Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
141 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
91 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
50 FPS
Ultra 4K Measured
27 FPS
10.8ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 25,292
Graphics Card
Required 27,947
Your GPU 18,093

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 32 41 50
1440p QHD 47 63 70 91
1080p Full HD 73 93 111 141

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 93
1920x1080 Low 141
1920x1080 Medium 111
1920x1080 Ultra 73
2560x1440 High 63
2560x1440 Low 91
2560x1440 Medium 70
2560x1440 Ultra 47
3840x2160 High 32
3840x2160 Low 50
3840x2160 Medium 41
3840x2160 Ultra 27

Performance Analysis: The Technomancer on Your System

The Technomancer is an Action RPG that places distinct demands on both the processor and the graphics card. For the combination of the Intel Core i5-13400F and the NVIDIA GeForce RTX 2060 SUPER, the recorded data shows a system that is fully capable of delivering smooth gameplay at 1080p and 1440p, but it falls short of the 60 FPS target at 4K. The benchmark results indicate that this pairing is best suited for high-refresh-rate monitors at 1920x1080 and for high-quality settings at 2560x1440.

Similar Performance Alternatives

The Intel Core i5-13400F sits in a competitive performance tier according to the database. Its average benchmark score of 25292 places it near several other processors. The AMD Ryzen 9 6900HS achieves an average score of 25284, which is essentially identical with a 0% delta. The Intel Core 5 120 and the AMD Ryzen 5 5600X3D both score 25362 and 25365 respectively, each showing a negligible 0.3% difference from the i5-13400F. The AMD Ryzen 7 6800H trails slightly with a score of 25201, a 0.4% delta. These four processors represent the closest performance alternatives, meaning a system built with any of them would deliver nearly indistinguishable CPU-bound behavior in The Technomancer. The i5-13400F also holds a 77th percentile ranking among all CPUs in the database, confirming that it is a strong performer for gaming workloads.

On the GPU side, the NVIDIA GeForce RTX 2060 SUPER has an average benchmark score of 18093 and sits in the 62nd percentile among all GPUs. Its nearest rivals in the database are the NVIDIA GeForce RTX 3060 Mobile with a score of 18159 and a 0.4% delta, the AMD Radeon Pro 5700 with a score of 18189 and a 0.5% delta, the AMD Radeon RX 460 with a score of 18373 and a 1.5% delta, and the Intel Arc A770M with a score of 18383 and a 1.6% delta. All of these graphics cards are within a narrow performance band, so users with any of them can expect similar frame rates in The Technomancer. The RTX 2060 SUPER is slightly below these alternatives in raw benchmark terms, but the differences are small enough that gameplay experience would be comparable.

CPU and GPU Roles

Determining which component matters more for The Technomancer requires examining how frame rates scale with resolution and settings. The recorded data shows clear trends. At 1920x1080 with Low settings, the system produces 140.5 FPS. This high frame rate suggests that the CPU is capable of feeding the GPU with enough data, and the GPU is not yet the primary bottleneck. Moving to Medium settings at the same resolution drops the average to 111.1 FPS, and High settings produce 92.8 FPS. Ultra settings at 1080p yield 72.8 FPS. The consistent decline in frame rates as graphical settings increase indicates that the GPU is taking on more work, but the CPU still has headroom.

At 2560x1440, the pattern continues but the GPU load becomes more pronounced. Low settings produce 91 FPS, Medium drops to 70.3 FPS, and High settings yield 63.4 FPS. Ultra settings fall to 46.7 FPS. The step from 1080p to 1440p at the same settings shows a significant frame rate reduction. For example, High settings go from 92.8 FPS at 1080p to 63.4 FPS at 1440p, a drop of roughly 32%. Low settings drop from 140.5 FPS to 91 FPS, a reduction of about 35%. This scaling indicates that the GPU is becoming the limiting factor as resolution increases, because the CPU workload does not change with resolution while the GPU must render more pixels.

At 3840x2160, the GPU is clearly the dominant constraint. The RTX 2060 SUPER cannot maintain 60 FPS at any preset. Low settings produce 49.9 FPS, Medium drops to 40.5 FPS, High yields 32.2 FPS, and Ultra falls to 27.3 FPS. The frame rate drops by roughly 20% from Low to Medium, another 20% from Medium to High, and another 15% from High to Ultra. These large declines at every step show that the graphics card is saturated. The CPU, which demonstrated strong multi-threaded performance with a Cinebench R23 multi-core score of 22604 and a single-core score of 3191, is not the limiting factor here. The i5-13400F has 10 cores and 16 threads with a boost clock of 4.60 GHz, which provides ample processing power for this game's logic. The recorded data points to the RTX 2060 SUPER as the component that dictates playability at higher resolutions.

For users deciding where to invest, the data suggests that at 1080p the CPU and GPU are more balanced, but even at this resolution the GPU scaling between presets is steep. At 1440p and above, the GPU is the clear bottleneck. The i5-13400F's benchmark results, including a Geekbench multi-core score of 11068 and a single-core score of 1996, support the conclusion that the processor is not holding back the system in The Technomancer.

Best Settings per Resolution

The playable threshold for this analysis is 60 FPS. Using the recorded measurements, the best settings for each resolution are determined by selecting the most demanding preset that maintains an average frame rate at or above this threshold.

At 1920x1080, all four presets clear 60 FPS. Low settings run at 140.5 FPS, Medium at 111.1 FPS, High at 92.8 FPS, and Ultra at 72.8 FPS. The most demanding preset that stays at or above 60 FPS is Ultra, with an average of 72.8 FPS. This is the optimal choice for 1080p gaming, as it delivers the highest visual quality while still providing a comfortable margin above the playable threshold. The 72.8 FPS average leaves enough headroom for minor frame time fluctuations without dropping below 60 FPS.

At 2560x1440, the situation changes. Low settings produce 91 FPS, Medium yields 70.3 FPS, and High delivers 63.4 FPS. All three of these presets are playable. Ultra settings, however, drop to 46.7 FPS, which is below the 60 FPS target. The best settings for 1440p are therefore High, with an average frame rate of 63.4 FPS. This provides the highest visual quality while remaining above the playable threshold, although the margin is slimmer than at 1080p. Users who prioritize smoothness over visual fidelity could still choose Medium at 70.3 FPS or Low at 91 FPS, but High is the recommended maximum.

At 3840x2160, no preset reaches the 60 FPS threshold. Low settings produce 49.9 FPS, Medium yields 40.5 FPS, High delivers 32.2 FPS, and Ultra falls to 27.3 FPS. The database records no playable settings at this resolution for this combination. Users attempting to play The Technomancer at 4K would need to accept frame rates well below the playable threshold, which would result in a noticeably less smooth experience. The best settings field for 4K is recorded as null, confirming that there is no viable preset.

The Verdict

The question of whether this PC can run The Technomancer has a clear answer based on the recorded data: yes, at 1080p and 1440p, but not at 4K. The verdict by resolution provides a definitive breakdown.

At 1920x1080, the system is fully capable. The playable settings include Low, Medium, High, and Ultra. The best settings are Ultra, which achieves an average of 72.8 FPS. This exceeds the 60 FPS playable threshold by a comfortable margin. Gamers with a 1080p monitor can enable the highest preset and enjoy smooth performance.

At 2560x1440, the system remains playable but with fewer options. The playable settings are Low, Medium, and High. The best settings are High, with an average of 63.4 FPS. This is just above the 60 FPS threshold, so performance should be acceptable, but there is less headroom than at 1080p. Ultra settings at this resolution are not recommended, as they fall to 46.7 FPS.

At 3840x2160, the system cannot meet the playable threshold. The recorded data shows no playable settings, and the best settings are listed as null. The highest average frame rate at 4K is 49.9 FPS on Low settings, which is still below 60 FPS. This combination is not suitable for 4K gaming in The Technomancer.

In summary, the Intel Core i5-13400F and NVIDIA GeForce RTX 2060 SUPER combination is a solid choice for 1080p and 1440p gameplay. It delivers smooth performance at the highest presets for 1080p and at High settings for 1440p. The 4K resolution is out of reach for this pairing. The CPU is not the limiting factor; the GPU's performance ceiling defines the playable resolutions.

FAQ

Q: What is the best settings preset for 1920x1080 with this hardware?

A: The best settings preset is Ultra, which achieves an average frame rate of 72.8 FPS. This is the most demanding preset that stays at or above the 60 FPS playable threshold.

Q: Can this system run The Technomancer at 2560x1440?

A: Yes, at 2560x1440 the playable settings are Low, Medium, and High. The best settings are High with an average of 63.4 FPS. Ultra settings at this resolution drop to 46.7 FPS, which is not playable.

Q: Is 4K gaming possible with the RTX 2060 SUPER and i5-13400F?

A: No, the recorded data shows no playable settings at 3840x2160. Even Low settings only produce 49.9 FPS, which is below the 60 FPS threshold. The best settings field for 4K is recorded as null.

Q: How does the RTX 2060 SUPER compare to its nearest rivals in benchmark scores?

A: The RTX 2060 SUPER has an average benchmark score of 18093. Its nearest rivals include the NVIDIA GeForce RTX 3060 Mobile at 18159, the AMD Radeon Pro 5700 at 18189, the AMD Radeon RX 460 at 18373, and the Intel Arc A770M at 18383. The differences range from 0.4% to 1.6%.

Q: What is the average frame rate at 1920x1080 with Medium settings?

A: At 1920x1080 with Medium settings, the average frame rate is 111.1 FPS. This is well above the 60 FPS playable threshold.

Q: What is the CPU's percentile ranking among all processors in the database?

A: The Intel Core i5-13400F holds a 77th percentile ranking among all CPUs. Its average benchmark score is 25292, with the nearest rival being the AMD Ryzen 9 6900HS at 25284, a 0% delta.

How This Combo Ranks

The Intel Core i5-13400F and NVIDIA GeForce RTX 2060 SUPER combination ranks 2674 out of 3696 tested combos in The Technomancer. This places the pairing in the lower portion of the database, which aligns with the measured frame rates. The ranking reflects the GPU's limitations at higher resolutions. While the system performs admirably at 1080p and can handle 1440p at High settings, the inability to reach 60 FPS at 4K drags the overall ranking down. The CPU is a strong performer, with a 77th percentile rank among all processors, but the GPU's 62nd percentile rank among all GPUs is the deciding factor for this game's overall score. The 2674th position out of 3696 combos means that a majority of tested systems achieve better performance in The Technomancer, primarily due to more powerful graphics cards. For users targeting 1080p or 1440p gaming, this combination delivers acceptable results, but for those seeking 4K capability, a more powerful GPU would be necessary.