The Technomancer

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 5070 delivers a thoroughly capable 1080p and 1440p experience in The Technomancer, with 4K playable at reduced settings. Benchmark data shows this combo ranks 683rd out of 3696 tested configurations, placing it in the top 18.5% of all tested systems for this title. The measured results confirm that the GPU is the dominant performance driver at higher resolutions, while the quad-core processor keeps pace adequately at lower settings where frame rates climb well past 200 FPS.

Measured FPS Breakdown

The measured frame rate data for this combination covers three resolutions and four quality presets, with average FPS values provided for each configuration. No minimum or maximum frame rate data was recorded, so the analysis relies on average performance figures.

At 1920x1080, the combo produces exceptional results across all settings. Low settings deliver an average of 246 FPS, Medium settings hit 195.9 FPS, High settings reach 165.4 FPS, and Ultra settings still maintain a very strong 130.4 FPS average. The scaling from Low to Ultra shows a 47% performance drop, which is typical for a GPU-bound scenario where the RTX 5070's raw throughput gets increasingly taxed by higher quality presets.

Moving to 2560x1440, the frame rates remain highly playable but show the expected resolution penalty. Low settings average 163.7 FPS, Medium averages 125 FPS, High averages 109.7 FPS, and Ultra drops to 83.8 FPS. The gap between 1080p and 1440p at the same settings is roughly 33-36%, which aligns with the additional pixel workload. Even at the most demanding 1440p preset, the system stays well above the 60 FPS playable threshold.

At 3840x2160, the RTX 5070 starts to feel the strain of 4K rendering. Low settings average 87.5 FPS, Medium averages 66.4 FPS, and High averages 61.9 FPS. Ultra settings fall below the playable threshold at 47.6 FPS average, meaning this preset fails the 60 FPS requirement. The resolution scaling from 1440p to 4K at the same preset shows a 44-47% drop in frame rate, consistent with the 2.25x pixel count increase.

The data reveals a clear pattern: the RTX 5070 provides massive headroom at 1080p, comfortable performance at 1440p, and just barely misses the 60 FPS target only at 4K Ultra. The lack of min/max data means the analysis cannot address frame pacing or stutter concerns, but the average values indicate a smooth experience across all playable configurations.

CPU and GPU Roles

The performance scaling between resolutions and presets makes it clear that the GPU is the primary bottleneck for this game as resolution increases, while the CPU's role becomes more pronounced at lower resolutions and higher frame rates.

At 1080p, the delta between Low and Ultra presets is 115.6 FPS (from 246 to 130.4 FPS). This substantial gap indicates that the RTX 5070's rendering workload scales heavily with quality settings, but the fact that the i3-12100F can push 246 FPS on Low suggests the processor is not limiting the GPU in this range. The 47% performance reduction from Low to Ultra is characteristic of GPU-side cost increases from shadow quality, post-processing, and texture filtering.

The 1440p results show a similar pattern with a 79.9 FPS gap between Low and Ultra (163.7 to 83.8 FPS). The proportional drop is comparable to 1080p, indicating that both CPU and GPU workloads scale predictably with resolution. The fact that 1440p Ultra still averages 83.8 FPS — well above the playable threshold — suggests the combo has balanced capabilities for this resolution.

At 4K, the preset scaling becomes the most telling. The difference between Low and Ultra is 39.9 FPS (87.5 to 47.6 FPS), and critically, Ultra drops below the 60 FPS threshold. This is a clear sign that the GPU becomes the dominant constraint at this resolution — the i3-12100F's four cores and eight threads are sufficient to feed the RTX 5070, but the GPU cannot maintain playable frame rates at the highest quality setting.

The CPU's significance is further underscored by the 1080p Low result of 246 FPS. This frame rate is high enough that the processor's single-thread performance (3dmark single-thread score of 893, Cinebench R23 single-core score of 1674) becomes a relevant factor. However, since the game is an Action RPG from 2016, the i3-12100F's modern Alder Lake architecture handles the workload without becoming a limiting factor at any measured configuration.

FAQ

Q: Can this combo run The Technomancer at 4K Ultra settings?

A: No. The measured average FPS at 3840x2160 with Ultra settings is 47.6 FPS, which falls below the 60 FPS playable threshold. The playable 4K settings are High, Low, and Medium, with High being the best playable preset at 61.9 FPS average.

Q: What is the best settings preset for 1440p gaming?

A: Ultra settings at 2560x1440 produce an average of 83.8 FPS, which is both above the 60 FPS threshold and the highest quality preset that remains playable. All four presets (Low, Medium, High, Ultra) are playable at this resolution.

Q: How does the i3-12100F compare to its nearest CPU rivals in synthetic benchmarks?

A: The i3-12100F has an average benchmark score of 13494, placing it at the 68th percentile of all CPUs. It performs nearly identically to the Intel Core 3 N355 (13492, 0% delta) and the Intel Core i5-9500 (13452, 0.3% ahead). The Core 5 120UL scores 13594 (0.7% higher) and the Core i7-1250U scores 13351 (1.1% lower).

Q: Is the RTX 5070's synthetic benchmark performance competitive with its nearest rivals?

A: Yes. The RTX 5070 averages 40377 in benchmark scores, ranking at the 82nd percentile of all GPUs. The AMD Radeon Pro 580 scores 40318 (0.1% lower), the AMD Radeon Pro WX 7100 scores 40063 (0.8% lower), and the AMD Radeon Pro 5300 scores 40870 (1.2% higher). The NVIDIA RTX A500 Mobile scores 39568 (2% lower).

Q: What frame rate can I expect at 1080p with High settings?

A: The measured average FPS at 1920x1080 with High settings is 165.4 FPS. This is well above the 60 FPS playable threshold, and even Ultra settings at this resolution maintain 130.4 FPS average.

Q: Does the RTX 5070's 12GB memory capacity affect performance at 4K?

A: The memory configuration includes 12GB of GDDR7 with a 192-bit bus and 672.0 GB/s bandwidth. Given that High settings at 4K achieve 61.9 FPS, the memory subsystem is adequate for this title at playable settings. Ultra at 4K fails to hit 60 FPS, but this is due to overall GPU rendering load rather than a specific memory limitation based on the available data.

Similar Performance Alternatives

For the CPU side, the Intel Core i3-12100F's nearest rivals in synthetic benchmark performance provide useful comparisons for builders considering alternative processors. The Intel Core 3 N355 matches the i3-12100F almost exactly with an average score of 13492 versus 13494, a 0% delta. The Intel Core i5-9500 scores 13452, putting it just 0.3% behind. The Intel Core 5 120UL is the strongest of the group at 13594, which is 0.7% ahead. The Intel Core i7-1250U trails at 13351, a 1.1% gap. All four alternatives would deliver nearly identical CPU-bound performance in The Technomancer, though the i3-12100F's socket and platform features differ from these rivals.

On the GPU side, the RTX 5070's nearest rivals in average benchmark score are all AMD professional cards, which is notable given the gaming focus of this title. The AMD Radeon Pro 580 scores 40318, just 0.1% behind the RTX 5070's 40377. The AMD Radeon Pro WX 7100 scores 40063, a 0.8% deficit. The AMD Radeon Pro 5300 scores 40870, which is 1.2% higher. The NVIDIA RTX A500 Mobile scores 39568, a 2% gap. Builders considering a switch to any of these GPUs would see very similar raw benchmark performance, but the RTX 5070's 12GB GDDR7 memory and 672.0 GB/s bandwidth are significantly different from what these professional cards offer, which could affect real-world gaming results beyond synthetic scores.

In practical terms, swapping the i3-12100F for any of its four nearest rivals would produce negligible FPS changes in The Technomancer, since the game at 1440p and 4K is clearly GPU-bound. Swapping the RTX 5070 for a Radeon Pro card would likely reduce actual gaming frame rates despite similar synthetic scores, because those cards are not designed for gaming workloads. The safest alternative paths would be a comparable GeForce card or accepting the RTX 5070's actual measured performance as the baseline.

How This Combo Ranks

The combo of the Intel Core i3-12100F and NVIDIA GeForce RTX 5070 ranks 683rd out of 3696 tested combinations in The Technomancer. This places the system in the top 18.5% of all tested configurations, which is a strong result given the game's 2016 release date and the relatively modest CPU paired with a high-end GPU.

The rank reflects the balance between the i3-12100F's 68th percentile CPU score and the RTX 5070's 82nd percentile GPU score. The combination outperforms what the CPU alone would suggest, because the game's performance at higher resolutions is dominated by GPU throughput. At 1080p, where CPU load is higher, the rank might be less favorable than at 1440p or 4K, but the measured frame rates at 1080p are still excellent.

The 3696-combo pool includes a wide range of hardware configurations, so a 683rd rank indicates that this pairing delivers better performance than roughly 81.5% of all tested systems. This is a strong showing for a CPU that costs $97 at launch paired with a GPU that costs $549 USD at launch. The combo punches above its component-level percentiles in this specific game, which is a practical result for builders targeting The Technomancer at high refresh rates.

The Verdict

This system can run The Technomancer at playable frame rates in nearly every configuration tested. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with the best playable setting being Ultra at 130.4 FPS average. At 2560x1440, all four presets also remain playable, with Ultra achieving 83.8 FPS average. At 3840x2160, three of the four presets are playable — High at 61.9 FPS, Low at 87.5 FPS, and Medium at 66.4 FPS — but Ultra falls short at 47.6 FPS.

The practical recommendation is clear: for 1080p gaming, the RTX 5070 provides enormous headroom, making even Ultra settings capable of driving high refresh rate displays. For 1440p, Ultra settings are fully viable with nearly 84 FPS average, which is ideal for 144Hz monitors. For 4K, builders should stick to High settings to maintain a comfortable margin above the 60 FPS threshold, as the 61.9 FPS average at High leaves little room for demanding scenes. The 47.6 FPS at 4K Ultra is the only configuration that fails the playable threshold, so that preset should be avoided.

The i3-12100F does not hold the system back at any playable resolution, and the RTX 5070's 12GB of GDDR7 memory ensures the GPU has enough bandwidth for 4K workloads. This is a well-matched combination for The Technomancer, offering high frame rates across the vast majority of tested settings.