Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
77 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
10.2ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 48,618
Graphics Card
Required 27,947
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 41 54
1440p QHD 50 64 75 98
1080p Full HD 77 98 115 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 150
1920x1080 Medium 115
1920x1080 Ultra 77
2560x1440 High 64
2560x1440 Low 98
2560x1440 Medium 75
2560x1440 Ultra 50
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: The Technomancer on Your System

The Intel Core i5-14600K paired with the NVIDIA GeForce RTX 5050 presents a clear picture for The Technomancer: this is a solid 1080p and 1440p machine, but it cannot handle 4K. Benchmark data for this Action RPG shows the combo ranking 2269th out of 3696 tested combinations, placing it in the lower-middle tier of systems overall. The 14600K sits in the 90th percentile of all CPUs, while the RTX 5050 holds the 66th percentile among GPUs, indicating the processor is not the limiting factor here. The measured frame rates confirm that the GPU is the bottleneck, especially at higher resolutions where the 8 GB of GDDR6 memory and 320.0 GB/s bandwidth struggle to keep pace with the demand of 3840x2160 output.

Measured FPS Breakdown

At 1920x1080, the combo delivers consistently playable performance across all four settings. The Low preset averages 150 FPS, which is the highest frame rate recorded for this configuration. Medium settings see a drop to 115 FPS average, with a minimum of 98 FPS and a maximum of 132 FPS, showing tight frame pacing. High settings bring the average down to 98 FPS, and even the demanding Ultra preset maintains a 77 FPS average. None of these 1080p results dip below the 60 FPS playable threshold, making this resolution a safe bet for high-refresh monitors.

Moving to 2560x1440, the picture remains positive but with more variation. The Low preset still achieves a brisk 98 FPS average. Medium settings average 75 FPS, with the minimum recorded at 64 FPS and the maximum at 87 FPS. High settings hold a 64 FPS average, which just clears the playable bar. Ultra settings, however, fall short at 50 FPS average, meaning players will need to dial back from the highest preset to maintain smooth gameplay at this resolution.

At 3840x2160, the RTX 5050 runs out of headroom. The Low preset manages a 54 FPS average, which is below the 60 FPS threshold. Medium settings average 41 FPS, with a minimum of 35 FPS and a maximum of 48 FPS. High settings drop to 35 FPS average, and Ultra is the worst at 28 FPS average. No 4K preset achieves the 60 FPS minimum required for playable status, so this resolution is effectively off the table for this hardware combination.

How This Combo Ranks

The combination ranks 2269th out of 3696 tested combos for The Technomancer, which places it in the 61st percentile of all tested systems. This ranking is heavily influenced by the GPU's mid-tier standing — the RTX 5050 sits at the 66th percentile among all GPUs, which is respectable for a mainstream card. The CPU, however, is a top-tier performer at the 90th percentile, meaning the i5-14600K is doing much more heavy lifting than the graphics card in most scenarios.

The delta between CPU and GPU performance is stark. The i5-14600K's average benchmark score of 48618 is nearly 2.3 times higher than the RTX 5050's average score of 21035. In practical terms for The Technomancer, this means the GPU dictates the frame rate ceiling. The CPU's high single-core score of 2064 in Cinebench R23 and multi-core score of 24491 suggest it would not bottleneck the GPU even in CPU-intensive scenes, but the GPU's 13.17 TFLOPS FP32 performance is simply not enough to push high pixel counts at 4K.

The combo rank of 2269 is lower than what the CPU's percentile might suggest because the GPU drags the overall score down. Players with this pairing should expect that any upgrade path involves swapping out the RTX 5050 first, as the i5-14600K has ample headroom to support a faster graphics card without becoming a bottleneck.

Best Settings per Resolution

For 1920x1080, the best playable setting is Ultra, which achieves a 77 FPS average. This is the most demanding preset that stays at or above 60 FPS, and it clears the threshold by a comfortable margin. Players can run the game at maximum visual fidelity without worrying about frame drops below the playable line.

At 2560x1440, the best playable setting is High, with a 64 FPS average. This preset just barely clears the 60 FPS threshold, so users should be aware that demanding scenes might cause minor dips. The Medium preset offers a safer 75 FPS average for those who prefer a larger buffer, but High is technically the best setting that maintains playability.

For 3840x2160, there is no playable setting. Even the Low preset averages only 54 FPS, which falls short of the 60 FPS threshold. The verdict data confirms this: the playable settings list for 4K is empty, and the best settings field is null. Players attempting 4K will need to lower the resolution or upgrade the GPU.

Similar Performance Alternatives

The i5-14600K's nearest rivals in CPU benchmarks are all within a narrow performance band. The Intel Xeon Gold 5318H scores 48698 on average, just 0.2% higher than the i5-14600K's 48618. The AMD EPYC 4345P scores 48470, which is 0.3% lower. The Intel Core Ultra 5 245HX scores 48287, 0.7% lower, and the Intel Core Ultra 5 245 scores 48995, 0.8% higher. For The Technomancer, any of these CPUs would deliver nearly identical frame rates when paired with the same GPU, as the game is not particularly CPU-bound at these performance levels.

On the GPU side, the RTX 5050's nearest rivals show a similar clustering. The AMD Radeon RX Vega M GL averages 21153, which is 0.6% higher than the RTX 5050's 21035. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, 1.6% lower, and the NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. In practice, swapping the RTX 5050 for any of these cards would produce nearly indistinguishable frame rates in The Technomancer at the same settings and resolution.

For players considering a system with these alternatives, the performance profile remains the same: 1080p and 1440p are playable at mid-to-high settings, while 4K is out of reach. The 1-2% differences between these GPUs are well within the margin of error for real-world gameplay, so choosing any one over another should come down to price and availability rather than performance.

FAQ

Q: Can this PC run The Technomancer at 1920x1080 with Ultra settings?

A: Yes. The measured average FPS at 1080p Ultra is 77 FPS, which is above the 60 FPS playable threshold. This is the best playable setting at this resolution.

Q: What is the highest resolution this combo can handle?

A: The highest resolution with playable settings is 2560x1440. At this resolution, the High preset achieves a 64 FPS average, which clears the 60 FPS threshold. The 3840x2160 resolution has no playable settings.

Q: How does the RTX 5050 compare to the RX 5600 XT in this game?

A: The RTX 5050 averages 21035 in benchmark scores, which is 1.6% higher than the RX 5600 XT's 20713. In real gameplay, the difference would be negligible, with both cards delivering similar frame rates at the same settings.

Q: Is the i5-14600K a bottleneck for the RTX 5050 in The Technomancer?

A: No. The i5-14600K ranks in the 90th percentile of all CPUs, while the RTX 5050 ranks in the 66th percentile of all GPUs. The GPU is the limiting factor, and the CPU has significant headroom.

Q: What FPS can I expect at 2560x1440 with Medium settings?

A: The average FPS is 75, with a minimum of 64 FPS and a maximum of 87 FPS. This provides a comfortable buffer above the 60 FPS playable threshold.

Q: Is 4K gaming possible with any settings on this hardware?

A: No. The best 4K result is 54 FPS average on Low settings, which is below the 60 FPS threshold. The verdict data shows no playable settings at 3840x2160.

The Verdict

The Intel Core i5-14600K + NVIDIA GeForce RTX 5050 combination is a capable 1080p and 1440p gaming system for The Technomancer, but it falls short of 4K entirely. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra averaging 77 FPS. This makes it a strong choice for high-refresh 1080p monitors. At 2560x1440, the High preset averages 64 FPS, which is playable, and the Medium preset offers a more comfortable 75 FPS average. The Ultra preset at 1440p drops to 50 FPS, so players must sacrifice some visual quality to maintain smooth gameplay.

For 3840x2160, the verdict is clear: this combo cannot run the game at playable frame rates. The Low preset averages only 54 FPS, and every other preset is below 41 FPS. The 8 GB VRAM and 128-bit memory bus of the RTX 5050 are insufficient for the pixel throughput required at 4K. Players who own a 4K display should either run the game at 1440p or consider a GPU upgrade, as the i5-14600K has ample performance headroom to support a faster card. Overall, this is a balanced mainstream build that excels at 1080p and handles 1440p well, but it is not a 4K solution.