Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 70 | 82 | 107 |
| 1440p QHD | 100 | 128 | 149 | 195 |
| 1080p Full HD | 152 | 195 | 229 | 298 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The Technomancer, a 2016 Action RPG, presents an interesting scaling test for the Intel Core Ultra 5 225 paired with the NVIDIA GeForce RTX 4080. The benchmark data reveals a combination that is overwhelmingly capable, with the primary question being not if it can run the game, but rather how much graphical headroom remains at the highest settings. The measured results across three resolutions paint a picture of a system that comfortably dominates this title, leaving significant performance on the table even at 4K.
Measured FPS Breakdown
The FPS data for this combo is comprehensive, covering three resolutions and four quality presets. At 1920x1080, the system is essentially unburdened. The Low preset produces an average of 298 FPS, while the Medium preset averages 229 FPS with a minimum of 194 and a maximum of 263. Stepping up to High yields an average of 195 FPS, and the most demanding Ultra preset still averages 152 FPS. These numbers indicate that at 1080p, the framerate is primarily limited by the engine's simulation speed rather than the hardware's rendering capacity.
Moving to 2560x1440 shows a predictable but moderate decline in raw throughput. The Low preset averages 195 FPS, and Medium drops to 149 FPS, with a minimum of 127 and a maximum of 172. The High preset maintains a strong 128 FPS average, while Ultra remains highly playable at 100 FPS. The transition from 1080p to 1440p shows a performance hit of roughly 35% on the Ultra preset, which is a typical scaling factor for a game of this era.
At 3840x2160, the RTX 4080 finally begins to show some strain, though the results are still impressive. The Low preset averages 107 FPS, and Medium drops to 82 FPS, with a minimum of 70 and a maximum of 94. The High preset is the sweet spot, averaging 70 FPS. However, the Ultra preset falls below the 60 FPS playability threshold, averaging just 55 FPS. This is the only configuration in the entire dataset where the combo fails to maintain a 60 FPS average, highlighting the exponential cost of 4K resolution combined with maximum settings.
CPU and GPU Roles
The data strongly suggests that the NVIDIA GeForce RTX 4080 is the dominant component in this pairing for The Technomancer, with the Intel Core Ultra 5 225 providing ample support. The evidence lies in the resolution scaling. When moving from 1080p to 1440p, the average FPS on the Ultra preset drops from 152 to 100, a 34% reduction. Moving from 1440p to 4K on the same preset drops the average from 100 to 55, a further 45% reduction. This steep, consistent decline with increasing resolution is the classic signature of a GPU-bound workload.
The CPU's role becomes more apparent at lower resolutions and presets. At 1080p with the Low preset, the system achieves 298 FPS. This figure is likely approaching the point where the CPU's single-thread performance, evidenced by its Cinebench R23 single-core score of 3655, could become a factor. However, the fact that the 1080p Ultra preset still yields 152 FPS suggests the CPU is not a bottleneck in any practical sense for this game. The Core Ultra 5 225's 10 cores and 10 threads, with a boost clock of 4.90 GHz, are more than sufficient to feed the RTX 4080, even in a title with the simulation overhead of an Action RPG.
The scaling between presets at a fixed resolution further confirms the GPU-centric nature. At 4K, the difference between Low and Ultra presets is a 52 FPS swing (107 vs 55). At 1080p, the same preset swing is 146 FPS (298 vs 152). This widening gap at lower resolutions is because the CPU can maintain a higher baseline framerate, leaving more headroom for the GPU to flex its muscles as the pixel count decreases. The RTX 4080, with its 9728 shading units and 48.74 TFLOPS of FP32 performance, is clearly the engine driving these numbers.
Best Settings per Resolution
The benchmark data provides clear guidance on the optimal settings for a 60 FPS experience at each resolution. At 1920x1080, the system is so powerful that the most demanding preset is entirely viable. The Ultra preset averages 152 FPS, which is not only above the 60 FPS threshold but also well above the refresh rate of most standard monitors. There is no reason to compromise on visual fidelity here.
At 2560x1440, the story is similar. The Ultra preset averages 100 FPS, comfortably clearing the 60 FPS threshold. This makes 1440p Ultra the recommended configuration for users with high-refresh-rate 1440p displays, as the performance headroom is substantial. The data indicates that this combo can deliver a buttery-smooth experience at this resolution without needing to dial back any settings.
The situation changes at 3840x2160. The Ultra preset fails to maintain 60 FPS, averaging only 55 FPS. The most demanding preset that stays at or above 60 FPS is High, which averages 70 FPS. This provides a solid margin over the threshold and is the clear recommendation for 4K gaming. While the Medium preset (82 FPS) and Low preset (107 FPS) offer even higher framerates, the High preset strikes the optimal balance between visual quality and performance, providing a 15 FPS buffer above the playability threshold.
Similar Performance Alternatives
The nearest rivals for the CPU and GPU in this combo offer interesting comparative data. For the Intel Core Ultra 5 225, its average benchmark score of 36938 places it in a tight cluster with several other processors. The AMD Ryzen 5 5600F is essentially a statistical tie, with a deltaPct of 0. The AMD Ryzen 5 5500X3D is marginally behind at -0.2%, and the AMD Ryzen AI 7 PRO 450 is -0.4% slower. The Intel Core i9-12900T rounds out the group at -0.5%. This indicates that any of these CPUs would deliver nearly identical frame pacing in a GPU-bound scenario like The Technomancer.
On the GPU side, the NVIDIA GeForce RTX 4080 (avg score 54247) is closely matched with its immediate successor, the RTX 4080 SUPER, which posts a deltaPct of 0.1%. The AMD Radeon Pro W5700X is slightly behind at -1.1%, while the AMD Radeon RX 6750 GRE 12 GB and AMD Radeon 8060S are further back at -2.6% and -2.7% respectively. In practical terms, a system using an RTX 4080 SUPER would deliver virtually identical FPS numbers to the ones measured here. A user with an RX 6750 GRE would likely see slightly lower performance, perhaps pushing the 4K High preset closer to the 60 FPS threshold, but the 1440p and 1080p results would remain excellent.
FAQ
Q: Can this PC run The Technomancer at 4K Ultra settings?
A: No, the data shows the Ultra preset at 3840x2160 averages 55 FPS, which is below the 60 FPS playability threshold. You would need to use the High preset, which averages 70 FPS, for a stable 4K experience.
Q: What is the highest quality preset that maintains 60 FPS at 1440p?
A: The Ultra preset at 2560x1440 averages 100 FPS, making it the highest quality setting that comfortably exceeds the 60 FPS threshold.
Q: How does the Core Ultra 5 225 compare to the Ryzen 5 5600F in this context?
A: They are effectively identical in performance. The benchmark data shows a deltaPct of 0 between the two CPUs, meaning either processor would produce nearly the same framerates in this game.
Q: Is the RTX 4080 the primary performance driver in this system?
A: Yes, the steep FPS drops when increasing resolution from 1080p to 1440p and then to 4K (152 to 100 to 55 on Ultra) indicate a GPU-bound workload. The CPU has ample headroom to feed the graphics card.
Q: What are the minimum and maximum FPS recorded at 1080p Medium settings?
A: At 1920x1080 with the Medium preset, the minimum FPS recorded is 194 and the maximum is 263, with an average of 229 FPS.
Q: Is the RTX 4080 significantly faster than the RTX 4080 SUPER?
A: No, the data indicates the RTX 4080 SUPER is just 0.1% faster based on average benchmark scores, making the performance difference negligible in real-world gaming.
How This Combo Ranks
This specific combination of an Intel Core Ultra 5 225 and NVIDIA GeForce RTX 4080 holds a comboRankInGame of 213 out of 3696 tested combinations. This places it in the top 5.8% of all systems tested for The Technomancer. This high percentile is a direct reflection of the GPU's immense power and the CPU's adequate support. The ranking suggests that while there are more powerful combinations (likely featuring higher-tier HEDT or server CPUs paired with RTX 4090-class GPUs), this setup is far more capable than the vast majority of systems. The 4K High result of 70 FPS is a strong indicator of its elite status, as the data implies that most other combos would struggle to match this level of performance at that resolution.
The Verdict
The data unequivocally shows that this PC can run The Technomancer with exceptional proficiency. The verdictByResolution data confirms that 1920x1080 and 2560x1440 support the Ultra preset at 152 FPS and 100 FPS respectively, both far exceeding the 60 FPS threshold. At 3840x2160, the system can run the High preset at 70 FPS, which is the recommended maximum settings for a playable experience. The only setting that fails to clear 60 FPS is 4K Ultra at 55 FPS. Therefore, the answer is a resounding yes: this PC can run the game at maximum settings for all standard resolutions, and even at 4K, it only requires a single-step reduction from Ultra to High to achieve a flawless, high-refresh-rate experience. The combination of the Core Ultra 5 225's solid single-thread performance and the RTX 4080's raw rasterization power makes this a top-tier system for this title, leaving the user with significant performance headroom for future, more demanding games.