Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
296 FPS
Ultra 1080p Measured
152 FPS

1440p (2K / QHD)

Low 1440p Measured
194 FPS
Ultra 1440p Measured
99 FPS

4K (Ultra HD)

Low 4K Measured
106 FPS
Ultra 4K Measured
54 FPS
5.2ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 69,355
Graphics Card
Required 27,947
Your GPU 54,209

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 70 82 106
1440p QHD 99 127 149 194
1080p Full HD 152 194 227 296

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 194
1920x1080 Low 296
1920x1080 Medium 227
1920x1080 Ultra 152
2560x1440 High 127
2560x1440 Low 194
2560x1440 Medium 149
2560x1440 Ultra 99
3840x2160 High 70
3840x2160 Low 106
3840x2160 Medium 82
3840x2160 Ultra 54

Performance Analysis: The Technomancer on Your System

# How This Combo Ranks

The Intel Core i7-14700K paired with the NVIDIA GeForce RTX 4080 SUPER ranks 250th out of 3,696 tested combinations for The Technomancer. This places the combo in the top 6.8% of all tested configurations, indicating a very high-performing setup for this title. The CPU itself sits at the 94th percentile against all tested CPUs, while the GPU ranks at the 86th percentile against all tested GPUs, confirming that both components are well above average for their respective categories. The combination's high ranking is consistent with the measured frame rates, which exceed 60 FPS at every resolution tested when using appropriate settings.

The combo's position in the overall rankings suggests that while it is not the absolute fastest configuration available, it is firmly in the upper echelon of systems capable of running The Technomancer. The game, released in 2016, does not appear to be exceptionally demanding by modern standards, which allows this hardware to deliver high frame rates even at 4K resolution. The rank of 250 out of 3,696 also indicates that a significant number of other tested combos achieve similar or better performance, but the vast majority of systems rank below this configuration.

# Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that maintains at least 60 FPS on average is High, which delivers an average of 70 FPS. The Medium preset runs at 82 FPS average, but High is the better visual quality option while still clearing the 60 FPS threshold. Low runs at 106 FPS average, but High is recommended for the best balance of visual fidelity and performance. Ultra at 4K drops to 54 FPS average, which falls below the 60 FPS playable threshold, so it is not recommended at this resolution.

At 2560x1440 (1440p), all four presets are playable. The best settings are Ultra, which delivers an average of 99 FPS. This is well above the 60 FPS threshold, allowing for maximum visual quality without sacrificing smoothness. High runs at 127 FPS, Medium at 149 FPS, and Low at 194 FPS, but Ultra provides the best experience with no need to compromise.

At 1920x1080 (1080p), Ultra is also the best settings, delivering an average of 152 FPS. All presets are playable here, with High at 194 FPS, Medium at 227 FPS, and Low at 296 FPS. The system has ample headroom at 1080p, making it suitable for high-refresh-rate displays even at maximum settings.

# CPU and GPU Roles

The data shows a clear scaling pattern across resolutions and presets that reveals the GPU as the dominant constraint at higher resolutions. At 1080p, the difference between Low and Ultra settings is 144 FPS (296 to 152), indicating that the GPU is handling a significant workload increase as settings rise. At 1440p, the same Low-to-Ultra gap is 95 FPS (194 to 99), and at 4K it narrows to 52 FPS (106 to 54). This progressive narrowing suggests that as resolution increases, the GPU becomes more saturated, and the relative impact of settings diminishes.

The CPU's role is more apparent at lower resolutions where frame rates are extremely high. At 1080p Low, the system achieves 296 FPS, which is well beyond what most displays can show, but it demonstrates that the Core i7-14700K with its 20 cores and 28 threads is not a bottleneck at these frame rates. The CPU's multicore score of 33,440.5 in Cinebench R23 and single-core score of 2,160 in the same test indicate ample processing headroom for this 2016 title.

At 4K, the frame rates drop proportionally more when moving from Medium (82 FPS) to High (70 FPS) and then to Ultra (54 FPS), showing that the GPU's rendering load is the primary factor. The RTX 4080 SUPER with 10,240 shading units and 16 GB of GDDR6X memory is likely the limiting factor at 4K Ultra, as the CPU has more than enough performance to feed the GPU. The scaling from 4K Medium to 4K High (82 to 70 FPS) represents a 14.6% drop, while the 4K High to 4K Ultra drop (70 to 54 FPS) is 22.9%, indicating diminishing returns at the highest settings.

# Similar Performance Alternatives

For the CPU, the nearest rivals in benchmark performance are all within 1% of the Core i7-14700K's average score of 69,355. The AMD EPYC 9115 scores 69,288, which is 0.1% higher. The AMD Ryzen 9 7950X scores 69,515, which is 0.2% higher. The AMD Ryzen 9 7940HX scores 69,875, which is 0.7% higher, and the AMD Ryzen 7 9700F scores 69,996, which is 0.9% higher. Any of these processors would deliver nearly identical performance in The Technomancer, as the game's CPU demands are modest relative to these high-end parts.

For the GPU, the nearest rivals are similarly close. The NVIDIA GeForce RTX 4080 scores 54,247, which is 0.1% lower than the RTX 4080 SUPER's 54,209 average. The AMD Radeon Pro W5700X scores 54,828, which is 1.1% higher, though this is a professional card. The AMD Radeon RX 6750 GRE 12 GB scores 55,698, which is 2.7% higher, and the AMD Radeon 8060S scores 55,757, which is 2.8% higher. These deltas are all within 3%, meaning that swapping to any of these GPUs would result in nearly identical frame rates in The Technomancer, with differences too small to notice in practice.

# Measured FPS Breakdown

At 1920x1080, the measured average frame rates are as follows: Low delivers 296 FPS, Medium delivers 227 FPS with a minimum of 193 and maximum of 262, High delivers 194 FPS, and Ultra delivers 152 FPS. The Medium preset is the only one with reported minimum and maximum values, showing a 69 FPS range between the lowest and highest frames. The gap between Low and Ultra at 1080p is 144 FPS, representing a 48.6% reduction in performance when going from the lowest to highest settings.

At 2560x1440, Low delivers 194 FPS, Medium delivers 149 FPS with a minimum of 126 and maximum of 171, High delivers 127 FPS, and Ultra delivers 99 FPS. The Medium preset again shows a 45 FPS range between minimum and maximum. The Low-to-Ultra gap is 95 FPS, which is a 49% reduction from Low. Notably, the 1440p Low frame rate of 194 FPS exactly matches the 1080p High frame rate, indicating that resolution scaling is roughly equivalent to one full settings tier.

At 3840x2160, Low delivers 106 FPS, Medium delivers 82 FPS with a minimum of 69 and maximum of 94, High delivers 70 FPS, and Ultra delivers 54 FPS. The Medium preset shows a 25 FPS range between minimum and maximum. The Low-to-Ultra gap is 52 FPS, representing a 49.1% reduction. The 4K Ultra average of 54 FPS is the only measured result that falls below the 60 FPS playable threshold, confirming that Ultra settings at 4K are not suitable for smooth gameplay.

The scaling between resolutions shows consistent patterns. Moving from 1080p to 1440p at the same preset reduces performance by approximately 34-35% (e.g., High drops from 194 to 127 FPS, a 34.5% reduction). Moving from 1440p to 4K at the same preset reduces performance by approximately 44-45% (e.g., High drops from 127 to 70 FPS, a 44.9% reduction). These numbers reflect the increasing pixel count and the GPU's rendering workload.

# The Verdict

This PC can run The Technomancer at all tested resolutions, but not at all settings. At 1920x1080, the system clears 60 FPS at every preset, with Ultra delivering 152 FPS average. At 2560x1440, Ultra also clears the threshold at 99 FPS average. At 3840x2160, the system can run Low (106 FPS), Medium (82 FPS), and High (70 FPS) above 60 FPS, but Ultra falls short at 54 FPS.

The verdict by resolution is clear: 1080p and 1440p allow maximum settings with comfortable margins above the 60 FPS playable threshold. At 4K, High settings are the best option, providing 70 FPS average, which is 16.7% above the threshold. The 4K Ultra setting is the only configuration that fails to meet the playable standard, making it the sole exception in an otherwise fully playable scenario.

For users with 4K displays, the recommendation is to use High settings for the best visual quality while maintaining smooth frame rates. For 1440p and 1080p displays, Ultra settings are fully playable with substantial headroom, making this combo an excellent choice for The Technomancer at those resolutions. The system's performance is consistent with its high ranking of 250 out of 3,696 combinations.

# FAQ

Q: Can this PC run The Technomancer at 4K Ultra settings?

A: No. At 3840x2160 with Ultra settings, the average frame rate is 54 FPS, which falls below the 60 FPS playable threshold. High settings at 4K deliver 70 FPS average and are recommended instead.

Q: What is the best settings preset for 1440p gaming?

A: Ultra settings at 2560x1440 deliver an average of 99 FPS, which is well above the 60 FPS threshold. All four presets (Low, Medium, High, Ultra) are playable at 1440p, but Ultra provides the best visual quality.

Q: How does the RTX 4080 SUPER compare to the standard RTX 4080 in this game?

A: The RTX 4080 SUPER has an average benchmark score of 54,209, while the RTX 4080 scores 54,247, which is 0.1% higher. In practical terms, the performance difference in The Technomancer would be negligible.

Q: Is the CPU or GPU more important for this game at 1080p?

A: At 1920x1080, the system achieves 296 FPS on Low settings, indicating that the CPU is not a bottleneck. The GPU becomes more important as settings increase, with Ultra dropping to 152 FPS. The Core i7-14700K has sufficient headroom at this resolution.

Q: What frame rate can I expect at 4K Medium settings?

A: At 3840x2160 with Medium settings, the average frame rate is 82 FPS, with a minimum of 69 FPS and maximum of 94 FPS. This is comfortably above the 60 FPS playable threshold.

Q: How does this combo rank among all tested systems for The Technomancer?

A: This combo ranks 250th out of 3,696 tested combinations, placing it in the top 6.8% of all configurations. The CPU is at the 94th percentile and the GPU at the 86th percentile relative to all tested components.