Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
298 FPS
Ultra 1080p Measured
150 FPS

1440p (2K / QHD)

Low 1440p Measured
191 FPS
Ultra 1440p Measured
99 FPS

4K (Ultra HD)

Low 4K Measured
104 FPS
Ultra 4K Measured
57 FPS
5.2ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 48,618
Graphics Card
Required 27,947
Your GPU 54,209

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 57 72 82 104
1440p QHD 99 126 146 191
1080p Full HD 150 193 227 298

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 193
1920x1080 Low 298
1920x1080 Medium 227
1920x1080 Ultra 150
2560x1440 High 126
2560x1440 Low 191
2560x1440 Medium 146
2560x1440 Ultra 99
3840x2160 High 72
3840x2160 Low 104
3840x2160 Medium 82
3840x2160 Ultra 57

Performance Analysis: The Technomancer on Your System

The Intel Core i5-14600K and NVIDIA GeForce RTX 4080 SUPER combination delivers a robust experience in The Technomancer, with benchmark data showing that the system clears the 60 FPS playable threshold at every resolution tested, though the margin shrinks considerably at 4K with maximum settings. Across twelve measured configurations spanning three resolutions and four quality presets, the average frame rates range from a demanding 56.9 FPS at 3840x2160 Ultra to a blistering 298.2 FPS at 1920x1080 Low, indicating that this pairing is more than capable of handling the 2016 Action RPG's demands with substantial headroom in most scenarios.

Measured FPS Breakdown

The measured data reveals a clear performance hierarchy tied to both resolution and preset. At 3840x2160, the RTX 4080 SUPER’s 16 GB of GDDR6X memory and 736.3 GB/s bandwidth are put to work, producing an average of 71.6 FPS on High settings. Dropping to Medium increases the average to 81.8 FPS, while Low settings push the frame rate to 104.1 FPS. The Ultra preset is the only configuration that falls below the 60 FPS playable threshold, with an average of 56.9 FPS — a 20.5% reduction compared to High settings, which is the most substantial single-step drop in the 4K results.

Stepping down to 2560x1440 shows the GPU stretching its legs considerably. The High preset delivers an average of 126 FPS, which is 76% higher than the same preset at 4K. Medium reaches 146.4 FPS, Low hits 191.1 FPS, and even Ultra maintains a comfortable 98.8 FPS average. The scaling from 4K to 1440p is consistent across presets, with the Ultra setting improving by 73.6% (from 56.9 to 98.8 FPS) and the Low setting improving by 83.6% (from 104.1 to 191.1 FPS). This indicates that the GPU is the primary bottleneck at higher resolutions, as the frame rate gains are disproportionate to the pixel count reduction.

At 1920x1080, the combination becomes almost absurdly fast. The High preset averages 192.9 FPS, Medium reaches 227.1 FPS, and Ultra maintains 150.2 FPS. The Low preset produces 298.2 FPS, which is nearly five times the playable threshold of 60 FPS. The delta between 1440p and 1080p is smaller than the delta between 4K and 1440p, suggesting diminishing returns as resolution decreases. For example, the High preset improves from 126 FPS at 1440p to 192.9 FPS at 1080p — a 53% gain — while the jump from 4K High to 1440p High was 76%. This pattern confirms that the CPU (Intel Core i5-14600K) begins to exert more influence at lower resolutions, though with a 14-core, 20-thread configuration and a boost clock of 5.30 GHz, it remains far from a limiting factor in this title.

The minimum and maximum frame rate data is not available in the measured results, so the analysis relies solely on average FPS figures. However, the consistency of the scaling between settings and resolutions suggests stable performance without severe frame time spikes, which is typical for a game from this era running on modern high-end hardware.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for how this combination compares to other hardware that would produce similar results in The Technomancer. The Intel Core i5-14600K holds an average benchmark score of 48,618 across all tests, placing it in the 90th percentile of all CPUs. Its closest competitor is the Intel Xeon Gold 5318H, which scores 48,698 — just 0.2% higher, making the two effectively identical in multi-threaded workloads. The AMD EPYC 4345P trails by 0.3% with a score of 48,470, while the Intel Core Ultra 5 245HX is 0.7% behind at 48,287. The Intel Core Ultra 5 245 is the only rival that outperforms the i5-14600K, scoring 48,995 for a 0.8% lead. These differences are negligible in gaming scenarios, meaning any of these processors paired with the RTX 4080 SUPER would yield nearly identical frame rates in The Technomancer.

On the GPU side, the NVIDIA GeForce RTX 4080 SUPER achieves an average benchmark score of 54,209, ranking in the 86th percentile of all GPUs. Its nearest rival is the standard NVIDIA GeForce RTX 4080, which scores 54,247 — a mere 0.1% difference that is effectively within measurement noise. The AMD Radeon Pro W5700X is 1.1% slower at 54,828, while the AMD Radeon RX 6750 GRE 12 GB trails by 2.7% with a score of 55,698. The AMD Radeon 8060S is 2.8% behind at 55,757. For The Technomancer, a system built with an RTX 4080 (non-SUPER) would produce frame rates within 1% of this configuration, making it the most direct alternative. The AMD options, while slightly lower in raw benchmark scores, would still comfortably exceed the 60 FPS threshold at all playable settings, though the exact gaming performance may vary slightly from the measured data.

CPU and GPU Roles

The benchmark results indicate that the GPU plays the dominant role in The Technomancer at higher resolutions, while the CPU becomes more relevant as resolution decreases. The evidence is in the scaling patterns. Moving from 3840x2160 to 2560x1440 produces an average frame rate increase of roughly 76-84% across presets, which is close to the theoretical pixel reduction of 56% (from 8.3 million to 3.7 million pixels). This disproportionate gain suggests that the GPU is heavily loaded at 4K, and reducing resolution relieves that pressure significantly. The RTX 4080 SUPER’s 52.22 TFLOPS of FP32 performance and 816.0 GTexel/s texture rate are the key specifications driving this behavior, as the game’s rendering demands scale almost linearly with pixel count.

When moving from 2560x1440 to 1920x1080, the frame rate gains shrink to roughly 53-56% across presets, despite a similar pixel reduction of 44% (from 3.7 million to 2.1 million pixels). This smaller-than-expected improvement indicates that the CPU, specifically the Intel Core i5-14600K, is starting to limit performance. The processor’s PassMark single-thread score of 4,270 and Cinebench R23 single-core score of 2,064 show strong single-thread capability, but the game’s engine appears to have a ceiling around 298 FPS at 1080p Low, which is likely a CPU or engine-level constraint rather than a GPU limitation. The fact that the Low preset at 1080p reaches 298.2 FPS while the High preset reaches 192.9 FPS (a 54.6% difference) further supports this, as the GPU should handle both presets with ease at this resolution.

The Ultra preset behavior reinforces this analysis. At 4K Ultra, the system averages 56.9 FPS — below the playable threshold — while at 1440p Ultra it reaches 98.8 FPS, and at 1080p Ultra it hits 150.2 FPS. The scaling from 4K to 1440p is 73.6%, but from 1440p to 1080p it is only 52%. This asymmetric scaling across resolution steps, combined with the fact that the Ultra preset at 1080p still achieves over 2.5 times the playable threshold, confirms that the GPU is the limiting factor at 4K while the CPU begins to cap performance at 1080p. For players targeting the highest refresh rates, the i5-14600K’s 20 threads and 5.30 GHz boost clock provide sufficient headroom, but the data suggests that further CPU upgrades would yield diminishing returns at 1080p.

The Verdict

This PC configuration can absolutely run The Technomancer, and it does so with significant authority at most settings. The verdict by resolution is clear: at 1920x1080, all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, with the best playable setting being Ultra at an average of 150.2 FPS. At 2560x1440, the same is true — all presets are playable, and Ultra delivers 98.8 FPS, which is the recommended choice for the best visual quality while maintaining a comfortable margin above 60 FPS. At 3840x2160, the situation is slightly more nuanced: High, Medium, and Low settings all average above 60 FPS (71.6, 81.8, and 104.1 FPS respectively), but Ultra falls to 56.9 FPS, which is below the playable threshold. The data suggests High is the best playable setting at 4K, offering a 25.8% improvement over Ultra while still delivering 71.6 FPS.

For players with 4K displays, the choice is between sacrificing some visual fidelity for smooth gameplay or accepting a sub-60 FPS experience at maximum settings. The 71.6 FPS at High is well within the playable range, and the difference between High and Ultra in actual gameplay may be marginal depending on the scene complexity. At 1440p and 1080p, there are no compromises necessary — the system has ample headroom to run the game at its highest preset with frame rates that exceed 98 FPS, making it suitable for high-refresh-rate monitors. The overall verdict is that this combination is overkill for the game at lower resolutions but provides a solid 4K experience when settings are adjusted appropriately.

FAQ

Q: What is the highest playable setting at 3840x2160?

A: The High preset is the best playable setting at 4K, delivering an average of 71.6 FPS, which exceeds the 60 FPS playable threshold. The Ultra preset falls short at 56.9 FPS, making it unplayable by the standard threshold.

Q: Can this system run the game at 2560x1440 with maximum settings?

A: Yes, the Ultra preset at 2560x1440 averages 98.8 FPS, which is well above the 60 FPS threshold. All four presets at this resolution — Low at 191.1 FPS, Medium at 146.4 FPS, High at 126 FPS, and Ultra at 98.8 FPS — are playable.

Q: How much performance is lost when moving from 1920x1080 to 3840x2160 at High settings?

A: The average frame rate drops from 192.9 FPS at 1080p High to 71.6 FPS at 4K High, representing a 62.9% reduction. This is primarily due to the GPU being fully utilized at the higher resolution.

Q: How does the RTX 4080 SUPER compare to the standard RTX 4080 in benchmark scores?

A: The RTX 4080 SUPER has an average benchmark score of 54,209, while the RTX 4080 scores 54,247. The difference is only 0.1%, meaning the two GPUs would perform nearly identically in The Technomancer.

Q: Is the CPU or GPU the limiting factor at 1920x1080?

A: The data indicates the CPU becomes more relevant at 1080p, as frame rate gains from lowering resolution shrink compared to the gains seen when moving from 4K to 1440p. The Intel Core i5-14600K’s single-thread performance likely caps the maximum frame rate around 298 FPS at Low settings.

Q: What is the best overall setting for a 1440p display?

A: The Ultra preset at 2560x1440 provides the highest visual quality with an average of 98.8 FPS, making it the recommended choice for 1440p displays. It offers 39 FPS of headroom above the playable threshold.

How This Combo Ranks

In the database of tested combinations for The Technomancer, this configuration of the Intel Core i5-14600K and NVIDIA GeForce RTX 4080 SUPER ranks 271st out of 3,696 total combos, placing it in the top 7.3% of all tested systems. This ranking reflects the combination’s strong overall performance across the measured scenarios. The CPU’s 90th percentile ranking among all processors and the GPU’s 86th percentile ranking among all GPUs contribute to a system that is well above average for this title, which is consistent with the frame rate data showing 60+ FPS at nearly every configuration. The rank of 271 indicates that there are 270 other combinations that perform better, likely featuring higher-end components such as the RTX 4090 or flagship server CPUs, but for a mainstream desktop pairing, this system sits comfortably in the upper echelon. The 4K Ultra result of 56.9 FPS is the primary factor preventing a higher rank, as most top-tier systems would likely clear 60 FPS at that setting. Nevertheless, the overall versatility across resolutions and presets makes this a strong choice for The Technomancer, with the data showing that players can expect excellent performance at 1080p and 1440p, and very good performance at 4K with minor settings adjustments.