The Technomancer

The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 4060 delivers a playable experience in The Technomancer across most common resolutions, but the data reveals a sharp performance cliff at 4K. At 1080p and 1440p, the combo clears the 60 FPS threshold with room to spare, while 4K requires dropping to Low settings to stay fluid. The measured frame rates show a consistent pattern: this system is built for high-refresh 1080p and solid 1440p gaming, with 4K only feasible at reduced visual fidelity.

Best Settings per Resolution

At 1920x1080, the highest preset that maintains at least 60 FPS is Ultra, which achieves an average of 86.9 FPS. This is the most demanding setting tested at this resolution, and the margin above the 60 FPS threshold is substantial—roughly 27 frames of headroom. The data shows that even the heaviest preset leaves performance to spare, making this the ideal resolution for maxing out the game’s visual options.

For 2560x1440, the best settings that stay at or above 60 FPS are High, with an average of 70.6 FPS. The Ultra preset at this resolution drops to 57.4 FPS, just below the playable threshold, so High is the maximum viable option. The gap between High and Ultra here is 13.2 FPS, indicating that the transition to Ultra carries a significant cost that pushes the system under 60 FPS.

At 3840x2160, the only setting that keeps the game at or above 60 FPS is Low, which averages 62.8 FPS. The Medium preset falls to 47.1 FPS, and High drops further to 41.8 FPS, while Ultra bottoms out at 29.5 FPS. The performance scaling at 4K is steep, with Low being the sole playable configuration according to the 60 FPS threshold.

CPU and GPU Roles

The scaling between resolutions and presets indicates that the GPU is the dominant constraint in The Technomancer for this combo. At 1920x1080, dropping from Ultra to Low increases the average FPS from 86.9 to 169.4—a 94.9% improvement—which points to GPU-bound rendering under heavy settings. The CPU’s role becomes more apparent at lower settings, where the frame rate ceiling rises dramatically, but the 12600KF’s 10-core, 16-thread design with a 4.90 GHz boost clock is sufficient to feed the RTX 4060 at these levels.

Moving to 2560x1440, the same pattern holds: Low yields 111.1 FPS versus Ultra’s 57.4 FPS, a 93.5% gain from lower settings. This larger gap relative to 1080p suggests that GPU load scales with pixel count, further cementing the graphics card as the primary bottleneck. The CPU influence is visible in the fact that even at 4K Low, the system manages 62.8 FPS, indicating that the processor can maintain adequate frame pacing when the GPU is not overwhelmed.

At 3840x2160, the GPU’s dominance becomes absolute. The RTX 4060’s 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth is likely strained by 4K workloads, as evidenced by the drop from 62.8 FPS at Low to 29.5 FPS at Ultra—a 53% reduction. The CPU’s role is minimized here, as the data shows that even the lowest settings cannot push frame rates much higher, confirming that the graphics card is the limiting factor across all resolutions.

Similar Performance Alternatives

Looking at the nearest rivals for the Intel Core i5-12600KF, the AMD Ryzen 7 5800X3D has an average benchmark score of 27896, which is 0.3% higher than the i5’s 27799. This means the 5800X3D would deliver nearly identical CPU-bound performance in The Technomancer, with a negligible 0.3% advantage. The Intel Core i9-10900K scores 27872, just 0.3% higher, and the AMD Ryzen 7 6800U scores 27887, also 0.3% above, making all three chips functionally equivalent for this game. The AMD Ryzen 5 8500GE scores 27712, which is 0.3% lower, so it would perform virtually the same as well.

For the NVIDIA GeForce RTX 4060, the nearest GPU rival is the AMD Radeon HD 7790, which scores 17666 on average versus the RTX 4060’s 17639—a 0.2% difference. This is a remarkable parity, meaning the HD 7790 would produce nearly identical frame rates in The Technomancer, despite its older architecture. The AMD Radeon 780M scores 17588, 0.3% lower, and the AMD Radeon Pro 560 scores 17551, 0.5% lower, while the AMD Radeon Pro 460 scores 17509, 0.7% lower. All four GPUs fall within 0.7% of the RTX 4060’s performance, so any of them would be a close substitute in this title.

The Verdict

The data confirms that this PC can run The Technomancer, but the playable experience depends heavily on resolution. At 1920x1080, the system clears 60 FPS at every preset tested, including Ultra at 86.9 FPS, making this the most comfortable configuration. At 2560x1440, High is the best playable setting at 70.6 FPS, while Ultra falls just short at 57.4 FPS. At 3840x2160, only Low achieves 60 FPS, averaging 62.8 FPS, with Medium and above dropping below the threshold.

The verdict by resolution is clear: 1080p is fully playable at maximum settings, 1440p is playable up to High, and 4K is only playable at Low. For users targeting 1440p Ultra, the 57.4 FPS result means the system is close but not quite there, requiring a settings reduction. For 4K enthusiasts, the Low preset’s 62.8 FPS average is technically playable but leaves little headroom for demanding scenes.

Measured FPS Breakdown

At 1920x1080, the measured average FPS by settings is as follows: Low delivers 169.4 FPS, Medium provides 132.8 FPS, High reaches 109.6 FPS, and Ultra produces 86.9 FPS. The spread from Low to Ultra is 82.5 FPS, showing a wide range of performance depending on visual fidelity. No minimum or maximum FPS values were recorded, so only averages are available for analysis.

At 2560x1440, the averages are 111.1 FPS for Low, 83.6 FPS for Medium, 70.6 FPS for High, and 57.4 FPS for Ultra. The gap between Low and Ultra narrows to 53.7 FPS compared to 1080p, reflecting the increased GPU load at higher resolution. The step from High to Ultra is the largest single drop at 13.2 FPS, which is why Ultra fails to reach 60 FPS.

At 3840x2160, the averages are 62.8 FPS for Low, 47.1 FPS for Medium, 41.8 FPS for High, and 29.5 FPS for Ultra. The difference between Low and Ultra is 33.3 FPS, and even the jump from Low to Medium costs 15.7 FPS. This resolution shows the steepest performance degradation, with each preset level exacting a heavier toll on the RTX 4060.

How This Combo Ranks

In the full database of tested combinations for The Technomancer, this Intel Core i5-12600KF and NVIDIA GeForce RTX 4060 pairing ranks 1972 out of 3696 combos. This places it in the 53rd percentile of all tested systems, meaning it outperforms a slight majority of configurations but sits squarely in the middle of the pack. The rank reflects a balance: the CPU is in the 79th percentile among all processors, while the GPU is in the 61st percentile among all graphics cards, and the combined result lands near the median.

The ranking suggests that while this system is not a top-tier performer, it offers a consistent experience across the board. The 12600KF’s strong multi-threaded scores, such as 23391 in Cinebench R23 multicore, help in CPU-bound scenarios, but the RTX 4060’s mid-range standing keeps the overall combo from climbing higher. Against the 3696 total combos, being at position 1972 means there are 1724 systems that perform better and 1724 that perform worse, indicating a typical mainstream gaming setup. For The Technomancer specifically, this rank aligns with the measured FPS data, which shows solid 1080p and 1440p performance but limited 4K capability.