Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

56%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
158 FPS
Ultra 1080p Measured
81 FPS

1440p (2K / QHD)

Low 1440p Measured
102 FPS
Ultra 1440p Measured
53 FPS

4K (Ultra HD)

Low 4K Measured
55 FPS
Ultra 4K Measured
27 FPS
9.7ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 17,177
Graphics Card
Required 27,947
Your GPU 20,282

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 38 41 55
1440p QHD 53 65 81 102
1080p Full HD 81 103 123 158

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 103
1920x1080 Low 158
1920x1080 Medium 123
1920x1080 Ultra 81
2560x1440 High 65
2560x1440 Low 102
2560x1440 Medium 81
2560x1440 Ultra 53
3840x2160 High 38
3840x2160 Low 55
3840x2160 Medium 41
3840x2160 Ultra 27

Performance Analysis: The Technomancer on Your System

Best Settings per Resolution

The Technomancer presents a clear scaling pattern across resolutions for the Intel Core i5-11400F with the NVIDIA GeForce RTX 2070 SUPER. The recorded data shows that the most demanding preset which maintains at least 60 FPS varies by resolution, and the headroom available at lower resolutions is substantial.

At 3840x2160, no preset reaches the 60 FPS playable threshold. The best recorded average is 55.3 FPS on Low settings, which falls short of the playable threshold. High settings produce 38.4 FPS, Medium delivers 41.3 FPS, and Ultra drops to 27.4 FPS. There is no best settings recommendation for this resolution because every preset misses the 60 FPS target.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is High, with an average of 64.9 FPS. Medium delivers 81.3 FPS, and Low reaches 102.1 FPS. Ultra falls below the threshold at 53.2 FPS. The data indicates that High is the optimal choice for visual quality while retaining playable performance at this resolution.

At 1920x1080, even the Ultra preset clears the 60 FPS threshold with an average of 81.2 FPS. High runs at 103.4 FPS, Medium at 122.6 FPS, and Low at 157.7 FPS. Since Ultra is the most demanding preset and it remains comfortably above 60 FPS, it is the recommended setting for this resolution. The margin of 21.2 FPS above the playable threshold means there is no need to compromise visual fidelity at 1080p.

The progression across resolutions shows that this combination loses roughly 40% of its 1080p Ultra performance when moving to 1440p Ultra, and the 4K results indicate the GPU is the limiting factor at higher pixel counts.

FAQ

Q: Is the Intel Core i5-11400F and RTX 2070 SUPER combination capable of running The Technomancer at 4K?

A: No. At 3840x2160, the highest recorded average FPS is 55.3 on Low settings, which is below the 60 FPS playable threshold. High averages 38.4 FPS, Medium 41.3 FPS, and Ultra 27.4 FPS. No preset at this resolution is playable.

Q: What is the best settings preset at 1440p for this hardware?

A: High is the best playable preset at 2560x1440, averaging 64.9 FPS. It is the most demanding setting that stays above the 60 FPS threshold. Ultra falls below at 53.2 FPS, while Medium and Low run at 81.3 FPS and 102.1 FPS respectively.

Q: Can this PC run The Technomancer at 1080p with Ultra settings?

A: Yes. At 1920x1080, Ultra averages 81.2 FPS, which is well above the 60 FPS playable threshold. The other presets all exceed this threshold as well: High at 103.4 FPS, Medium at 122.6 FPS, and Low at 157.7 FPS.

Q: How much performance is lost when moving from 1080p to 1440p at High settings?

A: At 1080p High, the average is 103.4 FPS. At 1440p High, the average is 64.9 FPS. This represents a drop of 38.5 FPS, or approximately 37% lower performance when scaling up to 1440p.

Q: Which component is more likely to bottleneck at 4K?

A: The benchmark results indicate the GPU is the limiting factor at 3840x2160. The average FPS drops to 38.4 at High and 27.4 at Ultra, showing that the rendering load at this resolution exceeds what the RTX 2070 SUPER can deliver. The CPU's performance headroom is not the constraint at this resolution.

Q: Does the RTX 2070 SUPER outperform its nearest rivals in this game's context?

A: The GPU's average benchmark score is 20282, which places it slightly below its nearest rivals. The NVIDIA Quadro M4000M scores 20480 (1% higher), the RTX 3070 Mobile scores 20534 (1.2% higher), the Intel Arc B570 scores 20556 (1.3% higher), and the Intel Arc A750 scores 20582 (1.5% higher). The differences are minor, within 1.5% overall.

Similar Performance Alternatives

The database places the Intel Core i5-11400F at the 71st percentile among all CPUs with an average benchmark score of 17177. Its nearest rivals show very close aggregate performance. The AMD EPYC 7H12 scores 17120, which is 0.3% lower than the i5-11400F. The Intel Core i5-12450H scores 17239, 0.4% higher. The AMD Ryzen 3 PRO 8300G scores 17278, 0.6% higher. The Intel Core Ultra 7 164U scores 17074, 0.6% lower. In practical terms, any of these processors would deliver nearly identical frame pacing in The Technomancer, since the deltas are all within a fraction of a percent.

The NVIDIA GeForce RTX 2070 SUPER holds the 65th percentile among all GPUs with an average benchmark score of 20282. Its nearest rivals cluster tightly around this figure. The NVIDIA Quadro M4000M is 1% higher at 20480. The NVIDIA GeForce RTX 3070 Mobile is 1.2% higher at 20534. The Intel Arc B570 is 1.3% higher at 20556. The Intel Arc A750 is 1.5% higher at 20582. None of these alternatives would change the playability verdict for The Technomancer at any resolution. The 1.5% maximum delta translates to roughly 1 to 2 FPS at 1440p High and less than 3 FPS at 1080p Ultra.

For a user considering alternatives to this specific pairing, swapping the CPU for any of the listed rivals would produce essentially identical results in this game. Similarly, substituting the GPU with any of its nearest rivals would not push 4K into playable territory, nor would it threaten the 1080p Ultra result.

The Verdict

The Intel Core i5-11400F and NVIDIA GeForce RTX 2070 SUPER combination delivers playable performance in The Technomancer at 1080p and 1440p, but not at 4K.

At 1920x1080, all four presets clear the 60 FPS playable threshold. Ultra runs at 81.2 FPS, High at 103.4 FPS, Medium at 122.6 FPS, and Low at 157.7 FPS. This is a fully playable experience at maximum settings with comfortable headroom above the threshold.

At 2560x1440, three of four presets are playable. High is the best playable setting at 64.9 FPS, with Medium at 81.3 FPS and Low at 102.1 FPS. Ultra dips to 53.2 FPS, which is below the 60 FPS threshold. Users at this resolution should select High for the best balance of visual quality and playability.

At 3840x2160, no preset reaches the playable threshold. Low averages 55.3 FPS, Medium 41.3 FPS, High 38.4 FPS, and Ultra 27.4 FPS. This combination cannot deliver a consistent 60 FPS experience at 4K in this game.

The verdict is straightforward: this system runs The Technomancer well at 1080p and 1440p, with the caveat that 1440p Ultra is not achievable. 4K is not viable at any settings.

Measured FPS Breakdown

The recorded measurements provide average FPS values for each resolution and preset combination. Minimum and maximum FPS were not recorded in the database, so the analysis relies on average performance.

At 3840x2160, the results are as follows. Low settings average 55.3 FPS. Medium settings average 41.3 FPS. High settings average 38.4 FPS. Ultra settings average 27.4 FPS. The spread from Low to Ultra is 27.9 FPS, with each step up in quality costing a meaningful amount of performance.

At 2560x1440, the results improve considerably. Low settings average 102.1 FPS. Medium settings average 81.3 FPS. High settings average 64.9 FPS. Ultra settings average 53.2 FPS. The gap between Low and Ultra is 48.9 FPS, and the step from High to Ultra is the largest single drop at 11.7 FPS.

At 1920x1080, the results show substantial headroom. Low settings average 157.7 FPS. Medium settings average 122.6 FPS. High settings average 103.4 FPS. Ultra settings average 81.2 FPS. The difference between Low and Ultra is 76.5 FPS, and even the most demanding preset remains far above the playable threshold.

The scaling between presets is consistent across resolutions. Moving from Low to Medium costs roughly 20% to 25% of the Low value at each resolution. Moving from Medium to High costs another 20% percent, and moving from High to Ultra costs approximately 20% to 22%. This suggests the game has a well-behaved settings scaling curve without any anomalous jumps.

How This Combo Ranks

The database ranks this specific CPU and GPU combination at position 2135 out of 3696 tested combinations for The Technomancer. This places it in the upper-middle portion of all tested systems, at roughly the 58th percentile of tested combinations.

This ranking reflects the combination's ability to handle the game at 1080p and 1440p but not at 4K. The 3696 total combinations include systems with both stronger and weaker hardware, and the rank of 2135 indicates that a majority of tested systems are less capable in this game, while a substantial minority are more capable.

The ranking is consistent with the measured results. A system that can run Ultra at 1080p at 81.2 FPS and High at 1440p at 64.9 FPS, but cannot reach 60 FPS at 4K on any preset, would naturally fall in the middle of the distribution. Systems ranked higher would typically offer playable 4K performance, while those ranked lower would struggle at 1440p or even 1080p.

The gap between this combination and the top of the ranking is driven primarily by 4K performance. At 1080p and 1440p, the results are solid, but the inability to reach playable frame rates at 3840x2160 prevents a higher overall rank.

CPU and GPU Roles

The division of labor between the Intel Core i5-11400F and the NVIDIA GeForce RTX 2070 SUPER in The Technomancer changes with resolution and preset selection.

The CPU's benchmark profile shows strong multi-threaded performance. Its Cinebench R23 multi-core score is 14340, and its single-core score is 2024. The PassMark multithread score is 16908, with a single-thread score of 2981. These figures indicate that the i5-11400F has ample processing headroom for this 2016 title, which does not demand particularly high core counts or thread counts.

The GPU's benchmark profile shows moderate performance relative to current hardware. Its PassMark G3D score is 18169, and its DirectX 11 score is 151. The Technomancer, given its release date, relies primarily on DirectX 11 rendering, which aligns with the GPU's strengths.

At 1920x1080, the results suggest the GPU is the primary determinant of performance. The scaling from Low at 157.7 FPS to Ultra at 81.2 FPS shows that the GPU's rendering load increases significantly with each preset tier. The CPU has enough headroom at this resolution to feed the GPU without becoming a bottleneck, as evidenced by the high Low preset frame rate.

At 2560x1440, the GPU's role becomes more pronounced. The average FPS at each preset drops in proportion to the increased pixel count. Low falls from 157.7 to 102.1 FPS, a 35% reduction. Ultra falls from 81.2 to 53.2 FPS, a 34.5% reduction. This consistent scaling indicates that the GPU is handling the additional pixel workload, and the CPU is not constraining performance.

At 3840x2160, the GPU is clearly the limiting factor. The Low preset only reaches 55.3 FPS, which is below the playable threshold. This is a dramatic drop from the 102.1 FPS at 1440p Low, representing a 45.9% reduction. The Ultra preset drops to 27.4 FPS, which is roughly half of the 1440p Ultra value of 53.2 FPS. These reductions are consistent with the increased pixel count at 4K, confirming that the RTX 2070 SUPER cannot sustain playable frame rates at this resolution regardless of CPU capability.

The CPU's influence is more visible when comparing preset scaling at a fixed resolution. At 1080p, the difference between Low and Ultra is 76.5 FPS. At 1440p, the difference is 48.9 FPS. At 4K, the difference is 27.9 FPS. As resolution increases, the absolute FPS spread between presets narrows, which is typical when the GPU becomes the dominant constraint.

For this game, the data indicates that the RTX 2070 SUPER is the component that determines playability at all resolutions. The i5-11400F provides sufficient processing power to avoid bottlenecking the GPU even at 1080p Low, where the game runs at 157.7 FPS. Users considering upgrades for this title should focus on the GPU, since the CPU already demonstrates adequate headroom.