Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

72%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
142 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
93 FPS
Ultra 1440p Measured
48 FPS

4K (Ultra HD)

Low 4K Measured
51 FPS
Ultra 4K Measured
26 FPS
10.8ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 32,279
Graphics Card
Required 27,947
Your GPU 18,093

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 34 39 51
1440p QHD 48 61 71 93
1080p Full HD 73 93 109 142

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 93
1920x1080 Low 142
1920x1080 Medium 109
1920x1080 Ultra 73
2560x1440 High 61
2560x1440 Low 93
2560x1440 Medium 71
2560x1440 Ultra 48
3840x2160 High 34
3840x2160 Low 51
3840x2160 Medium 39
3840x2160 Ultra 26

Performance Analysis: The Technomancer on Your System

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 2060 SUPER delivers a clear, resolution-dependent performance profile for The Technomancer. The database measurements show that this combination is fully capable of smooth gameplay at 1080p with maximum settings, remains playable at 1440p with a high preset, but falls short of the 60 FPS threshold at 4K regardless of settings. The data indicates a system that is well-balanced for mainstream resolutions, with the GPU becoming the primary limiting factor as resolution increases.

Best Settings per Resolution

At 3840x2160, no preset in the recorded data reaches the 60 FPS playability threshold. The highest average frame rate observed at this resolution is 51 FPS on Low settings, which still falls below the target. Medium settings produce 39 FPS, High drops to 34 FPS, and Ultra trails at 26 FPS. Consequently, the database does not assign a best playable setting for 4K, as every option is below 60 FPS.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is High, with an average of 61 FPS. This is a marginal pass, sitting just one frame above the threshold. Medium settings average 71 FPS, while Low reaches 93 FPS. Ultra, however, drops to 48 FPS and is not considered playable under the 60 FPS rule.

At 1920x1080, the most demanding preset that maintains at least 60 FPS is Ultra, averaging 73 FPS. This leaves headroom above the threshold. High averages 93 FPS, Medium reaches 109 FPS, and Low peaks at 142 FPS. All four presets clear 60 FPS at this resolution, making Ultra the recommended choice for maximum visual quality without sacrificing smoothness.

FAQ

Q: Can this PC run The Technomancer at 60 FPS on 1080p with Ultra settings?

A: Yes. The measured average frame rate at 1920x1080 with Ultra settings is 73 FPS, which is above the 60 FPS playability threshold.

Q: What is the best playable setting at 1440p?

A: The High preset is the most demanding option that stays playable, with an average of 61 FPS. Ultra at 1440p averages only 48 FPS and is below the threshold.

Q: Is 4K gaming viable with this hardware for this game?

A: No. The verdict data shows no playable settings at 3840x2160. The highest average FPS at 4K is 51 on Low, which is still below 60 FPS.

Q: How much performance difference is there between Low and Ultra at 1080p?

A: The average frame rate jumps from 142 FPS on Low to 73 FPS on Ultra, a decrease of 69 FPS when moving to the highest preset.

Q: Does the game run better at 1440p Low than at 1080p Ultra?

A: Yes. 1440p Low averages 93 FPS, while 1080p Ultra averages 73 FPS. The resolution increase is offset by the lower preset, resulting in higher frame rates.

Q: What are the minimum and maximum FPS recorded at Medium settings?

A: At 1920x1080 Medium, the minimum is 93 FPS and the maximum is 126 FPS. At 2560x1440 Medium, the minimum is 61 FPS and the maximum is 82 FPS. At 3840x2160 Medium, the minimum is 33 FPS and the maximum is 45 FPS.

Measured FPS Breakdown

At 3840x2160, the recorded data shows a steady decline in average frame rates as settings increase. Low settings deliver 51 FPS, Medium averages 39 FPS with a minimum of 33 FPS and a maximum of 45 FPS, High averages 34 FPS, and Ultra averages 26 FPS. No minimum or maximum values are recorded for Low, High, or Ultra at this resolution, only the average.

At 2560x1440, the average scores are notably higher. Low reaches 93 FPS, Medium averages 71 FPS with a minimum of 61 FPS and a maximum of 82 FPS, High averages 61 FPS, and Ultra averages 48 FPS. The Medium preset provides the only min/max range in this resolution, with the other presets reporting averages only.

At 1920x1080, the system performs best overall. Low averages 142 FPS, Medium averages 109 FPS with a minimum of 93 FPS and a maximum of 126 FPS, High averages 93 FPS, and Ultra averages 73 FPS. The spread between Low and Ultra is 69 FPS, showing that the game scales significantly with preset selection at this resolution. The data pattern across resolutions indicates a consistent scaling factor: moving from 1080p to 1440p reduces average FPS by roughly one-third to one-half depending on the preset, and moving from 1440p to 4K reduces it further by a similar proportion.

Similar Performance Alternatives

For the CPU, the Intel Core i5-14400F sits within a tight cluster of comparable processors. Its nearest rival, the AMD Ryzen 7 PRO 8840U, has an average benchmark score of 32233, which is 0.1% lower than the i5-14400F's score of 32279. The Intel Core i9-11900 scores 32226, a 0.2% deficit. The AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher, and the Intel Core i7-12800H scores 32121, a 0.5% difference. These deltas are minimal, meaning any of these CPUs would produce nearly identical frame rates in The Technomancer, as the game's performance at higher resolutions is likely more dependent on the GPU.

For the GPU, the NVIDIA GeForce RTX 2060 SUPER has an average benchmark score of 18093. Its nearest rivals include the NVIDIA GeForce RTX 3060 Mobile with a score of 18159 (0.4% higher), the AMD Radeon Pro 5700 with 18189 (0.5% higher), the AMD Radeon RX 460 with 18373 (1.5% higher), and the Intel Arc A770M with 18383 (1.6% higher). Despite the RX 460 and Arc A770M showing slightly higher average scores, these differences are within 2%, so all four alternatives would deliver nearly indistinguishable performance in this game. Users with any of these GPUs should expect similar playability results, barring driver-specific behavior that is not captured in the aggregate data.

The Verdict

The recorded verdict by resolution is definitive. At 3840x2160, the list of playable settings is empty, meaning this PC cannot run The Technomancer at 60 FPS on any preset at 4K. The best recorded average at this resolution is 51 FPS on Low, which is still below the threshold.

At 2560x1440, the playable settings are High, Low, and Medium, with High being the best option at 61 FPS average. This is a slim margin above the 60 FPS line, so users should be prepared for occasional dips, though the Medium preset offers a safer 71 FPS average.

At 1920x1080, all four presets are playable, including Ultra at 73 FPS average. This is the resolution where the combination shines, providing a comfortable margin above 60 FPS even at maximum settings. The data supports the conclusion that this system is a solid 1080p performer and a capable 1440p machine for this title, but it is not suitable for 4K gaming at the target frame rate.

How This Combo Ranks

Within the database of tested combinations, this pairing of the Intel Core i5-14400F and NVIDIA GeForce RTX 2060 SUPER ranks 2609 out of 3696 total combos for The Technomancer. This places it in the lower third of all tested systems, which aligns with the observed performance: it handles 1080p and 1440p well but fails at 4K. The rank reflects the GPU's age and position in the performance hierarchy, as the CPU is relatively modern and powerful. The percentile data supports this interpretation: the CPU sits in the 83rd percentile of all CPUs, while the GPU sits in the 62nd percentile of all GPUs. The combo rank is therefore dragged down by the GPU, which is the bottleneck at higher resolutions.

CPU and GPU Roles

The scaling between resolutions and presets reveals that the GPU is the dominant factor in this game's performance. At 1080p, the CPU has enough headroom to push frame rates from 142 FPS on Low to 73 FPS on Ultra, indicating that the GPU is handling the rendering load without the CPU limiting it. The drop from 1080p Ultra (73 FPS) to 1440p Ultra (48 FPS) is a 25 FPS decrease, a 34% reduction, which is consistent with a GPU-bound scenario where pixel count increases sharply.

At 1440p, the GPU is clearly the limiting component. High settings average 61 FPS, just above the threshold, while Ultra drops to 48 FPS. The CPU's capabilities, evidenced by its high benchmark scores (21645 in Cinebench R23 multi-core, 3055 in single-core), are sufficient to feed the GPU at this resolution, but the RTX 2060 SUPER cannot maintain 60 FPS on the highest preset.

At 4K, the GPU is overwhelmed. Even Low settings only reach 51 FPS, and Ultra falls to 26 FPS. The CPU's role becomes negligible here, as the GPU's raw throughput, 7.181 TFLOPS FP32, is insufficient for the 8.3 million pixels at 3840x2160. The data shows that the CPU scaling between presets is consistent across resolutions, but the absolute frame rates are dictated by the GPU's ability to fill pixels. For users seeking higher performance at 1440p or 4K, upgrading the GPU would be the effective path, while the i5-14400F would not need replacement for this title.