Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

27%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
145 FPS
Ultra 1080p Measured
75 FPS

1440p (2K / QHD)

Low 1440p Measured
93 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
49 FPS
Ultra 4K Measured
27 FPS
10.3ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 2,254
Graphics Card
Required 27,947
Your GPU 15,171

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 32 38 49
1440p QHD 50 62 71 93
1080p Full HD 75 97 110 145

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 97
1920x1080 Low 145
1920x1080 Medium 110
1920x1080 Ultra 75
2560x1440 High 62
2560x1440 Low 93
2560x1440 Medium 71
2560x1440 Ultra 50
3840x2160 High 32
3840x2160 Low 49
3840x2160 Medium 38
3840x2160 Ultra 27

Performance Analysis: The Technomancer on Your System

Measured FPS Breakdown

The recorded measurements for The Technomancer with the Intel Core i5-9400 and AMD Radeon RX 7600 span three resolutions and four quality presets. All figures represent average frames per second; the database did not capture minimum or maximum frame values for any configuration.

At 1920x1080, the Low preset delivers 145.2 FPS, the Medium preset reaches 110.2 FPS, and the High preset drops to 96.6 FPS. The Ultra preset, the most demanding of the four, still maintains 74.7 FPS. The scaling from Low to Ultra shows a reduction of 70.5 FPS, or roughly 49% of the Low preset's output.

Moving to 2560x1440, the same pattern appears with lower absolute numbers. Low settings produce 93.2 FPS, Medium yields 71.4 FPS, High falls to 62.2 FPS, and Ultra drops to 50.4 FPS. The gap between Low and Ultra here is 42.8 FPS, a smaller absolute difference than at 1080p but a similar relative decline.

At 3840x2160, performance becomes more constrained. Low settings record 49.2 FPS, Medium drops to 37.5 FPS, High reaches only 32.3 FPS, and Ultra bottoms out at 26.6 FPS. The difference between Low and Ultra at 4K is 22.6 FPS, which represents a 46% reduction from the Low preset's value.

The database shows no min or max FPS entries for any of the twelve tested combinations. This means the analysis relies entirely on average frame rates. The playable threshold for this title is defined as 60 FPS, and the measured averages provide a clear picture of which settings clear that bar.

CPU and GPU Roles

The data indicates that the GPU becomes the dominant constraint as resolution increases. At 1920x1080, the RX 7600 has considerable headroom: even the Ultra preset maintains 74.7 FPS, which is 14.7 FPS above the 60 FPS playability threshold. The CPU's six cores and six threads, paired with a 4.10 GHz boost clock, appear sufficient to feed the GPU at this resolution.

At 2560x1440, the balance shifts. The High preset still clears 60 FPS at 62.2 FPS, but the margin is slim. The Ultra preset falls to 50.4 FPS, a 24% reduction from the High preset's value. This suggests that pixel throughput, not CPU processing, is now the limiting factor. The scaling between 1080p Ultra (74.7 FPS) and 1440p Ultra (50.4 FPS) shows a 32.5% drop, which is consistent with the increased pixel count demanding more from the GPU.

At 3840x2160, the GPU is clearly the bottleneck. Even the Low preset only manages 49.2 FPS, which is below the 60 FPS threshold. The Ultra preset at 26.6 FPS is less than half of the 1440p Ultra result. The CPU's role diminishes further at 4K because the GPU is saturated at all presets. The difference between Low and Ultra at 4K is 22.6 FPS, whereas at 1080p the same preset gap is 70.5 FPS. This compression of the preset scaling at higher resolutions is a classic sign of GPU-bound rendering.

The i5-9400's benchmark profile supports this interpretation. Its Cinebench R23 multicore score of 6629 and single-core score of 935 place it in the 47th percentile among all CPUs. For a 2018 release, this is a capable mid-range processor, but it does not have the thread count or clock headroom to compensate for a GPU that is already working at full capacity. The game's Action RPG genre typically involves real-time combat and dynamic scenes, which can spike CPU demand, but the measured averages do not show any preset where the CPU prevents the GPU from reaching its potential at lower resolutions.

FAQ

Q: Can this PC run The Technomancer at 60 FPS on a 1080p display?

A: Yes. The database shows all four presets at 1920x1080 clear the 60 FPS threshold. The lowest average among them is Ultra at 74.7 FPS, while Low reaches 145.2 FPS.

Q: What is the best preset at 2560x1440?

A: The High preset is the most demanding option that stays at or above 60 FPS, with an average of 62.2 FPS. The Ultra preset falls below the threshold at 50.4 FPS.

Q: Is 4K playable with this combination?

A: No. At 3840x2160, the highest recorded average is 49.2 FPS on Low settings. All other presets are lower: Medium at 37.5 FPS, High at 32.3 FPS, and Ultra at 26.6 FPS. None reach 60 FPS.

Q: How does the GPU compare to its nearest rivals in synthetic benchmarks?

A: The RX 7600 has an average benchmark score of 15171. The NVIDIA GeForce RTX 3050 OEM scores 15199, which is 0.2% higher. The AMD Radeon 680M scores 15270, which is 0.7% higher. The AMD Radeon Pro 560X scores 15082, which is 0.6% lower.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The i5-9400 has an average benchmark score of 2254. The Intel Core i7-1068NG7 scores 2259, which is 0.2% higher. The Intel Core i3-10305 scores 2264, which is 0.4% higher. The Intel Core i7-10710U scores 2248, which is 0.3% lower.

Q: What frame rate can I expect at 1080p with Medium settings?

A: The recorded average is 110.2 FPS, which is well above the playable threshold and nearly double the 60 FPS target.

Similar Performance Alternatives

The nearest rivals for each component provide context for what other hardware might behave similarly in this game. For the CPU, the Intel Core i7-1068NG7 has an average benchmark score of 2259, which is 0.2% higher than the i5-9400's 2254. The Intel Core i3-10305 scores 2264, 0.4% higher. The AMD Ryzen 5 PRO 1500 scores 2246, 0.4% lower. The Intel Core i7-10710U scores 2248, 0.3% lower. These four processors sit within a 1% band of the i5-9400, so swapping in any of them would likely produce nearly identical frame rates in The Technomancer, assuming the GPU remains the same.

For the GPU, the NVIDIA GeForce RTX 3050 OEM has an average benchmark score of 15199, 0.2% higher than the RX 7600's 15171. The AMD Radeon 680M scores 15270, 0.7% higher. The AMD Radeon Pro 560X scores 15082, 0.6% lower. The NVIDIA GeForce GTX 660 Ti scores 15063, 0.7% lower. These four GPUs also cluster tightly around the RX 7600. In practical terms, a system with the i5-9400 and any of these rival GPUs would show FPS numbers within a few frames of the measurements reported here.

It is notably the rival list includes both integrated graphics (the Radeon 680M) and older discrete cards (the GTX 660 Ti). The synthetic benchmark similarity does not guarantee identical gaming behavior, but for a title like The Technomancer from 2016, the differences would likely be minor at 1080p and only slightly more pronounced at higher resolutions where memory bandwidth and pixel throughput matter more.

The Verdict

The data shows that this combination can run The Technomancer at 60 FPS or higher on 1920x1080 displays across all four presets. The Ultra preset delivers 74.7 FPS, providing a comfortable margin above the threshold. At 2560x1440, the playable settings are Low (93.2 FPS), Medium (71.4 FPS), and High (62.2 FPS). The Ultra preset at 1440p falls to 50.4 FPS, which is below the playable threshold.

At 3840x2160, no preset reaches 60 FPS. The Low setting comes closest at 49.2 FPS, but the database's verdictByResolution field lists no playable settings for 4K. The best case scenario at 4K is Low at 49.2 FPS, which is 10.8 FPS short of the target.

For users with a 1080p monitor, this system is fully capable of running the game at maximum quality. For 1440p users, High is the ceiling for smooth gameplay. For 4K users, the system is not suitable for this game at the playable threshold, and even Low settings will produce frame rates that feel stuttery in fast-paced combat sequences.

How This Combo Ranks

The database ranks this specific CPU and GPU pairing at position 2513 out of 3696 tested combinations for The Technomancer. This places it in the 32nd percentile of all tested systems, meaning roughly two-thirds of tested configurations delivered better average performance. The ranking reflects the combination of a 47th percentile CPU and a 57th percentile GPU.

The relatively low rank is not surprising given the game's age and the hardware's release dates. The i5-9400 launched in 2018, and the RX 7600 launched in 2023. The game itself came out in 2016. The combination is effective at 1080p and acceptable at 1440p, but it does not compete with higher-end modern systems that occupy the top of the database rankings. The rank of 2513 out of 3696 suggests that while this system handles the game competently at mainstream resolutions, it is not a standout performer among the full range of tested hardware.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 74.7 FPS. This is the maximum quality setting available, so the system has no further headroom to explore beyond the game's built-in preset options.

At 2560x1440, the best playable preset is High, with an average of 62.2 FPS. The Ultra preset drops to 50.4 FPS, which is 9.6 FPS below the threshold. The difference between High and Ultra at this resolution is 11.8 FPS, so choosing High sacrifices some visual fidelity but maintains smooth playback.

At 3840x2160, no preset clears 60 FPS. The database's verdictByResolution field marks all 4K settings as unplayable, and the bestSettings value is null. The highest recorded average at 4K is 49.2 FPS on Low, which is below the threshold. Users with 4K displays would need to either reduce resolution or accept sub-60 FPS performance. The measured data does not include any resolution scaling options, so the analysis is limited to the native 4K presets tested.