The Technomancer

The Intel Core i7-12700K and NVIDIA GeForce RTX 2060 combination delivers a solid 1080p experience in The Technomancer, with clear limitations emerging as resolution increases. The recorded data shows this pairing is fully capable of exceeding the 60 FPS threshold at 1080p across all tested presets, but at 1440p only the Low and Medium settings remain fluid, while 4K falls short of playability at every quality level.

Similar Performance Alternatives

Looking at the database's closest matches for this CPU and GPU pairing, the measured performance profile of the Core i7-12700K is nearly indistinguishable from several other processors. The Intel Core i5-13600T sits within 0.1 percent of the average benchmark score, with a delta of -0.1 percent. The Intel Core i7-12700KF is equally close at -0.2 percent, while the Intel Core i7-13700T trails by only 0.3 percent. The Intel Core 5 213PE rounds out the nearest rivals at -0.4 percent. In practice, any of these processors would deliver essentially identical frame pacing in The Technomancer, as the game's demands on CPU throughput are well within the capabilities of all these chips.

On the GPU side, the RTX 2060's average score places it alongside some unexpected company. The NVIDIA GeForce GTX 580 matches almost exactly, with a delta of 0 percent. The AMD Radeon 680M integrated graphics come within 0.1 percent, and the NVIDIA GeForce RTX 3050 OEM is 0.6 percent behind. The AMD Radeon RX 7600 sits 0.8 percent below the RTX 2060 in the database's aggregate scoring. These deltas are small enough that users with any of these GPUs should observe similar frame rates in The Technomancer, though the RTX 2060's modern feature set and driver optimization for DirectX 12 may produce slightly smoother frame pacing in practice.

Measured FPS Breakdown

The database contains measured average FPS values for twelve combinations of resolution and settings, with no minimum or maximum frame time data recorded. At 1920x1080, the results are strong across the board. The Low preset delivers 129.2 FPS average, Medium reaches 101.8 FPS, High produces 83.1 FPS, and Ultra still maintains 65.2 FPS. This represents a performance spread from Ultra to Low of roughly two times, with each step down in quality adding about 18 to 28 FPS.

Moving to 2560x1440, the same preset ladder shows a significant drop. Low settings average 86.5 FPS, Medium falls to 66.8 FPS, High drops to 59.1 FPS, and Ultra manages only 43.7 FPS. The gap between Low and Ultra at this resolution is nearly double, and the transition from High to Ultra alone costs over 15 FPS. The 1440p data indicates that the RTX 2060 begins to hit its memory bandwidth and shading throughput limits here, particularly at the higher quality presets.

At 3840x2160, the RTX 2060 is clearly out of its depth. Low settings average 45.1 FPS, Medium drops to 34.3 FPS, High falls to 27.4 FPS, and Ultra bottoms out at 25.2 FPS. None of these results approach the 60 FPS playability threshold, and even the Low preset fails by a substantial margin. The scaling from 1440p Low to 4K Low shows a reduction of nearly half, indicating that pixel fill rate and memory bandwidth are the dominant constraints at this resolution.

CPU and GPU Roles

The recorded data reveals how the balance of CPU and GPU workload shifts across resolutions in The Technomancer. At 1920x1080, the Core i7-12700K's strong single-thread and multi-thread performance, evidenced by its 3DMark scores of 1043 single-thread and 9979 max-threads, ensures the CPU is not a bottleneck. The GPU handles the majority of the rendering work, and the wide spread between Low at 129.2 FPS and Ultra at 65.2 FPS demonstrates that GPU load scales heavily with settings.

As resolution increases to 2560x1440, the GPU's role becomes more pronounced. The 59.1 FPS average at High settings versus 86.5 FPS at Low shows that the RTX 2060's 336.0 GB/s memory bandwidth and 192-bit bus are being pushed harder. The CPU's contribution remains steady, as the i7-12700K's 20 threads and 25 MB of shared L3 cache provide ample headroom for the game's simulation and AI tasks. The scaling from 1080p High at 83.1 FPS to 1440p High at 59.1 FPS represents a 29 percent reduction, which is consistent with a GPU-limited scenario.

At 3840x2160, the GPU is the overwhelming constraint. The 45.1 FPS at Low settings is only 34 percent higher than the 34.3 FPS at Medium, and the entire preset range spans just 20 FPS from Low to Ultra. This compression indicates that the RTX 2060's raw shading throughput of 6.451 TFLOPS and 48 ROPs cannot keep pace with the pixel demands of 4K, regardless of quality settings. The CPU's role diminishes further, as even the fastest processor would not meaningfully raise these frame rates.

The Verdict

The benchmark results indicate that this PC can run The Technomancer at 1920x1080 with full playability. The Ultra preset averages 65.2 FPS, which clears the 60 FPS threshold with a small margin. High settings at 83.1 FPS and Medium at 101.8 FPS provide additional headroom, while Low at 129.2 FPS is more than sufficient for high refresh rate displays.

At 2560x1440, the verdict is conditional. The database lists Low and Medium as playable settings, with Medium being the best playable option at 66.8 FPS average. High settings fall just short at 59.1 FPS, and Ultra at 43.7 FPS is not recommended for smooth gameplay. Users with 1440p monitors should stick to Medium for a consistent experience.

At 3840x2160, the verdict is clear: this combination cannot run the game at playable frame rates. The best recorded result is 45.1 FPS at Low settings, which is 15 FPS below the 60 FPS threshold. No preset achieves playability at this resolution, and the data shows that even significant settings reductions do not bridge the gap.

FAQ

Q: Can the Intel Core i7-12700K and RTX 2060 run The Technomancer at 1080p Ultra settings?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 65.2 FPS, which stays above the 60 FPS playability threshold.

Q: What is the best playable setting at 2560x1440?

A: The Medium preset is the most demanding setting that remains playable, averaging 66.8 FPS. High settings drop to 59.1 FPS, which is below the 60 FPS threshold.

Q: Is 4K resolution viable with this hardware?

A: No. The highest recorded average at 3840x2160 is 45.1 FPS on Low settings, and every other preset falls between 25.2 and 34.3 FPS. None approach the 60 FPS target.

Q: How does the RTX 2060 compare to its nearest GPU rivals in this game?

A: The database shows the RTX 2060's average score is within 0.8 percent of the AMD Radeon RX 7600, 0.6 percent of the RTX 3050 OEM, and essentially identical to the GTX 580 and Radeon 680M. Frame rates in The Technomancer would be similar across these GPUs.

Q: Does the CPU bottleneck the GPU at any resolution in this game?

A: The data shows GPU-bound behavior at all resolutions. The i7-12700K's 3DMark max-threads score of 9979 and strong multi-core results provide ample headroom, and the frame rate drops from 1080p to 4K are consistent with GPU limitations.

Q: What settings should be used for a 1440p monitor?

A: Medium settings at 2560x1440 yield 66.8 FPS average, which is the best playable preset. Users seeking higher visual quality should consider lowering to 1080p, where Ultra runs at 65.2 FPS.

How This Combo Ranks

Within the database's collection of tested CPU and GPU combinations for The Technomancer, this pairing ranks 2944 out of 3696 total combos. This places it in the lower 20 percent of all tested systems, which is consistent with the RTX 2060 being an entry-level to mid-range GPU from the Turing generation. The rank reflects the GPU's 58th percentile among all tested GPUs, while the i7-12700K sits in the 84th percentile among CPUs. The combination's overall standing is dragged down by the GPU's limitations at higher resolutions, despite the CPU's strong performance.

The rank also contextualizes the 1080p results. While 65.2 FPS at Ultra is playable, many higher-ranked combos in the database achieve this at 1440p or 4K. The 2944th rank indicates that users with this hardware are near the boundary of comfortable 1080p gaming for a 2016-era title like The Technomancer, but they will not have the overhead for future titles with more demanding graphics.

Best Settings per Resolution

At 1920x1080, the best settings that remain at or above 60 FPS are Ultra, with a measured average of 65.2 FPS. This is the most demanding preset and it clears the threshold by 5.2 FPS, providing a small buffer for scene complexity spikes.

At 2560x1440, the best playable settings are Medium, which averages 66.8 FPS. High settings at 59.1 FPS fall just below the 60 FPS line, so Medium is the recommended choice for a stable experience at this resolution.

At 3840x2160, no settings achieve playable frame rates. The database records no valid best settings for this resolution, as even Low at 45.1 FPS misses the 60 FPS target by a substantial margin. Users attempting 4K with this hardware should reduce the resolution or accept sub-60 FPS performance.