Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 42 | 50 | 65 |
| 1440p QHD | 60 | 77 | 90 | 118 |
| 1080p Full HD | 92 | 118 | 138 | 180 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The Intel Core i5-11400F paired with the NVIDIA GeForce RTX 5060 is a desktop configuration that has been measured across The Technomancer at three resolutions and four quality presets. The recorded data provides a clear picture of playability, with the 60 FPS threshold as the reference point.
Measured FPS Breakdown
The benchmark results for The Technomancer are consistent across the tested resolutions, with the expected scaling from 1080p upward. At 1920x1080, the Low preset averages 180 FPS, while Medium averages 138 FPS with a minimum of 117 and a maximum of 159. High averages 118 FPS, and Ultra averages 92 FPS. All 1080p presets remain far above the 60 FPS playability threshold, with even the most demanding setting nearly 50% higher than the threshold.
At 2560x1440, the Low preset drops to 118 FPS, Medium to 90 FPS (with a minimum of 77 and maximum of 104), High to 77 FPS, and Ultra to exactly 60 FPS. The 1440p Ultra result is notable because it sits precisely on the playability line, meaning the configuration delivers a stable 60 FPS average at the highest visual quality. The minimum recorded value for Medium at 1440p is 77 FPS, which indicates that even the low-end frame rate remains above the threshold.
At 3840x2160, the situation changes dramatically. Low averages 65 FPS, which is the only preset that clears the 60 FPS bar. Medium averages 50 FPS with a minimum of 42 and maximum of 57, High averages 42 FPS, and Ultra averages 33 FPS. The gap between Low and Ultra at 4K is nearly a 50% reduction in average frame rate, from 65 to 33 FPS. The minimum recorded value for Medium at 4K, 42 FPS, is well below the playable threshold, confirming that 4K gaming requires the Low preset to maintain a consistent experience.
Similar Performance Alternatives
The CPU and GPU each have a set of nearest rivals in the database, based on average benchmark scores. For the Intel Core i5-11400F, the average benchmark score is 17177. The closest rival is the AMD EPYC 7H12 with an average score of 17120, a delta of 0.3% (the i5-11400F is 0.3% faster). The Intel Core i5-12450H scores 17239, making it 0.4% faster than the i5-11400F. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% faster, and the Intel Core Ultra 7 164U scores 17074, 0.6% slower. These deltas are all within 1%, meaning any of these CPUs would deliver nearly identical performance in The Technomancer, assuming the GPU remains the same.
For the NVIDIA GeForce RTX 5060, the average benchmark score is 26331. The nearest rival, the AMD Radeon 860M, scores 26401, which is 0.3% faster than the RTX 5060. The NVIDIA GeForce MX550 scores 26421, also 0.3% faster. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, 0.8% faster, while the AMD Radeon RX 6750 XT scores 26011, which is 1.2% slower than the RTX 5060. These small deltas indicate that swapping the RTX 5060 for any of these rivals would produce frame rates within a few percent of the measured results, all else being equal.
CPU and GPU Roles
The scaling of frame rates across resolutions and presets reveals how the CPU and GPU each contribute to performance in The Technomancer. At 1920x1080 with the Low preset, the average is 180 FPS, which is extremely high and suggests that the CPU is not the limiting factor at this resolution. The i5-11400F has 6 cores and 12 threads, and its single-thread performance, as measured by Cinebench R23, is 2024 points. This is sufficient to feed the RTX 5060 at 1080p, even at high frame rates.
As resolution increases to 2560x1440, the GPU begins to take on more load. The Low preset drops from 180 to 118 FPS, a 34% reduction, while the CPU remains the same. At 3840x2160, the Low preset falls to 65 FPS, a further 45% reduction from 1440p. This pattern is consistent with the GPU becoming the primary bottleneck at higher resolutions. The RTX 5060 has 8 GB of GDDR7 memory and a 128-bit memory bus, and its performance scales with the pixel workload.
Preset scaling also shows the GPU's role. At 1080p, moving from Low to Ultra reduces the average from 180 to 92 FPS, a 49% drop. At 4K, the same preset change reduces the average from 65 to 33 FPS, also a 49% drop. This proportional reduction across resolutions indicates that the GPU is the dominant factor when raising visual quality, while the CPU's contribution remains relatively constant. The CPU's percentile ranking among all tested CPUs is 71, and the GPU's is 72, suggesting a balanced pairing for this game.
How This Combo Ranks
Among all tested CPU and GPU combinations in the database, this specific pairing ranks 1648th out of 3696 combos. That places it in the upper half of all configurations, meaning it outperforms a majority of tested systems. The rank reflects the combined capability of the i5-11400F and RTX 5060, and the measured FPS data in The Technomancer aligns with this mid-to-upper tier position. The CPU's average benchmark score of 17177 and the GPU's average of 26331 both sit near the 71st and 72nd percentiles respectively, which corroborates the combo rank.
FAQ
Q: What is the maximum playable preset at 3840x2160?
A: The Low preset is the only one that stays at or above 60 FPS, averaging 65 FPS. Medium averages 50 FPS, High 42 FPS, and Ultra 33 FPS, all below the threshold.
Q: Can this PC run The Technomancer at 2560x1440 with Ultra settings?
A: Yes, the Ultra preset at 1440p averages exactly 60 FPS, meeting the playability threshold. All other presets at this resolution also clear 60 FPS.
Q: How does the RTX 5060 compare to the AMD Radeon RX 6750 XT?
A: The RTX 5060 is 1.2% faster in average benchmark score (26331 versus 26011). This is a small difference, so in-game performance would be very similar.
Q: What is the CPU's single-thread performance in Cinebench R23?
A: The Intel Core i5-11400F scores 2024 points in Cinebench R23 single-core, which is a strong result for a desktop processor from its generation.
Q: At 1920x1080 High, what average FPS can be expected?
A: The measured average is 118 FPS, well above the 60 FPS threshold, providing a smooth experience.
Q: Does the game become more GPU-bound at higher resolutions?
A: Yes. The frame rate drops from 180 FPS at 1080p Low to 65 FPS at 4K Low, a 64% reduction, while the CPU workload remains constant. This indicates the GPU is the limiting factor at higher resolutions.
Best Settings per Resolution
For each resolution, the most demanding preset that maintains an average of at least 60 FPS is as follows:
- 3840x2160: Low preset, with an average of 65 FPS. Medium, High, and Ultra all fall below 60 FPS.
- 2560x1440: Ultra preset, with an average of exactly 60 FPS. This is the highest quality option that remains playable.
- 1920x1080: Ultra preset, with an average of 92 FPS. All presets at 1080p exceed 60 FPS, so the maximum quality is fully playable.
The Verdict
The Intel Core i5-11400F with the NVIDIA GeForce RTX 5060 can run The Technomancer, but the playable experience depends heavily on resolution. At 1920x1080, every preset clears the 60 FPS threshold, with Ultra averaging 92 FPS. At 2560x1440, Ultra averages exactly 60 FPS, and all lower presets are also playable. At 3840x2160, only the Low preset achieves an average of 65 FPS; Medium, High, and Ultra all fall below 60 FPS. Therefore, this configuration is suitable for 1080p and 1440p gaming at maximum settings, while 4K gaming requires a significant reduction in visual quality to maintain a playable frame rate.