Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
296 FPS
Ultra 1080p Measured
154 FPS

1440p (2K / QHD)

Low 1440p Measured
192 FPS
Ultra 1440p Measured
101 FPS

4K (Ultra HD)

Low 4K Measured
107 FPS
Ultra 4K Measured
54 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 46,881
Graphics Card
Required 27,947
Your GPU 54,209

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 69 83 107
1440p QHD 101 125 147 192
1080p Full HD 154 197 227 296

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 197
1920x1080 Low 296
1920x1080 Medium 227
1920x1080 Ultra 154
2560x1440 High 125
2560x1440 Low 192
2560x1440 Medium 147
2560x1440 Ultra 101
3840x2160 High 69
3840x2160 Low 107
3840x2160 Medium 83
3840x2160 Ultra 54

Performance Analysis: The Technomancer on Your System

The Technomancer is a 2016 Action RPG that, on paper, should be trivial for a modern high-end system. The measured data for the Intel Core i7-13700K and NVIDIA GeForce RTX 4080 SUPER combination confirms this, but the scaling between resolutions and presets reveals a nuanced picture of where the bottlenecks lie. At 4K Ultra, the system dips below the 60 FPS playable threshold, which is the only scenario where this hardware struggles. Everywhere else, the frame rates are exceptionally high, often exceeding the refresh rates of standard monitors.

Measured FPS Breakdown

The benchmark results provide a clear matrix of average frame rates across three resolutions and four quality presets. At 1920x1080, the system is massively overqualified. The Low preset produces an average of 295.7 FPS, which is nearly double the High preset’s 196.9 FPS. Medium sits between them at 226.5 FPS, while Ultra drops to 153.6 FPS. Even the lowest figure at 1080p is more than double the 60 FPS playable threshold, indicating that the CPU and GPU are nowhere near their limits at this resolution.

Moving to 2560x1440, the frame rates remain extremely high but show a predictable decline as settings increase. The Low preset averages 191.6 FPS, Medium drops to 146.8 FPS, and High records 124.6 FPS. The Ultra preset still manages a robust 101.3 FPS. The gap between Low and Ultra at 1440p is 90.3 FPS, which highlights how much headroom the hardware has even when pushing more pixels.

At 3840x2160, the performance curve steepens. The Low preset averages 106.9 FPS, which is still well above the 60 FPS target. Medium follows at 82.8 FPS, and High at 68.7 FPS. The Ultra preset is the only configuration that fails to maintain 60 FPS, averaging just 54.1 FPS. The scaling from 1440p to 4K at Ultra settings shows a drop of 47.2 FPS, demonstrating that 4K Ultra is the first real challenge for this combo.

The data shows a consistent pattern: at 1080p and 1440p, the system is GPU-bound at higher presets, but the CPU’s strong single-thread performance keeps minimums high. At 4K, the GPU’s raw throughput becomes the limiting factor, especially at Ultra where the average FPS falls below the threshold.

CPU and GPU Roles

The division of labor between the Intel Core i7-13700K and the RTX 4080 SUPER is evident from the scaling between presets and resolutions. At 1080p, the performance delta between Low and Ultra is 142.1 FPS, which indicates that the GPU is doing most of the work but is never saturated. The CPU’s 16 cores and 24 threads, with a boost clock of 5.40 GHz, are more than sufficient to feed the GPU at these frame rates.

As resolution increases to 1440p, the gap between Low and Ultra narrows slightly to 90.3 FPS. This shows the GPU starting to become more of a bottleneck, as the higher pixel count demands more from the RTX 4080 SUPER’s 16 GB of GDDR6X memory and 736.3 GB/s bandwidth. The CPU’s role diminishes, but it still provides enough headroom to prevent any frame drops.

At 4K, the dynamic shifts decisively. The difference between Low and Ultra is 52.8 FPS, and the Ultra preset’s average of 54.1 FPS is barely below the playable threshold. This is a clear sign that the GPU is now the primary constraint. The RTX 4080 SUPER’s 52.22 TFLOPS of FP32 performance is being fully utilized, while the CPU is likely idle waiting for the GPU to finish rendering each frame.

The verdict from the data: at 1080p and 1440p, the CPU matters more for maintaining high average FPS, but the GPU is still the dominant factor. At 4K, the GPU is unequivocally the limiting component, and the CPU’s performance is largely irrelevant beyond ensuring a stable frame time.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU and GPU provides context for how other hardware would behave in this game. The Intel Core i7-13700K has an average benchmark score of 46881, with its closest competitor being the AMD Ryzen 9 5900 at 46971, a delta of -0.2%. This means the Ryzen 9 5900 would perform nearly identically in CPU-bound scenarios, such as 1080p Low preset, where the i7-13700K averages 295.7 FPS.

The AMD Ryzen AI 9 HX PRO 375 scores 47022, a delta of -0.3%, making it another near-identical match. The AMD Ryzen 9 7845HX and Intel Xeon w3-2535 both score 46654 and 46653 respectively, with deltas of 0.5% each. These CPUs would produce virtually the same frame rates in The Technomancer, meaning any of them paired with an RTX 4080 SUPER would yield results within a few FPS of the measured data.

For the GPU, the NVIDIA GeForce RTX 4080 SUPER has an average score of 54209. The closest rival is the NVIDIA GeForce RTX 4080 at 54247, a delta of -0.1%. This is essentially a tie, so an RTX 4080 would deliver nearly identical FPS across all resolutions and settings. The AMD Radeon Pro W5700X scores 54828, a delta of -1.1%, which is slightly higher but still within a small margin.

The AMD Radeon RX 6750 GRE 12 GB scores 55698, a delta of -2.7%, indicating it would be slightly faster on average, though the difference is unlikely to change the playability verdict at any resolution. The AMD Radeon 8060S scores 55757, a delta of -2.8%, similar in performance.

In practice, swapping the CPU for any of these rivals would not change the 4K Ultra result of 54.1 FPS, as the GPU remains the bottleneck. Conversely, swapping the GPU for an RTX 4080 would yield nearly identical numbers, confirming that this combo is well-balanced for this title.

The Verdict

The data is unambiguous: this PC can run The Technomancer at 60 FPS or higher in almost all configurations. At 1920x1080, all four presets are playable, with Ultra averaging 153.6 FPS. The 2560x1440 resolution is equally playable across the board, with Ultra averaging 101.3 FPS. Even at 3840x2160, the High preset averages 68.7 FPS, which clears the 60 FPS threshold.

The only failure point is 3840x2160 at Ultra settings, where the average FPS drops to 54.1. This is 5.9 FPS below the playable threshold of 60 FPS. The verdict by resolution confirms this: at 4K, the playable settings are High, Low, and Medium, with High being the best at 68.7 FPS.

For users with a 4K monitor, the system is still very capable, but Ultra settings are off the table. Dropping to High provides a smooth experience with a 68.7 FPS average. At 1440p and 1080p, there are no compromises needed; Ultra settings are playable with significant headroom.

Best Settings per Resolution

The optimal settings for each resolution are determined by the highest preset that maintains an average FPS at or above 60. At 1920x1080, the Ultra preset is the best choice, delivering 153.6 FPS. This is the most demanding setting and it still provides a frame rate that exceeds the refresh rate of most high-end monitors.

At 2560x1440, the Ultra preset also wins, averaging 101.3 FPS. This is well above the 60 FPS target, so there is no reason to lower quality. The system has enough headroom to handle any in-game action without dropping below the threshold.

At 3840x2160, the High preset is the best option, averaging 68.7 FPS. While Ultra is technically playable at 54.1 FPS, it falls short of the 60 FPS mark. High offers a 14.6 FPS improvement over Ultra, making it the recommended choice for a smooth 4K experience.

FAQ

Q: Can this PC run The Technomancer at 4K with max settings?

A: No. At 3840x2160 with Ultra settings, the average FPS is 54.1, which is below the 60 FPS playable threshold. The best playable setting at 4K is High, which averages 68.7 FPS.

Q: What is the highest FPS this system can achieve in this game?

A: The highest recorded average FPS is 295.7 at 1920x1080 with Low settings. At 2560x1440, the maximum is 191.6 FPS on Low, and at 3840x2160 it is 106.9 FPS on Low.

Q: Is the CPU or GPU the bottleneck at 1440p Ultra?

A: At 2560x1440 Ultra, the average FPS is 101.3. The data suggests the GPU is the primary constraint, as the performance gap between Low and Ultra narrows compared to 1080p, but the CPU’s strong single-thread score of 1136 in 3DMark ensures it is not limiting.

Q: How does the RTX 4080 SUPER compare to the RTX 4080 in this game?

A: The RTX 4080 SUPER has an average benchmark score of 54209, while the RTX 4080 scores 54247, a delta of -0.1%. This means they would produce nearly identical frame rates in The Technomancer, with no practical difference in playability.

Q: What is the best way to play at 4K on this system?

A: Use the High preset at 3840x2160, which averages 68.7 FPS. This is the most demanding preset that stays above the 60 FPS threshold, providing a smooth experience without the performance drop seen at Ultra.

Q: Does the CPU matter for 4K performance in this game?

A: No. At 3840x2160, the GPU is the limiting factor. The CPU’s benchmark scores, such as a Cinebench R23 multi-core score of 30745, are irrelevant at 4K because the RTX 4080 SUPER is fully utilized and the frame rate is dictated by GPU throughput.