The Technomancer

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 5050 delivers a playable experience in The Technomancer at 1080p and 1440p, but the data shows 4K Ultra settings are off the table. The benchmark results indicate this combo is best suited for 1080p Ultra, where it achieves a 77 FPS average, while 1440p High remains a robust option at 64 FPS. At 4K, the GPU becomes the limiting factor, with even Low settings only producing a 54 FPS average, falling short of the 60 FPS playable threshold.

Best Settings per Resolution

The measured frame rates from the FACT PACK reveal a clear hierarchy of playable settings across the three tested resolutions. The playable threshold is defined as 60 FPS or higher, and the verdict data specifies the most demanding preset that stays at or above this mark for each resolution.

1920x1080: The best settings are Ultra, delivering an average of 77 FPS. This is the highest preset tested at this resolution that clears the 60 FPS line. The data shows that even the maximum quality setting is comfortably playable, with a 24 FPS margin above the threshold. Lower presets also exceed the threshold easily: High averages 98 FPS, Medium averages 115 FPS, and Low averages 150 FPS. However, Ultra represents the optimal balance of visual fidelity and performance.

2560x1440: The best settings are High, with an average of 64 FPS. This is a narrow margin of just 4 FPS above the playable threshold. The verdict lists High, Low, and Medium as playable settings at this resolution. Medium averages 75 FPS, and Low averages 98 FPS, both providing more headroom. Ultra, however, drops to a 50 FPS average and is not considered playable. For the highest visual quality that remains smooth, High is the definitive choice.

3840x2160: The verdict data lists no playable settings at this resolution. The most demanding preset that could theoretically hit 60 FPS does not exist, as all four tested presets fall below the threshold. Low settings produce a 54 FPS average, Medium averages 41 FPS, High averages 35 FPS, and Ultra averages 28 FPS. None of these reach the 60 FPS target, meaning 4K gaming with this combo requires accepting sub-60 performance or lowering the resolution.

FAQ

Q: Can this PC run The Technomancer at 4K resolution?

A: No. The measured FPS data shows that at 3840x2160, the best average frame rate is 54 FPS on Low settings. The verdict by resolution confirms that no playable settings exist at 4K, as all presets fail to reach the 60 FPS threshold.

Q: What is the maximum quality setting for 1080p gaming?

A: Ultra settings are playable at 1920x1080, with an average FPS of 77. This is the most demanding preset that stays above the 60 FPS playable threshold at this resolution.

Q: How much performance headroom does the 1440p High preset have?

A: The 1440p High preset averages 64 FPS, which is only 4 FPS above the 60 FPS playable threshold. This is a slim margin, and the benchmark data shows that Ultra at this resolution drops to 50 FPS, indicating that High is the ceiling for consistent smooth performance.

Q: Is the CPU or GPU the bottleneck in this system?

A: The data points to the GPU as the primary constraint at higher resolutions. The RTX 5050 has a percentile rank of 66 among all GPUs, while the i7-13700K ranks in the 89th percentile among all CPUs. At 4K, even Low settings fail to hit 60 FPS, which strongly suggests the graphics card is unable to keep pace with the processor's capability.

Q: What frame rate can I expect on Medium settings at 1440p?

A: The measured FPS for 2560x1440 Medium is an average of 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. This preset is well above the playable threshold and offers more performance headroom than the High preset.

Q: How does the RTX 5050 compare to its nearest rivals in this game?

A: The GPU's average benchmark score is 21035. The nearest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. These deltas are small, indicating that the RTX 5050 performs within a tight band of these alternatives.

Measured FPS Breakdown

The measured FPS data provides a detailed look at performance across all resolutions and settings. The numbers are exact averages, with minimum and maximum values where recorded.

3840x2160 (4K): The average frame rates are low across all presets. Ultra averages 28 FPS. High averages 35 FPS. Medium averages 41 FPS, with a minimum of 35 FPS and a maximum of 48 FPS. Low averages 54 FPS. None of these averages reach the 60 FPS playable threshold, and the gap between Low and the threshold is 6 FPS.

2560x1440 (1440p): Performance improves significantly. Ultra averages 50 FPS. High averages 64 FPS. Medium averages 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. Low averages 98 FPS. The jump from Ultra to High is 14 FPS, and from High to Medium is another 11 FPS, showing a clear scaling curve.

1920x1080 (1080p): This is the strongest resolution for this combo. Ultra averages 77 FPS. High averages 98 FPS. Medium averages 115 FPS, with a minimum of 98 FPS and a maximum of 132 FPS. Low averages 150 FPS. The minimum FPS recorded for Medium at 1080p is 98, which is still well above the playable threshold, indicating consistent performance.

The pattern is consistent: each step down in resolution provides a substantial boost in frame rate. The 1080p Medium minimum of 98 FPS is higher than the 1440p High average of 64 FPS, which is higher than the 4K Low average of 54 FPS.

Similar Performance Alternatives

The nearest rivals in the FACT PACK give a sense of what other hardware would behave similarly in this system.

CPU Alternatives: The Intel Core i7-13700K has an average benchmark score of 46881. The AMD Ryzen 9 5900 scores 46971, which is 0.2% higher — essentially a performance match. The AMD Ryzen AI 9 HX PRO 375 scores 47022, 0.3% higher. The AMD Ryzen 9 7845HX scores 46654, 0.5% lower. The Intel Xeon w3-2535 scores 46653, 0.5% lower. All four rivals are within a 1% delta of the i7-13700K, meaning any of these CPUs would produce nearly identical frame rates in CPU-bound scenarios. For The Technomancer, which is likely more GPU-dependent, the differences would be negligible.

GPU Alternatives: The NVIDIA GeForce RTX 5050 has an average benchmark score of 21035. The AMD Radeon RX Vega M GL scores 21153, 0.6% higher. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. These deltas are all under 2%, indicating that swapping the RTX 5050 for any of these alternatives would yield very similar performance. A user with any of these GPUs would expect comparable FPS numbers at the same settings and resolutions.

The combination of the i7-13700K with any of its rival CPUs, paired with the RTX 5050 or any of its rival GPUs, would produce a system that performs within a narrow band of the tested configuration. The benchmark results for these parts are so close that the gameplay experience would be effectively identical.

The Verdict

The data is clear on whether this PC can run The Technomancer: it depends entirely on the target resolution. The verdict by resolution shows that at 1920x1080, all four presets — Low, Medium, High, and Ultra — are playable, with Ultra averaging 77 FPS. At 2560x1440, three presets are playable: High (64 FPS), Medium (75 FPS), and Low (98 FPS). At 3840x2160, zero presets are playable, with the highest average being 54 FPS on Low settings.

For a 1080p monitor, this system is fully capable of running the game at maximum quality with a comfortable frame rate. The 77 FPS average on Ultra provides a smooth experience, and even the minimum FPS for Medium at 1080p is 98, which is far above the threshold. The 1440p High preset is viable but leaves little headroom, as the 64 FPS average is only 4 FPS above the 60 FPS line. Players who prefer a higher buffer should use Medium at 1440p, which delivers 75 FPS.

At 4K, the system is not recommended for this game. The 54 FPS average on Low settings is playable in the sense that it is above 30 FPS, but it does not meet the 60 FPS threshold defined in the data. The verdict explicitly states that no playable settings exist at 3840x2160. Users with a 4K display would need to lower the resolution or upgrade the GPU to achieve the target frame rate.

How This Combo Ranks

The Intel Core i7-13700K + NVIDIA GeForce RTX 5050 combination ranks 2269 out of 3696 tested combos for The Technomancer. This places it in the top 61% of all configurations. The rank is driven primarily by the GPU, which is in the 66th percentile of all GPUs, while the CPU is in the 89th percentile. The combination of a high-end CPU and a mid-range GPU results in a system that is competent at mainstream resolutions but not exceptional.

The ranking reflects the system's position relative to all other tested hardware. Being in the 2269th spot out of 3696 means that roughly 1427 combos performed better, while 2469 performed worse. The data indicates that this is a solid mid-tier configuration, capable of handling the game smoothly at 1080p and 1440p, but it will not compete with high-end systems that pair the i7-13700K with a more powerful GPU. For its target audience — gamers at 1080p or 1440p — the rank is adequate, and the measured FPS confirms a playable experience at those resolutions.