Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
121 FPS
Ultra 1080p Measured
62 FPS

1440p (2K / QHD)

Low 1440p Measured
79 FPS
Ultra 1440p Measured
41 FPS

4K (Ultra HD)

Low 4K Measured
44 FPS
Ultra 4K Measured
22 FPS
12.5ms Frame Time
19ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 93,785
Graphics Card
Required 27,947
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 29 33 44
1440p QHD 41 52 61 79
1080p Full HD 62 80 93 121

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 80
1920x1080 Low 121
1920x1080 Medium 93
1920x1080 Ultra 62
2560x1440 High 52
2560x1440 Low 79
2560x1440 Medium 61
2560x1440 Ultra 41
3840x2160 High 29
3840x2160 Low 44
3840x2160 Medium 33
3840x2160 Ultra 22

Performance Analysis: The Technomancer on Your System

The Technomancer, a 2016 action RPG from Spiders, asks very little of modern hardware, and the pairing of Intel's Core Ultra 7 270K Plus with the Arc B570 makes that plain: benchmark data shows this combination clearing 60 FPS at every quality preset at 1080p and at reduced settings at 1440p, while native 4K falls short across the board. The Arc B570 sits in the 65th percentile of all GPUs with an average benchmark score of 20556, and the Core Ultra 7 270K Plus ranks in the 96th percentile of all CPUs with an average score of 93785 — a lopsided pairing where the processor vastly outclasses the graphics card, which is exactly what you want for an older title that leans on raw frame delivery rather than heavy compute.

Similar Performance Alternatives

On the graphics side, the Arc B570's performance neighborhood is tightly clustered. The NVIDIA GeForce RTX 3070 Mobile posts an average score of 20534, just 0.1 percent behind the B570, meaning laptops or desktops built around that mobile part will behave nearly identically in The Technomancer. Intel's own Arc A750 is even closer at 20582, a mere 0.1 percent ahead — effectively the same card for this game's purposes. The NVIDIA Quadro M4000M trails by 0.4 percent with a score of 20480, and the AMD Radeon R9 M390X leads by 0.5 percent at 20662. All four sit within half a percent of one another, so any of these GPUs will produce frame rates in The Technomancer within a hair of the B570's measured results.

The CPU picture is similar. The Intel Xeon 6520P matches the Core Ultra 7 270K Plus exactly, with an average score of 93786 against 93785 — a 0 percent delta. The AMD EPYC 4564P scores 95183, 1.5 percent ahead; the EPYC 9175F is 1.9 percent ahead at 95615; and the EPYC 4565P leads by 2.1 percent at 95764. Given that the 270K Plus already sits in the 96th percentile of all CPUs, none of these alternatives would change the outcome in The Technomancer — the game is GPU-bound at every tested resolution, and any of these workstation-class processors would keep the Arc B570 fully fed.

CPU and GPU Roles

The scaling data makes the division of labor unambiguous. Moving from 1080p to 1440p at Medium drops the average from 93 to 61 FPS, a loss of roughly a third of the frame rate for a pixel-count increase that the CPU alone would not cause. Dropping settings from Ultra to Low at 1080p lifts the average from 62 to 121 FPS — nearly doubling throughput purely through graphics settings. Both patterns point the same direction: the Arc B570 is the limiting component at every resolution tested.

That is expected given the class gap. The 270K Plus scores 44253 in Cinebench R23 multi-core and 2439 in single-core, with a PassMark single-thread score of 5068 and a physics score of 4064. A 2016 action RPG has no workload that stresses a 24-core, 24-thread processor boosting to 5.50 GHz; the CPU's role here is simply to stay out of the way, and it does. The Arc B570, with 2304 shading units, 11.52 TFLOPS of FP32 throughput, and 380 GB/s of memory bandwidth on a 160-bit bus, determines every frame rate in the measured table. The combo's rank — 2972 of 3696 hardware combinations tested in this game — reflects that mid-tier GPU ceiling, not any processor weakness.

Best Settings per Resolution

At 1920x1080, the most demanding preset that holds at or above 60 FPS is Ultra, delivering an average of 62 FPS. That is a comfortable if not generous margin — Low hits 121 FPS, Medium 93, High 80 — so players wanting headroom can drop to High and gain roughly 18 frames on average.

At 2560x1440, Medium is the ceiling for 60 FPS play at 61 FPS average, backed by a minimum of 52 and a maximum of 70. High falls to 52 FPS and Ultra to 41, both below threshold. Low remains the framerate option at 79 FPS.

At 3840x2160, no preset clears 60 FPS. Low manages 44 FPS, Medium 33, High 29, and Ultra just 22. Native 4K is off the table for this configuration.

The Verdict

Yes — this PC runs The Technomancer well at mainstream resolutions, with one clear exception. At 1920x1080, every preset from Low through Ultra is playable, and Ultra is the recommended setting at 62 FPS average. At 2560x1440, Low and Medium clear the 60 FPS bar, with Medium the best playable option at 61 FPS average. At 3840x2160, the verdict is negative: the playable settings list is empty, and even Low at 44 FPS falls well short. Players on a 4K display should render at a lower internal resolution instead. Across the board, the limiting factor is the Arc B570; the Core Ultra 7 270K Plus never comes close to being the bottleneck in this title.

Measured FPS Breakdown

1920x1080:

  • Low: 121 FPS average
  • Medium: 93 FPS average (79 min, 107 max)
  • High: 80 FPS average
  • Ultra: 62 FPS average

2560x1440:

  • Low: 79 FPS average
  • Medium: 61 FPS average (52 min, 70 max)
  • High: 52 FPS average
  • Ultra: 41 FPS average

3840x2160:

  • Low: 44 FPS average
  • Medium: 33 FPS average (28 min, 39 max)
  • High: 29 FPS average
  • Ultra: 22 FPS average

The min/max data, where captured, reinforces the averages. At 1440p Medium, the 52 FPS minimum sits right at the 1440p High average — dips below 60 will be felt in busy scenes. At 4K Medium, the range of 28 to 39 FPS means even best-case moments stay far below playable. At 1080p Medium, the minimum of 79 FPS keeps the experience consistently smooth, and the 107 FPS maximum shows how much headroom the B570 retains when the scene cooperates.

FAQ

Q: Can the Intel Arc B570 run The Technomancer at 4K?

A: No. At 3840x2160, no preset reaches the 60 FPS threshold — Low averages 44 FPS, Medium 33, High 29, and Ultra 22.

Q: What is the best-looking setting combination for 60 FPS gameplay?

A: 1920x1080 at Ultra, which averages 62 FPS. At 2560x1440, the best playable preset is Medium at 61 FPS average.

Q: Does the CPU or GPU limit performance in this game?

A: The GPU. Frame rates scale heavily with resolution and settings — 1080p Medium runs at 93 FPS versus 61 at 1440p — while the 96th-percentile Core Ultra 7 270K Plus has ample headroom for a 2016 title.

Q: Which GPUs perform nearly identically to the Arc B570?

A: The Intel Arc A750 (0.1 percent ahead), NVIDIA GeForce RTX 3070 Mobile (0.1 percent behind), NVIDIA Quadro M4000M (0.4 percent behind), and AMD Radeon R9 M390X (0.5 percent ahead).

Q: How smooth is 1440p Medium gameplay in practice?

A: The measured range is 52 to 70 FPS around a 61 FPS average, so frame rates will dip below 60 during demanding moments.

Q: How does this hardware combo rank in The Technomancer?

A: It ranks 2972 out of 3696 tested combinations — a mid-pack result driven by the Arc B570's 65th-percentile GPU standing rather than the processor.