Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
169 FPS
Ultra 1080p Measured
86 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
56 FPS

4K (Ultra HD)

Low 4K Measured
61 FPS
Ultra 4K Measured
31 FPS
9ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 79,097
Graphics Card
Required 27,947
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 31 40 47 61
1440p QHD 56 72 85 110
1080p Full HD 86 111 130 169

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 111
1920x1080 Low 169
1920x1080 Medium 130
1920x1080 Ultra 86
2560x1440 High 72
2560x1440 Low 110
2560x1440 Medium 85
2560x1440 Ultra 56
3840x2160 High 40
3840x2160 Low 61
3840x2160 Medium 47
3840x2160 Ultra 31

Performance Analysis: The Technomancer on Your System

The Intel Core i9-14900K paired with the NVIDIA GeForce RTX 4060 lands at rank 1984 out of 3696 tested combos for The Technomancer, placing it in the upper-mid tier of all possible configurations. This ranking reflects a pairing where a top-tier CPU is matched with a mid-range GPU, and the data suggests the graphics card is the primary constraint for this 2016 Action RPG. The combo sits at the 53rd percentile of tested systems, meaning a slight majority of other combinations deliver higher frame rates, yet the measured performance still clears the 60 FPS playable threshold at most settings below 4K.

How This Combo Ranks

The rank of 1984 out of 3696 combos indicates that this system is neither a top performer nor a weak one; it is squarely in the middle of the pack. The CPU itself is exceptional, holding the 95th percentile against all CPUs, while the GPU sits at the 61st percentile against all GPUs. This asymmetry is telling: the processor is overkill for the graphics workload, and the RTX 4060 becomes the limiting factor in demanding scenarios. The data shows that at 1080p and 1440p, the combo performs admirably, but at 4K Ultra, the average frame rate drops to 31 FPS, which is far below the 60 FPS playability threshold. The implication is that the i9-14900K has ample headroom, but the RTX 4060's 8 GB memory and 128-bit bus width bottleneck performance at higher resolutions and presets.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the Intel Core i9-14900KF scores 79371 on average, which is nearly identical to the i9-14900K's 79097, with a delta of -0.3%. This means swapping to the KF variant would yield virtually no difference in The Technomancer, as the only difference is the lack of integrated graphics. The Intel Core Ultra 9 290HX Plus (79574, -0.6%) and AMD EPYC 7413 (80041, -1.2%) are also close, but these are workstation-class chips that would behave similarly in this game due to the GPU bottleneck. The AMD Ryzen AI Max+ 395 scores 77740, which is 1.7% lower, indicating that CPU choice among these top-tier options has a negligible impact on frame rates.

For the GPU, the nearest rivals are surprisingly older or integrated solutions. The AMD Radeon HD 7790 scores 17666, just 0.2% higher than the RTX 4060's 17639 average. This is a historical comparison, as the HD 7790 is a much older card, yet the benchmark average places them close. The AMD Radeon 780M (17588, 0.3%) is an integrated graphics solution in modern APUs, and the AMD Radeon Pro 560 (17551, 0.5%) and Pro 460 (17509, 0.7%) are older professional cards. The data suggests that in synthetic benchmarks, the RTX 4060 is not dramatically ahead of these much older products, but in actual gaming with modern drivers and features, the RTX 4060 would pull ahead due to newer architecture and hardware features. For The Technomancer specifically, any of these GPUs would likely deliver similar frame rates at low settings, but the RTX 4060's advantage grows at higher presets.

CPU and GPU Roles

The measured FPS data reveals a clear pattern: the GPU is the dominant factor at every resolution. At 1080p, the difference between Low (169 FPS) and Ultra (86 FPS) is 83 FPS, a substantial drop that illustrates the GPU's workload scaling. The CPU, with its 24 cores and 32 threads, is never the bottleneck here, as even the most demanding preset at 1080p maintains 86 FPS, which is well above playable. Moving to 1440p, the Low preset yields 110 FPS, while Ultra drops to 56 FPS, showing that the GPU's rendering load increases significantly with resolution. At 4K, the trend becomes critical: Low delivers 61 FPS, but Medium falls to 47 FPS, and Ultra plummets to 31 FPS. The scaling between 1080p and 1440p is roughly linear for the GPU, but the jump to 4K quadruples the pixel count, overwhelming the RTX 4060's capabilities. The CPU's role is minimal; even at 4K Low, the system maintains 61 FPS, which would be GPU-limited in most scenarios. The data implies that upgrading the CPU would not improve frame rates in this game, but upgrading the GPU would yield immediate benefits, especially at 4K.

The Verdict

The verdict by resolution is clear: this PC can run The Technomancer at 60 FPS or above at 1080p and 1440p with the right settings, but 4K is only playable on Low. At 1920x1080, all four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with Ultra averaging 86 FPS. At 2560x1440, High (72 FPS), Medium (85 FPS), and Low (110 FPS) are playable, but Ultra falls to 56 FPS, just below the mark. At 3840x2160, only Low (61 FPS) achieves playability; Medium (47 FPS), High (40 FPS), and Ultra (31 FPS) all fail to reach 60 FPS. Therefore, for a 1080p or 1440p monitor, this combo is fully capable of delivering a smooth experience at high settings. For 4K, the user must sacrifice visual quality to Low, which is a significant compromise. The data indicates that this system is best suited for 1440p gaming, where it can balance visual fidelity and performance.

Measured FPS Breakdown

At 1920x1080, the frame rates are consistently high. Low averages 169 FPS, Medium averages 130 FPS with a minimum of 110 and maximum of 149, High averages 111 FPS, and Ultra averages 86 FPS. The minimum FPS data for Medium shows that even the lowest frame rate stays well above the 60 FPS threshold, indicating a stable experience. At 2560x1440, Low averages 110 FPS, Medium averages 85 FPS with a range of 72 to 97, High averages 72 FPS, and Ultra drops to 56 FPS. The Medium preset at 1440p shows a minimum of 72 FPS, which is still playable, but Ultra's average of 56 FPS means some scenes will dip below 60 FPS. At 3840x2160, the data becomes grim: Low averages 61 FPS, Medium averages 47 FPS with a range of 40 to 53, High averages 40 FPS, and Ultra averages 31 FPS. The minimum FPS for 4K Medium is 40, which is a 33% drop from the average, indicating significant frame pacing issues under load. This breakdown confirms that the RTX 4060 is simply not powerful enough for 4K gaming at medium or higher settings, while it excels at 1080p.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 86 FPS. This is the best possible setting for the resolution, offering the highest visual quality without any performance compromise. At 2560x1440, the best settings are High, averaging 72 FPS. Medium would also be playable at 85 FPS, but High provides better visuals while still clearing the threshold. Ultra at 1440p is not recommended, as its 56 FPS average falls short. At 3840x2160, the only playable preset is Low, averaging 61 FPS. This is a marginal pass, with only 1 FPS of headroom, so users should expect occasional dips below 60 FPS in demanding scenes. The data suggests that 1440p High is the sweet spot for this combo, balancing visual fidelity and performance, while 4K should be avoided unless the user is willing to accept Low settings.

FAQ

Q: Can this PC run The Technomancer at 60 FPS on a 4K monitor?

A: Yes, but only on Low settings, which averages 61 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 47, 40, and 31 FPS respectively.

Q: What is the best preset for 1440p gaming with this combo?

A: High settings at 2560x1440 deliver an average of 72 FPS, which is the most demanding preset that stays above 60 FPS. Ultra drops to 56 FPS, so it is not recommended.

Q: Is the CPU or GPU more important for this game?

A: The data shows the GPU is the limiting factor. At 4K, the frame rate drops from 61 FPS on Low to 31 FPS on Ultra, while the CPU's benchmark percentile (95th) is far higher than the GPU's (61st), indicating the GPU bottlenecks performance.

Q: How does the RTX 4060 compare to its nearest rival, the AMD Radeon HD 7790?

A: In synthetic benchmarks, the HD 7790 scores 17666, which is 0.2% higher than the RTX 4060's 17639. This is a negligible difference, but the RTX 4060 has modern features like ray tracing and DLSS that the older card lacks.

Q: What frame rates can I expect at 1080p Ultra?

A: The average FPS at 1920x1080 Ultra is 86 FPS, which is well above the 60 FPS playable threshold and provides a smooth experience.

Q: Does the i9-14900K's performance differ from the i9-14900KF in this game?

A: No, the two CPUs have nearly identical average benchmark scores (79097 vs 79371, a -0.3% delta), so the gaming performance in The Technomancer would be effectively the same.