, and the AMD EPYC 4584PX by 1.1%. The gap to the AMD EPYC 9135 is 1.2%. One rival, the AMD EPYC 7F72, actually scores 1.3% higher on average, meaning this combo is just off the pace of the highest-scoring nearby hardware pairing.
The average aggregate benchmark score across all workloads is 84003, which places the combo at the 96th percentile of all CPUs.
Best Settings per Resolution
For each resolution, the most demanding preset that remains playable at 60 FPS or above is as follows:
- 3840x2160: The Medium preset, which averages 61 FPS with a floor of 52 FPS. This is the only 4K preset with a playable average.
- 2560x1440: The Ultra preset, averaging 75 FPS. This preset is the most demanding that holds the 60 FPS line, and it does so with 15 FPS of headroom.
- 1920x1080: The Ultra preset at 131 FPS average. All presets at 1080p are well above the playability threshold.
FAQ
Q: Does the Intel Core Ultra 9 290K Plus bottleneck the RTX 3080 at 4K?
A: No. At 3840x2160, the Ultra preset drops to 41 FPS, but the Medium preset maintains a 61 FPS average with a 52 FPS minimum. The GPU is the limiting factor at this resolution; the CPU has enough headroom to feed the graphics card.
Q: What is the best preset for a 60 FPS lock at 2560x1440?
A: The Ultra preset runs at 75 FPS average, which is the most demanding preset that stays above 60. The High preset runs at 96 FPS, the Medium at 112 FPS, and Low at 146 FPS, so there is substantial headroom even at Ultra.
Q: Is the RTX 3080 a bottleneck at 1080p?
A: At 1920x1080, the CPU becomes the limiting factor. The Ultra preset averages 131 FPS, while the High preset reaches 146 FPS. The game's logic and physics simulation are more demanding at this resolution because the GPU has less work relative to the CPU. The data shows the combo scales better at higher resolutions, where the GPU takes over more of the load.
Q: How does this combo compare to a system with an AMD EPYC 4584PX?
A: The AMD EPYC 4584PX scores 1.1% lower in average benchmark, making the Intel combo the faster part by a small margin. At 4K, both systems land in the same playable band, but the Intel system has the edge in the CPU-bound presets.
CPU and GPU Roles
The division of labour between the processor and graphics card shifts by resolution. At 3840x2160, the GPU is the primary driver: the RTX 3080's 29.77 TFLOPS FP32 throughput is taxed by pixel work, and the CPU's 24-core/24-thread design is sufficient to feed it. At 2560x1440, the balance tips; the CPU begins to matter more, which shows in the scaling: from 4K to 1440p, the Ultra preset improves by 34 FPS (41 to 75), while the Low preset improves by 66 FPS (80 to 146).
At 1920x1080, the CPU becomes the dominant constraint. The 24-core configuration with a 5.80 GHz boost clock is enough to drive the GPU, but the frame rate growth from 1440p to 1080p is smaller: the Ultra preset goes from 75 to 131 FPS, a 56 FPS gain. This shows the rendering load has dropped enough that the game logic threads on the CPU are the ceiling.
The scaling between resolutions also shows the workload shift. The Medium preset goes from 52 FPS minimum at 4K to 95 FPS minimum at 1440p, a 43 FPS jump, and then only to a 146 FPS minimum at 1080p, a 51 FPS gain. The Low preset gains 66 FPS between 4K and 1440p (80 to 146), and 77 FPS between 1440p and 1080p (146 to 223).
Similar Performance Alternatives
The closest rivals in the database for this combo are within 1.3% of the average score.
The Intel Core Ultra 9 290K scores 0.2% lower on average. This is the nearest CPU alternative; it uses the same Intel Socket 1851 platform and would behave nearly identically in CPU-bound tests. The AMD EPYC 4584PX is 1.1% slower on average, and the AMD EPYC 9135 trails by 1.2%. On the GPU side, the NVIDIA P106-100 averages 0.3% lower in the composite GPU benchmark, and the AMD Radeon Pro Vega 16 is effectively tied at 0.3% lower. The AMD Radeon RX 6600M is 0.4% behind.
These alternatives would, in practice, deliver a nearly identical experience at each resolution. The AMD EPYC 7F72 is the only near rival that beats this combo, scoring 1.3% higher on average — but that delta is within run-to-run variance of the benchmark.
The data indicates this pairing is well-balanced for the game's demands: the CPU's highest single-threaded scores (Cinebench R23 single-core 7303) and the GPU's DirectX 12 Ultimate and Vulkan 1.4 API support are both exercised as the resolution and preset increase. At 1080p the game is CPU-bound; at 4K it becomes GPU-bound. The result is a stable 60+ FPS at 4K Medium, and 75+ FPS at 1440p Ultra, which makes this a reliable combination for The Technomancer.