Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 35 | 41 | 54 |
| 1440p QHD | 50 | 64 | 75 | 98 |
| 1080p Full HD | 77 | 98 | 115 | 150 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The Technomancer is an Action RPG from 2016 that stresses GPUs more than modern titles, and the data for the Intel Core i7-14700F + NVIDIA GeForce RTX 5050 combo shows a clear split: 1080p and 1440p are comfortable, while 4K demands compromises. The RTX 5050, with 8 GB of GDDR6 memory on a 128-bit bus delivering 320.0 GB/s, is the limiting factor at higher resolutions, but the Core i7-14700F’s 20 cores and 28 threads ensure the CPU side never becomes a bottleneck in this title. Benchmark results indicate that this pairing is a solid mid-range choice for 1080p Ultra and 1440p High, but not a 4K powerhouse.
Measured FPS Breakdown
At 1920x1080, the combo delivers its strongest performance. Low settings produce an average of 150 FPS, which is the highest measured average across all resolutions and presets. Medium settings drop to 115 FPS average, with a minimum of 98 FPS and a maximum of 132 FPS. High settings yield 98 FPS average, and Ultra settings still hold at 77 FPS average. All four presets at 1080p clear the 60 FPS playable threshold, with Ultra being the most demanding preset that remains viable.
Moving to 2560x1440, the performance scales down predictably. Low settings average 98 FPS, matching the 1080p High result. Medium settings average 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. High settings average 64 FPS, which is exactly at the playable threshold. Ultra settings fall to 50 FPS average, which is below the 60 FPS threshold and not considered playable. The min/max data for Medium at 1440p shows a tight range, suggesting consistent frame pacing.
At 3840x2160, the RTX 5050 struggles. Low settings average 54 FPS, just under the 60 FPS threshold. Medium settings average 41 FPS, with a minimum of 35 FPS and a maximum of 48 FPS. High settings average 35 FPS, and Ultra settings drop to 28 FPS. No preset at 4K meets the 60 FPS playable threshold, and the gap between Low and Ultra is 26 FPS, showing that the GPU’s 13.17 TFLOPS of FP32 compute is insufficient for this resolution in The Technomancer.
The scaling from 1080p to 1440p at High settings is a drop from 98 FPS to 64 FPS, a 34 FPS reduction. From 1440p to 4K at High settings, the drop is from 64 FPS to 35 FPS, another 29 FPS reduction. This linear degradation confirms that the GPU is the primary constraint as resolution increases.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 77 FPS. This is the highest quality setting available and it comfortably clears the threshold, leaving headroom for dips. The data shows that Ultra at 1080p is the optimal balance of visual quality and performance for this combo.
At 2560x1440, the best playable setting is High, averaging 64 FPS. This is exactly at the 60 FPS threshold, so there is minimal headroom, but the average indicates consistent playability. Medium is also playable at 75 FPS, but High provides better visual fidelity with a still-acceptable frame rate. Ultra at 1440p is not recommended, as it averages 50 FPS.
At 3840x2160, there is no playable setting. The closest is Low at 54 FPS, which is below the 60 FPS threshold. Medium (41 FPS), High (35 FPS), and Ultra (28 FPS) are all significantly below playable. Users targeting 4K would need to reduce resolution or accept sub-60 FPS performance.
How This Combo Ranks
The combo ranks 2269 out of 3696 tested combinations in The Technomancer, placing it in the upper-middle tier of all tested systems. This percentile position reflects the GPU’s moderate standing — the RTX 5050 sits at the 66th percentile among all GPUs — rather than the CPU, which is at the 91st percentile among all CPUs. The rank of 2269 suggests that while this system handles 1080p and 1440p well, there are many faster combinations tested, particularly those with higher-end GPUs.
The CPU’s average benchmark score of 53620 is strong, but the GPU’s average benchmark score of 21035 is modest. Since The Technomancer is GPU-bound at higher resolutions, the combo’s rank is pulled down by the GPU’s mid-pack performance. The gap between the GPU’s 66th percentile and the CPU’s 91st percentile indicates a balanced pairing for gaming, but the rank shows that this is not a top-tier setup for this specific title.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the Intel Xeon 6505P has an average score of 53701, which is 0.2% higher than the Core i7-14700F. The Intel Xeon Phi 7290 scores 53469, 0.3% lower, and the AMD Ryzen 9 7900X scores 53288, 0.6% lower. The AMD EPYC 7313P scores 53206, 0.8% lower. All four rivals are within 1% of the Core i7-14700F’s performance, meaning any of these CPUs would deliver nearly identical frame rates in The Technomancer when paired with the same RTX 5050.
On the GPU side, the nearest rivals are closer in absolute terms but vary in deltaPct. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher than the RTX 5050. The AMD Radeon HD 8970M scores 21237, 1.0% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. These rivals bracket the RTX 5050’s performance, so swapping to any of them would change FPS by roughly 1-2% in this game. The RX 5600 XT is the closest competitor that would perform slightly worse, while the RTX A4000 Mobile is the closest that would perform slightly better.
CPU and GPU Roles
At 1920x1080, the CPU matters more than at higher resolutions because the GPU has enough headroom. The Core i7-14700F’s 20 cores and 28 threads, with a boost clock of 5.40 GHz, ensure that frame rates scale cleanly from Low (150 FPS) to Ultra (77 FPS). The 77 FPS at Ultra suggests the GPU is still the main constraint, but the CPU’s single-thread performance (PassMark single-thread score of 4257) prevents any bottleneck in this older title.
At 2560x1440, the GPU begins to dominate. The drop from High (64 FPS) to Ultra (50 FPS) is a 14 FPS reduction, while the CPU remains constant. The RTX 5050’s 8 GB memory capacity and 320.0 GB/s bandwidth are sufficient at this resolution, but the 13.17 TFLOPS compute is the limiting factor. The CPU’s role diminishes because the GPU is working harder to fill more pixels.
At 3840x2160, the GPU is almost entirely the bottleneck. The spread from Low (54 FPS) to Ultra (28 FPS) is 26 FPS, and even Low fails to hit 60 FPS. The CPU’s performance is irrelevant at this resolution because the RTX 5050 cannot keep up with the pixel count. The 4K results show that no amount of CPU power would fix the GPU’s shortfall — the data indicates a hard GPU ceiling.
The scaling between presets at each resolution confirms this: at 1080p, the gap between Low and Ultra is 73 FPS; at 1440p, it is 48 FPS; at 4K, it is 26 FPS. As resolution increases, the GPU saturates and the relative impact of preset changes shrinks, proving the GPU is the dominant component in this game.
FAQ
Q: Can this combo run The Technomancer at 1080p with maximum settings?
A: Yes. At 1920x1080 with Ultra settings, the combo averages 77 FPS, which is above the 60 FPS playable threshold. It is the most demanding preset that remains playable at this resolution.
Q: What is the best playable setting at 1440p?
A: High settings at 2560x1440 average 64 FPS, which is the most demanding preset that stays at or above 60 FPS. Medium averages 75 FPS and is also playable, but High offers better visuals with acceptable performance.
Q: Is 4K playable with this hardware?
A: No. At 3840x2160, the best average is 54 FPS on Low settings, which is below the 60 FPS threshold. Medium (41 FPS), High (35 FPS), and Ultra (28 FPS) are all significantly worse.
Q: How does this combo rank compared to other tested systems?
A: It ranks 2269 out of 3696 tested combinations in The Technomancer. The GPU is at the 66th percentile among all GPUs, while the CPU is at the 91st percentile, indicating the GPU is the limiting factor.
Q: Which component is more important for this game?
A: The GPU is the primary constraint, especially at higher resolutions. At 1080p, the CPU has more influence, but at 1440p and 4K, the RTX 5050’s compute limits dominate. The 4K results show no preset reaches 60 FPS, regardless of CPU strength.
Q: What GPU alternatives would perform similarly?
A: The AMD Radeon RX 5600 XT is 1.6% slower than the RTX 5050, while the AMD Radeon RX Vega M GL (0.6% faster), AMD Radeon HD 8970M (1.0% faster), and NVIDIA RTX A4000 Mobile (1.6% faster) are all within 2% of its performance. Any of these would produce nearly identical frame rates in this game.