Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
77 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
10.2ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 64,640
Graphics Card
Required 27,947
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 41 54
1440p QHD 50 64 75 98
1080p Full HD 77 98 115 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 150
1920x1080 Medium 115
1920x1080 Ultra 77
2560x1440 High 64
2560x1440 Low 98
2560x1440 Medium 75
2560x1440 Ultra 50
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: The Technomancer on Your System

The Intel Core Ultra 7 265 and NVIDIA GeForce RTX 5050 combination delivers a playable experience in The Technomancer at 1440p and 1080p, but falls short of the 60 FPS threshold at 4K. The data shows a clear performance ceiling at 3840x2160, where even the Low preset averages 54 FPS, leaving no playable settings at that resolution. At 2560x1440, the High preset achieves 64 FPS on average, while at 1920x1080, the Ultra preset runs at 77 FPS, indicating that the system is well-suited for mainstream high-refresh-rate gaming at standard resolutions.

Similar Performance Alternatives

The CPU and GPU in this system occupy distinct positions relative to their nearest rivals. The Intel Core Ultra 7 265 posts an average benchmark score of 64640, placing it at the 93rd percentile among all CPUs. Its closest competitor is the AMD EPYC 4464P, which scores 64823, a delta of -0.3%, meaning the Intel part trails by a negligible margin. The Intel Core Ultra 7 265F is nearly identical, with a score of 64438 and a delta of +0.3%, while the AMD EPYC 7343 (64202, +0.7%) and AMD EPYC 9124 (65104, -0.7%) round out the immediate comparison group. These differences are within 1% of each other, so any of these processors would deliver essentially the same frame rates in The Technomancer, provided the GPU remains the limiting factor.

On the graphics side, the RTX 5050 achieves an average benchmark score of 21035, sitting at the 66th percentile of all GPUs. Its nearest rival is the AMD Radeon RX Vega M GL, which scores 21153 with a delta of -0.6%, making the two effectively interchangeable. The AMD Radeon HD 8970M scores 21237 (-1%), the AMD Radeon RX 5600 XT scores 20713 (+1.6%), and the NVIDIA RTX A4000 Mobile scores 21379 (-1.6%). All of these GPUs fall within a 2% performance band of the RTX 5050, so users upgrading from or considering any of these alternatives should expect similar average frame rates in this title. The RX 5600 XT is the only rival that sits slightly below the RTX 5050, while the RTX A4000 Mobile is the fastest of the group by a small margin.

Best Settings per Resolution

At 3840x2160, the RTX 5050 cannot maintain a playable 60 FPS at any preset. The High preset averages 35 FPS, Medium averages 41 FPS, Low averages 54 FPS, and Ultra averages 28 FPS. Since no setting reaches 60 FPS, there is no "best settings" recommendation at this resolution; the verdictByResolution data confirms this with an empty playableSettings array. The Low preset comes closest to the threshold but still falls 6 FPS short, so users targeting 4K would need to reduce resolution or accept sub-60 frame rates.

At 2560x1440, the situation improves considerably. The High preset averages 64 FPS, which clears the 60 FPS threshold and is the most demanding setting that achieves playability. The Medium preset runs at 75 FPS, and Low runs at 98 FPS, but High offers the best visual quality while staying above 60. The Ultra preset drops to 50 FPS, making it unplayable by the 60 FPS standard. Therefore, High is the recommended setting for 1440p, balancing fidelity and performance.

At 1920x1080, the system has ample headroom. The Ultra preset averages 77 FPS, which is both the highest visual quality option and comfortably above the threshold. Medium runs at 115 FPS, High at 98 FPS, and Low at 150 FPS. Since Ultra is playable, it is the recommended setting for 1080p, offering the full visual experience without sacrificing smoothness. The data shows no need to compromise at this resolution.

CPU and GPU Roles

The performance scaling across resolutions reveals how the CPU and GPU divide responsibilities in The Technomancer. At 1080p, the GPU is the primary bottleneck, as evidenced by the large frame rate differences between presets. Moving from Low (150 FPS) to Ultra (77 FPS) represents a 73 FPS drop, indicating that the RTX 5050's shading units, TMUs, and ROPs are being pushed harder at higher settings. The CPU, with its 20 cores and 20 threads, has ample headroom at this resolution, as even the most demanding preset stays well above 60 FPS.

At 1440p, the GPU's load increases, but the CPU still keeps pace. The frame rate gap between Low (98 FPS) and Ultra (50 FPS) is 48 FPS, slightly smaller than at 1080p. This suggests that the GPU is becoming more saturated, but the Core Ultra 7 265 still has enough single-thread performance (Cinebench R23 single-core score of 5960) to feed the graphics card without causing a CPU bottleneck. The High preset at 64 FPS indicates that the system is balanced at this resolution, with neither component dramatically outmatching the other.

At 4K, the GPU is overwhelmingly the limiting factor. The difference between Low (54 FPS) and Ultra (28 FPS) is 26 FPS, showing that even the lowest settings cannot reach 60 FPS. The CPU's role diminishes further, as the RTX 5050's 8 GB of GDDR6 memory and 128-bit bus width (320.0 GB/s bandwidth) struggle to fill frames at this resolution. The passmark G3D score of 17326 and 3DMark Steel Nomad score of 2502 reflect this limitation, with the GPU's 13.17 TFLOPS of FP32 compute proving insufficient for 4K at playable frame rates.

The Verdict

The verdictByResolution data provides a clear answer: this PC can run The Technomancer at 1440p and 1080p, but not at 4K. At 1920x1080, all four presets (Low, Medium, High, Ultra) are playable, with the Ultra preset averaging 77 FPS. This is the recommended resolution and setting combination for the best visual experience. At 2560x1440, three presets (Low, Medium, High) clear the 60 FPS threshold, with High being the best choice at 64 FPS. The Ultra preset falls to 50 FPS and is not recommended.

At 3840x2160, no preset achieves 60 FPS. The closest is Low at 54 FPS, which is still below the playable threshold. Users with a 4K display would need to lower the resolution to 1440p or accept reduced frame rates, making this resolution unsuitable for smooth gameplay with this hardware. The combo's rank of 2269 out of 3696 tested combinations indicates that it sits in the lower-middle tier of systems tested for this game, reflecting the GPU's mid-range positioning (66th percentile) rather than the CPU's strong standing (93rd percentile).

Measured FPS Breakdown

At 3840x2160, the measured data shows a narrow range of performance across settings. The High preset averages 35 FPS, Medium averages 41 FPS with a minimum of 35 and maximum of 48, Low averages 54 FPS, and Ultra averages 28 FPS. The Medium preset's min/max values indicate some frame time variance, but the overall picture is consistent: the RTX 5050 cannot deliver smooth gameplay at this resolution. The gap between Low and Ultra is 26 FPS, showing that settings have a moderate impact but cannot bridge the gap to 60 FPS.

At 2560x1440, the frame rates are more varied. Low averages 98 FPS, Medium averages 75 FPS with a minimum of 64 and maximum of 87, High averages 64 FPS, and Ultra averages 50 FPS. The Medium preset's minimum of 64 FPS is just above the threshold, while High's average of 64 FPS suggests occasional dips below 60 could occur, though the data does not provide a minimum for High. The progression from Low to Ultra shows a 48 FPS drop, indicating that visual settings have a significant impact at this resolution.

At 1920x1080, the system performs strongly. Low averages 150 FPS, Medium averages 115 FPS with a minimum of 98 and maximum of 132, High averages 98 FPS, and Ultra averages 77 FPS. The Medium preset's minimum of 98 FPS is well above the threshold, and even Ultra's average of 77 FPS provides a comfortable margin. The 73 FPS difference between Low and Ultra demonstrates that the GPU is the active bottleneck, but the overall performance is sufficient for high-refresh-rate displays at 1080p.

How This Combo Ranks

The Intel Core Ultra 7 265 and RTX 5050 combination ranks 2269 out of 3696 tested configurations for The Technomancer, placing it in the 61st percentile of all tested systems. This ranking is consistent with the GPU's position (66th percentile) but below the CPU's strong 93rd percentile standing, confirming that the graphics card limits overall gaming performance. The rank suggests that roughly 61% of tested systems perform worse, while 39% perform better, making this a mid-tier configuration for this specific title.

The gap between the CPU's high percentile and the combo's mid-tier rank highlights the importance of the GPU in this game. The RTX 5050's nearest rivals (RX Vega M GL, HD 8970M, RX 5600 XT, RTX A4000 Mobile) all produce similar average benchmark scores, so swapping to any of these would likely yield comparable frame rates in The Technomancer. The CPU's nearest rivals, by contrast, are enterprise-grade EPYC processors that would not change gaming performance meaningfully, as the GPU remains the bottleneck across all tested resolutions.

FAQ

Q: Can this PC run The Technomancer at 4K resolution?

A: No. At 3840x2160, the highest average FPS is 54 on the Low preset, which is below the 60 FPS playable threshold. The verdictByResolution data lists no playable settings at this resolution.

Q: What is the best preset at 1440p for this system?

A: The High preset is the most demanding option that stays at or above 60 FPS, averaging 64 FPS. Medium runs at 75 FPS and Low at 98 FPS, but High offers the best visual quality while remaining playable.

Q: How does the RTX 5050 compare to its nearest rival, the RX 5600 XT?

A: The RTX 5050 has an average benchmark score of 21035, while the RX 5600 XT scores 20713, a delta of +1.6%. This means the RTX 5050 is approximately 1.6% faster on average, a difference unlikely to be noticeable in actual gameplay.

Q: Is the CPU or GPU more important for this game at 1080p?

A: The GPU is the primary factor at 1080p. Frame rates drop from 150 FPS on Low to 77 FPS on Ultra, a 73 FPS difference, while the CPU's 20 cores and high single-thread performance (Cinebench R23 single-core score of 5960) provide sufficient headroom to avoid bottlenecking.

Q: What is the playable settings list at 2560x1440?

A: The playable settings are Low (98 FPS), Medium (75 FPS), and High (64 FPS). Ultra is not playable, averaging 50 FPS.

Q: What does the combo rank of 2269 out of 3696 mean for this hardware?

A: It indicates that this combination performs better than 61% of all tested systems for The Technomancer. The ranking is driven primarily by the GPU's 66th percentile performance, while the CPU's 93rd percentile standing has less influence on gaming results.