The Technomancer

The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 5060 delivers a wide range of performance in The Technomancer, scaling predictably from 1080p down to 4K. At 1920x1080, the combo is overwhelmingly fast, clearing even the Ultra preset with substantial headroom. Moving to 2560x1440, it remains very strong, though the Ultra setting dips just under the 60 FPS playable threshold. At 3840x2160, the pairing becomes more selective, with only the Low preset providing a smooth experience. The measured data shows a clear pattern: this system is built for high-refresh 1080p and solid 1440p gaming, while 4K requires significant settings compromises.

Measured FPS Breakdown

The benchmark results for the Core i7-14700K and RTX 5060 in The Technomancer are recorded across three resolutions and four quality presets. At 1920x1080, the average frame rates are uniformly high. The Low preset produces an average of 178 FPS, Medium drops to 139.3 FPS, High settles at 115.8 FPS, and the most demanding Ultra preset still manages an average of 93.8 FPS. The gap between Low and Ultra is roughly 84 FPS, showing that even the heaviest settings at this resolution leave considerable performance on the table.

Stepping up to 2560x1440, the averages remain well above playable levels for most presets. Low yields 117.2 FPS, Medium achieves 90.2 FPS, and High delivers 76.8 FPS. The Ultra preset, however, falls to 58.9 FPS, which is just below the 60 FPS threshold. The scaling from 1080p to 1440p is consistent: roughly a 35-40% reduction in average FPS across the Low, Medium, and High presets, while Ultra drops by about 37%. This indicates a balanced load increase on the GPU, with the CPU still able to feed the graphics card adequately.

At 3840x2160, the picture changes dramatically. The Low preset averages 63.7 FPS, which is the only playable option at this resolution. Medium falls to 49 FPS, High drops to 42 FPS, and Ultra bottoms out at 30.7 FPS. The difference between Low and Ultra at 4K is a 33 FPS spread, showing that the RTX 5060's 8 GB memory and 128-bit bus are heavily taxed by the higher pixel count. Notably, the data shows no minimum or maximum FPS values for any preset or resolution, so the analysis relies solely on averages.

Best Settings per Resolution

For users targeting a consistent 60 FPS or higher, the verdict data specifies the optimal preset for each resolution. At 1920x1080, the Ultra preset is fully playable, with an average of 93.8 FPS. This is the best visual quality the game offers, and the hardware handles it without breaking a sweat. There is no reason to dial back to High, Medium, or Low at this resolution unless the user seeks maximum frame rates for competitive play, but the data confirms Ultra is the recommended setting.

At 2560x1440, the High preset is the most demanding option that stays above 60 FPS, averaging 76.8 FPS. Medium also clears the threshold at 90.2 FPS, and Low is even faster at 117.2 FPS, but High offers a significantly better visual experience while still providing a 16.8 FPS margin over the playable limit. The Ultra preset, at 58.9 FPS, falls short by just 1.1 FPS, so users with adaptive sync displays might tolerate it, but the data recommends High as the safest choice.

At 3840x2160, only the Low preset meets the 60 FPS target, with an average of 63.7 FPS. Medium and High are below the threshold at 49 FPS and 42 FPS respectively, and Ultra is unplayable at 30.7 FPS. The gap between Low and Medium at 4K is substantial, suggesting that the added shadow quality, texture filtering, and post-processing effects at Medium impose a steep cost on the GPU. For a smooth 4K experience, users must accept the Low preset as the ceiling.

How This Combo Ranks

In the broader database of tested CPU and GPU combinations for The Technomancer, this pairing ranks 1793 out of 3696 combos. That places it in the upper half of all tested systems, specifically just past the 50th percentile mark. The rank reflects the RTX 5060's position in the GPU hierarchy: it sits at the 72nd percentile among all GPUs, while the Core i7-14700K is at the 94th percentile among all CPUs. This imbalance suggests the graphics card is the limiting factor for this game, as the processor has far more headroom relative to its peers.

Looking at the nearest rivals for the GPU, the RTX 5060's average benchmark score is 26331, which is only 0.3% lower than the AMD Radeon 860M and 0.3% lower than the NVIDIA GeForce MX550. It is 0.8% slower than the AMD Radeon RX 5700 XT 50th Anniversary and 1.2% faster than the AMD Radeon RX 6750 XT. These deltas are tiny, meaning the RTX 5060 trades blows with mid-range cards from previous generations. In The Technomancer, this translates to the observed 1080p and 1440p performance, which is solid but not exceptional for the resolution class.

For the CPU, the Core i7-14700K's average benchmark score is 69355, which is 0.1% higher than the AMD EPYC 9115 and 0.2% higher than the AMD Ryzen 9 7950X. It is 0.7% faster than the AMD Ryzen 9 7940HX and 0.9% faster than the AMD Ryzen 7 9700F. These margins are negligible, confirming that the processor is not a bottleneck in this pairing. The combo's rank of 1793 out of 3696 suggests that many systems with weaker CPUs but stronger GPUs outrank it, and vice versa, but the overall position is respectable for a mid-range to upper-mid-range build.

FAQ

Q: Can this PC run The Technomancer at 4K with high settings?

A: No. The data shows the High preset at 3840x2160 averages 42 FPS, which is well below the 60 FPS playable threshold. Only the Low preset reaches 63.7 FPS at this resolution.

Q: What is the best preset for 1440p if I want to stay above 60 FPS?

A: The High preset is the most demanding option that clears the threshold, averaging 76.8 FPS. The Ultra preset falls short at 58.9 FPS.

Q: How much faster is 1080p compared to 1440p on the High preset?

A: At 1920x1080, the High preset averages 115.8 FPS, while at 2560x1440 it averages 76.8 FPS. That is a 39 FPS difference, or roughly a 34% reduction.

Q: Does the CPU or GPU matter more for this game?

A: The GPU is the limiting factor. The RTX 5060 ranks at the 72nd percentile among GPUs, while the Core i7-14700K ranks at the 94th percentile among CPUs. The frame rate scaling from 1080p to 4K shows a steep drop, which is characteristic of a GPU-bound workload.

Q: Is the Ultra preset playable at 1080p?

A: Yes. The Ultra preset at 1920x1080 averages 93.8 FPS, which is well above the 60 FPS threshold. It is the recommended setting for this resolution.

Q: What is the average FPS difference between Low and Ultra at 4K?

A: The Low preset averages 63.7 FPS, while the Ultra preset averages 30.7 FPS. That is a 33 FPS difference, indicating the Ultra preset is nearly half the speed of Low.

CPU and GPU Roles

The measured FPS data across resolutions and presets clearly indicates that the NVIDIA GeForce RTX 5060 is the dominant component in this pairing for The Technomancer. The CPU, the Intel Core i7-14700K, has a benchmark percentile of 94, meaning it outperforms 94% of all CPUs in the database. Its nearest rivals, such as the AMD Ryzen 9 7950X, are within 0.2% of its average score, showing that it is a top-tier processor. However, the game's performance scaling does not reflect such CPU dominance.

When moving from 1920x1080 to 2560x1440 on the High preset, the average FPS drops from 115.8 to 76.8, a reduction of 39 FPS. This is a 33.7% decrease, which is proportional to the increase in pixel count from about 2.07 million to 3.69 million pixels. The GPU must process roughly 78% more pixels, and the frame rate drop aligns with that load. The CPU, with its 20 cores and 28 threads, is not stressed by this game's single-threaded or lightly threaded nature, as evidenced by its high single-core benchmark scores (2160 in Cinebench R23 single-core).

At 3840x2160, the pixel count jumps to 8.29 million, which is 2.25 times the 1440p count. The High preset averages 42 FPS, which is a 45% drop from the 1440p High average of 76.8 FPS. This non-linear drop suggests that the RTX 5060's memory bandwidth of 448.0 GB/s and 8 GB GDDR7 VRAM are hitting limits. The Low preset at 4K averages 63.7 FPS, while the Medium preset drops to 49 FPS, a 23% reduction. This indicates that the medium settings add substantial texture and shader complexity that the GPU cannot handle at this resolution. The CPU's role is secondary: it provides a stable base, but the frame rates are dictated by the graphics card's ability to fill pixels and manage memory.

The data shows no minimum or maximum FPS values, so there is no evidence of CPU-induced stuttering or frame time spikes. The consistent averages across presets suggest that the CPU is never the bottleneck. For users overclocking, the Core i7-14700K has an unlocked multiplier and a boost clock of 5.60 GHz, but any performance gains in this game would be marginal since the GPU is already saturated at higher resolutions.

The Verdict

This PC configuration can run The Technomancer, but the experience depends heavily on the chosen resolution. At 1920x1080, the system clears the 60 FPS threshold with ease on all four presets. The Ultra preset averages 93.8 FPS, making it the recommended choice for a fully maxed-out visual experience. This is the sweet spot for this hardware, offering both high fidelity and smooth gameplay.

At 2560x1440, the system remains very capable, with the High preset averaging 76.8 FPS. This is the best playable setting, providing a good balance of visual quality and performance. The Ultra preset falls just short at 58.9 FPS, so users who prioritize max settings would need to accept a slightly lower frame rate or use a display with adaptive sync. The Low and Medium presets are also playable, but they sacrifice too much visual detail for the extra FPS.

At 3840x2160, the system is limited to the Low preset, which averages 63.7 FPS. This is playable but not ideal, as the Low preset strips away most of the game's visual effects. The Medium preset drops to 49 FPS, High to 42 FPS, and Ultra to 30.7 FPS, none of which meet the playable threshold. For 4K gaming, this hardware is not recommended unless the user is willing to accept a significant downgrade in visual quality. In summary, the Core i7-14700K and RTX 5060 combination is best suited for 1080p Ultra and 1440p High gaming, with 4K being a stretch that only works on the lowest settings.