Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

73%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
214 FPS
Ultra 1080p Measured
169 FPS

1440p (2K / QHD)

Low 1440p Measured
186 FPS
Ultra 1440p Measured
120 FPS

4K (Ultra HD)

Low 4K Measured
129 FPS
Ultra 4K Measured
66 FPS
5.4ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 17,177
Graphics Card
Required 27,947
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 66 85 99 129
1440p QHD 120 154 169 186
1080p Full HD 169 184 195 214

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 184
1920x1080 Low 214
1920x1080 Medium 195
1920x1080 Ultra 169
2560x1440 High 154
2560x1440 Low 186
2560x1440 Medium 169
2560x1440 Ultra 120
3840x2160 High 85
3840x2160 Low 129
3840x2160 Medium 99
3840x2160 Ultra 66

Performance Analysis: The Technomancer on Your System

Similar Performance Alternatives

The Intel Core i5-11400F sits in a crowded performance band according to the database. Its average benchmark score of 17,177 places it within 0.6% of several competing processors. The AMD EPYC 7H12, a server-class chip, scores 17,120, which is just 0.3% behind the i5-11400F. The Intel Core i5-12450H, a mobile processor, scores 17,239, putting it 0.4% ahead. The AMD Ryzen 3 PRO 8300G scores 17,278, 0.6% ahead of the i5-11400F. Finally, the Intel Core Ultra 7 164U scores 17,074, 0.6% behind. These deltas are all within a single percentage point, so any of these CPUs would deliver nearly identical frame pacing in CPU-bound scenarios. The i5-11400F ranks in the 71st percentile among all CPUs, meaning it outperforms roughly seven out of every ten processors in the database.

On the graphics side, the NVIDIA GeForce RTX 5090 D holds an average benchmark score of 77,712, placing it in the 92nd percentile among all GPUs. Its nearest rivals are surprisingly not other flagship desktop cards. The AMD Radeon RX 6650M XT scores 76,904, just 1.1% behind. The AMD Radeon RX 6850M XT scores 78,940, 1.6% ahead. Two NVIDIA Tesla P100 variants, one with 12 GB and one with 16 GB, score 79,396 and 79,605 respectively, sitting 2.1% and 2.4% ahead. The closeness of these scores suggests that in synthetic benchmarks, the RTX 5090 D behaves like a high-end mobile GPU or a compute-oriented data center card rather than clearly distancing itself from them. For The Technomancer, a game from 2016, this level of GPU performance is far beyond what the title demands, so the practical differences between the RTX 5090 D and its nearest rivals would likely be invisible in actual gameplay.

CPU and GPU Roles

The Technomancer is an Action RPG that launched in 2016, and the recorded data shows a clear pattern of GPU scaling across resolutions. At 1920x1080 with Low settings, the combo achieves 214 FPS on average. Moving to 2560x1440 Low, the average drops to 186 FPS, a 13% reduction. At 3840x2160 Low, the average falls to 129 FPS, another 31% drop from the 1440p result. This steep decline as resolution increases points to the GPU becoming the dominant factor at higher pixel counts. The RTX 5090 D, despite its enormous compute resources, still has to fill more pixels at 4K, and the frame rate reflects that workload.

The CPU's role is more visible at lower resolutions where the GPU has less work per frame. At 1080p, the difference between Low and Ultra settings is 214 FPS versus 169 FPS, a 21% spread. At 1440p, the same settings span 186 FPS down to 120 FPS, a 35% spread. At 4K, Low hits 129 FPS while Ultra drops to 66 FPS, a 49% spread. The widening gap between presets as resolution increases suggests that the GPU is being stressed more heavily by higher quality settings at 4K, while at 1080p the CPU is more likely to cap performance. The i5-11400F, with its 6 cores and 12 threads boosting up to 4.40 GHz, appears sufficient to keep the RTX 5090 D fed at 1080p, since the frame rates there are extremely high. At 4K Ultra, the 66 FPS average indicates the GPU is the limiting factor, as the CPU would have far less trouble maintaining that level of throughput.

The scaling between Medium settings across resolutions reinforces this interpretation. At 1080p Medium, the average is 195 FPS. At 1440p Medium, it is 169 FPS. At 4K Medium, it drops to 99 FPS. Each resolution step roughly halves the pixel count difference, and the frame rate responds accordingly. The data suggests that for this game, the RTX 5090 D is the primary driver of performance differences across resolutions, while the i5-11400F provides enough headroom to avoid becoming a bottleneck at any tested setting.

Measured FPS Breakdown

The database contains measured frame rates for twelve combinations of resolution and settings. Min and max values are only recorded for Medium settings, so the analysis of frame time consistency relies on those entries.

At 1920x1080, the Low preset averages 214 FPS. High averages 184 FPS. Medium averages 195 FPS with a minimum of 166 FPS and a maximum of 224 FPS. Ultra averages 169 FPS. The Medium preset's minimum of 166 FPS is still far above the 60 FPS playability threshold, and the 58 FPS spread between min and max indicates some variation but nothing that would cause visible stuttering on a standard 60 Hz or 144 Hz display.

At 2560x1440, Low averages 186 FPS. High averages 154 FPS. Medium averages 169 FPS with a minimum of 144 FPS and a maximum of 194 FPS. Ultra averages 120 FPS. The Medium preset at 1440p shows a 50 FPS spread between min and max, with the minimum still at 144 FPS, which is comfortably above 60 FPS.

At 3840x2160, Low averages 129 FPS. High averages 85 FPS. Medium averages 99 FPS with a minimum of 84 FPS and a maximum of 114 FPS. Ultra averages 66 FPS. The Medium preset at 4K has a 30 FPS spread, and the minimum of 84 FPS remains above the playability threshold. Ultra at 4K dips to 66 FPS on average, which is still above 60 FPS but with no recorded minimum to confirm worst-case behavior.

The ordering of presets by average FPS is not strictly monotonic at every resolution. At 1080p, Medium (195 FPS) outperforms High (184 FPS), and at 1440p, Medium (169 FPS) also beats High (154 FPS). At 4K, the same pattern holds: Medium at 99 FPS versus High at 85 FPS. This suggests that the High preset may apply certain effects that are more demanding than Medium, or that the game's settings hierarchy does not map linearly to performance cost. The data consistently shows Medium delivering higher averages than High across all three resolutions, which is an unusual but repeatable result.

The Verdict

The verdict is unambiguous: this PC runs The Technomancer at or above 60 FPS at every resolution and preset combination recorded in the database. At 1920x1080, the Ultra preset averages 169 FPS, and the minimum recorded value across all settings is 166 FPS from the Medium preset. At 2560x1440, Ultra averages 120 FPS, and the lowest minimum recorded is 144 FPS from Medium. At 3840x2160, the most demanding setting, Ultra, averages 66 FPS, which clears the 60 FPS threshold with a small margin. The 4K Medium preset averages 99 FPS with a minimum of 84 FPS, so even the worst recorded frame time at 4K stays well above the playability line.

The database lists all four settings (Low, Medium, High, Ultra) as playable at every resolution. The best settings at each resolution are Ultra, with average frame rates of 169 FPS at 1080p, 120 FPS at 1440p, and 66 FPS at 4K. For a game released in 2016, this hardware combination provides massive headroom. Players targeting 60 FPS can enable maximum settings at any resolution without concern. Those with high refresh rate displays at 1080p or 1440p can also take advantage of the high averages, since even the Ultra preset at 1440p stays at 120 FPS.

How This Combo Ranks

The combination of the Intel Core i5-11400F and the NVIDIA GeForce RTX 5090 D ranks 209th out of 3,696 tested combos in The Technomancer. This places it in the top 5.7% of all configurations in the database for this game. The rank reflects the overall performance of the pair, not just the GPU or CPU individually. Given that the RTX 5090 D alone sits in the 92nd percentile of all GPUs, the combo's rank slightly below that level likely reflects the i5-11400F's more modest 71st percentile CPU standing. The game's age and relatively low system requirements mean that even mid-range CPUs can keep up, so the GPU's dominance in the ranking makes sense.

The interpretation of this rank depends on context. There are 3,487 combos ranked below this one, so the vast majority of tested systems deliver lower performance in The Technomancer. The 208 combos ranked above it presumably pair even stronger CPUs with the RTX 5090 D or similar high-end graphics cards. For practical purposes, the difference between rank 209 and rank 1 in this particular game is unlikely to be perceptible, since the frame rates are already far beyond display refresh rate capabilities at most settings.

FAQ

Q: Can this PC run The Technomancer at 4K with maximum settings?

A: Yes. At 3840x2160 with Ultra settings, the combo averages 66 FPS, which is above the 60 FPS playability threshold.

Q: Which resolution provides the highest average frame rate?

A: 1920x1080 with Low settings delivers the highest recorded average at 214 FPS.

Q: How much faster is the RTX 5090 D compared to its closest rival?

A: The RTX 5090 D's average benchmark score is 77,712. The AMD Radeon RX 6650M XT scores 76,904, which is 1.1% behind. The AMD Radeon RX 6850M XT scores 78,940, which is 1.6% ahead.

Q: Does the Medium preset ever outperform the High preset?

A: Yes. At 1080p, Medium averages 195 FPS versus 184 FPS for High. At 1440p, Medium averages 169 FPS versus 154 FPS for High. At 4K, Medium averages 99 FPS versus 85 FPS for High.

Q: What is the lowest recorded minimum frame rate across all tests?

A: The lowest minimum is 84 FPS, recorded at 3840x2160 with Medium settings. This is still well above the 60 FPS threshold.

Q: How does this CPU compare to the AMD EPYC 7H12?

A: The Intel Core i5-11400F scores 17,177 on average, while the AMD EPYC 7H12 scores 17,120, a difference of 0.3%. They are effectively equivalent in synthetic benchmarks.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 169 FPS. The minimum recorded value at this resolution comes from Medium at 166 FPS, so even the lowest measured frame time is far above the threshold.

At 2560x1440, Ultra is again the best choice, averaging 120 FPS. The Medium preset's minimum of 144 FPS provides additional confidence in frame time consistency, but Ultra's average leaves ample room above 60 FPS.

At 3840x2160, Ultra remains viable, averaging 66 FPS. This is the tightest margin in the entire dataset, with only 6 FPS of headroom above the playability threshold. Players who prefer a larger safety margin could choose Medium instead, which averages 99 FPS and has a recorded minimum of 84 FPS. The database lists Ultra as the best setting at 4K, and the 66 FPS average confirms it clears the bar, but the absence of a recorded minimum for Ultra means the worst-case frame time is unknown. For competitive or highly sensitive play, Medium offers a more comfortable buffer.