Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
298 FPS
Ultra 1080p Measured
152 FPS

1440p (2K / QHD)

Low 1440p Measured
195 FPS
Ultra 1440p Measured
100 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
55 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 48,995
Graphics Card
Required 27,947
Your GPU 54,247

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 70 82 107
1440p QHD 100 128 149 195
1080p Full HD 152 195 229 298

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 195
1920x1080 Low 298
1920x1080 Medium 229
1920x1080 Ultra 152
2560x1440 High 128
2560x1440 Low 195
2560x1440 Medium 149
2560x1440 Ultra 100
3840x2160 High 70
3840x2160 Low 107
3840x2160 Medium 82
3840x2160 Ultra 55

Performance Analysis: The Technomancer on Your System

The Technomancer, a 2016 Action RPG, presents a demanding workload that stresses both CPU and GPU depending on the resolution and preset selected. The measured data for the Intel Core Ultra 5 245 paired with the NVIDIA GeForce RTX 4080 shows a system capable of high refresh rates at standard resolutions, with performance scaling predictably as resolution and graphical fidelity increase. This analysis breaks down the measured FPS, optimal settings, and component roles based on benchmark results.

Measured FPS Breakdown

At 1920x1080, the combination delivers exceptional performance across all presets. The average frame rate ranges from 298 FPS at Low settings to 152 FPS at Ultra. The Medium preset shows an average of 229 FPS, with a minimum of 194 FPS and a maximum of 263 FPS. High settings produce an average of 195 FPS. This data indicates that at 1080p, the system is rarely constrained, with even the most demanding preset maintaining a frame rate well above any common target.

Moving to 2560x1440, performance remains robust but shows the expected scaling. Low settings yield an average of 195 FPS, while High settings drop to 128 FPS. The Medium preset averages 149 FPS, with a minimum of 127 FPS and a maximum of 172 FPS. Ultra settings at this resolution still manage a very high average of 100 FPS. The results confirm that 1440p is well within the capabilities of this hardware, providing a smooth experience even at the highest quality level.

At 3840x2160, the GPU becomes the primary bottleneck, yet the system still delivers playable performance. Low settings produce an average of 107 FPS, while Medium settings average 82 FPS, with a minimum of 70 FPS and a maximum of 94 FPS. High settings reduce the average to 70 FPS. Ultra settings at 4K are the only configuration that falls below the 60 FPS threshold, averaging 55 FPS. The scaling between presets is significant, with a 52 FPS difference between Low and Ultra, highlighting the heavy load at this resolution.

Best Settings per Resolution

For 1920x1080, the best settings are Ultra, which achieves an average of 152 FPS. This is the most demanding preset that remains far above the 60 FPS threshold, allowing for the highest visual quality without sacrificing smoothness. The data shows no need to compromise at this resolution.

At 2560x1440, the best settings are also Ultra, with an average of 100 FPS. This demonstrates that the hardware can handle the highest graphical preset at this resolution while maintaining a frame rate comfortably above the playability threshold. The margin of 40 FPS above the 60 FPS mark provides headroom for demanding scenes.

For 3840x2160, the best settings that stay at or above 60 FPS are High, which averages 70 FPS. While Ultra settings are not playable by this metric, High offers a substantial visual upgrade over Medium while still clearing the threshold. The 70 FPS average is only 10 FPS above the playable line, indicating that this is the optimal balance for 4K gaming with this setup.

CPU and GPU Roles

The data reveals a clear shift in component importance depending on resolution. At 1920x1080, the CPU plays a more significant role, as the frame rates are extremely high and likely limited by processing power rather than the GPU. The difference between Low and Ultra settings is 146 FPS, which shows that even at lower resolutions, the GPU still has a large impact, but the absolute frame rates suggest the Intel Core Ultra 5 245 is keeping up with the RTX 4080's output.

At 2560x1440, the balance begins to tilt toward the GPU. The average frame rates drop, but the Ultra preset still achieves 100 FPS. The scaling from Low to Ultra is 95 FPS, a smaller absolute difference than at 1080p, which indicates the GPU is becoming a more limiting factor as the pixel count increases.

At 3840x2160, the GPU is clearly the dominant component. The performance drop is substantial, with the Ultra preset falling to 55 FPS. The CPU's role diminishes as the resolution increases, and the RTX 4080's capabilities become the primary determinant of frame rate. The 52 FPS difference between Low and Ultra at 4K, compared to larger gaps at lower resolutions, confirms that the GPU is the bottleneck, as the CPU has more headroom to feed frames at lower settings.

Similar Performance Alternatives

Based on the composite benchmark scores, the Intel Core Ultra 5 245 has several near neighbors in performance. The AMD Ryzen 7 PRO 5755G scores approximately 0.4% lower, placing it within a negligible performance difference. The AMD Ryzen 9 7900 is also 0.5% lower, while the Intel Xeon Gold 5318H is 0.6% higher. The Intel Core i5-14600K is the closest rival, scoring 0.8% higher. For gaming, these differences are minor, so any of these CPUs would deliver similar frame rates in The Technomancer, especially at higher resolutions where the GPU is the bottleneck.

For the NVIDIA GeForce RTX 4080, the nearest rival is the RTX 4080 SUPER, which scores 0.1% higher, making it effectively identical in performance. The AMD Radeon Pro W5700X scores 1.1% lower, while the AMD Radeon RX 6750 GRE 12 GB is 2.6% lower, and the AMD Radeon 8060S is 2.7% lower. These small deltas mean that a system with an RTX 4080 SUPER would behave nearly identically in this game, while the AMD options would show a slight but not drastic reduction in frame rates.

The Verdict

This PC can run The Technomancer effectively at most resolutions and settings. The verdict by resolution confirms that at 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the best experience at Ultra averaging 152 FPS. At 2560x1440, the same four presets are playable, with Ultra achieving 100 FPS. At 3840x2160, the playable settings are Low, Medium, and High, with High providing the best quality at 70 FPS. The Ultra preset at 4K falls below the 60 FPS threshold with an average of 55 FPS, making it the only configuration that is not playable. For users prioritizing 4K gaming, selecting High settings is the recommended path, as it balances visual fidelity with a smooth frame rate.

How This Combo Ranks

The combination of the Intel Core Ultra 5 245 and the NVIDIA GeForce RTX 4080 ranks 213th out of 3696 tested combinations for this game. This places the system in the top percentile of all tested hardware configurations, indicating that it is a high-end setup capable of delivering excellent performance. The rank reflects the strong performance of both components, with the CPU's high single-threaded capabilities and the GPU's substantial rasterization power contributing to a favorable result in this Action RPG.

FAQ

Q: What is the average FPS at 1920x1080 with Ultra settings?

A: The average FPS at 1920x1080 with Ultra settings is 152 FPS.

Q: Can this system run The Technomancer at 4K with Ultra settings?

A: No, at 3840x2160 with Ultra settings, the average FPS is 55, which falls below the 60 FPS playable threshold. The best playable setting at 4K is High, which averages 70 FPS.

Q: How does the RTX 4080 compare to the RTX 4080 SUPER?

A: The RTX 4080 SUPER scores 0.1% higher in average benchmarks, making it a near-identical performer in this game.

Q: What is the minimum FPS recorded at 2560x1440 with Medium settings?

A: The minimum FPS recorded at 2560x1440 with Medium settings is 127 FPS.

Q: Which component is more important at 3840x2160?

A: At 3840x2160, the GPU is the dominant component, as the performance drop between Low and Ultra settings is significant, and the CPU has less influence on frame rates at this resolution.

Q: What is the combo rank for this CPU and GPU pairing in The Technomancer?

A: The combo ranks 213rd out of 3696 tested combinations, placing it in the upper echelon of all tested hardware.