Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 11 | 19 | 20 | 26 |
| 1440p QHD | 25 | 32 | 39 | 51 |
| 1080p Full HD | 41 | 49 | 59 | 79 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The Intel Core i3-12100F paired with the AMD Radeon RX 580 is an older mainstream combination that still appears in many budget-focused builds. For The Technomancer, the recorded data shows this pairing is strictly a 1080p proposition. At higher resolutions, the GPU simply runs out of headroom, with all settings falling well below the 60 FPS playable threshold. The analysis below breaks down exactly what this combo delivers at each resolution and preset.
Measured FPS Breakdown
The measured FPS data for this combination is consistent across all resolution and settings combinations. The database records average FPS only; no minimum or maximum frame time data was captured for this title. Here is the complete breakdown.
At 3840x2160, the results are uniformly poor. The Low preset produces an average of 26.3 FPS, which is the best result at this resolution. Medium drops to 20.3 FPS, High falls further to 18.9 FPS, and Ultra bottoms out at 11.4 FPS. Every single configuration at 4K is far below the 60 FPS playable target, and even the most forgiving Low preset cannot reach a playable state. The gap between Low and Ultra is significant, with the Ultra preset delivering less than half the frame rate of Low.
Moving to 2560x1440 improves things but does not cross the playability threshold. The Low preset averages 51.2 FPS, which is close to playable but still misses the 60 FPS mark. Medium produces 39.4 FPS, High drops to 31.5 FPS, and Ultra falls to 25.4 FPS. The scaling from 4K to 1440p is substantial, with Low improving from 26.3 FPS to 51.2 FPS, a large jump that highlights how resolution-bound this GPU is at the higher setting.
At 1920x1080, the combo finally becomes viable. The Low preset delivers an average of 78.6 FPS, clearing the 60 FPS threshold with a comfortable margin. Medium averages 59.3 FPS, which is just below the playable target of 60 FPS. High produces 49.1 FPS, and Ultra averages 40.8 FPS. The jump from Low to Medium costs roughly 19 FPS, while the jump from Medium to High costs another 10 FPS. Ultra is the most demanding preset and leaves the combo with a 19.2 FPS deficit compared to Medium.
The data shows a clear pattern: this GPU has enough raw throughput for 1080p gaming at the lowest settings, but it struggles as resolution and detail levels rise. The 4K results are effectively unusable, the 1440p results are borderline but not playable, and only 1080p Low exceeds the 60 FPS threshold.
Similar Performance Alternatives
The nearest rivals for the Intel Core i3-12100F in the database's CPU rankings are all close in average benchmark score. The Intel Core 3 N355 has an average score of 13492, which is effectively identical to the i3-12100F's 13494, a delta of 0 percent. The Intel Core i5-9500 scores 13452, sitting 0.3 percent behind. The Intel Core 5 120UL scores 13594, which is 0.7 percent ahead. The Intel Core i7-1250U scores 13351, trailing by 1.1 percent. In practical terms, any of these CPUs would behave similarly in The Technomancer, since the game's engine is not heavily multithreaded and the i3-12100F's single-core performance is its strong suit. The Core i5-9500 is the closest desktop equivalent, while the Core 3 N355 and Core 5 120UL are lower-power alternatives that would land in the same performance envelope.
For the AMD Radeon RX 580, the nearest GPU rivals are also tightly grouped. The NVIDIA GeForce RTX 3050 Ti Mobile scores 12940, which is 0.1 percent behind the RX 580's 12928 average. The NVIDIA GeForce GTX 1660 SUPER scores 12986, sitting 0.4 percent ahead. The AMD Radeon 740M scores 12870, trailing by 0.5 percent. The AMD FirePro W5100 scores 12847, which is 0.6 percent behind. In game performance, the GTX 1660 SUPER is the closest desktop equivalent and would deliver nearly identical frame rates at all tested settings. The RTX 3050 Ti Mobile is a laptop part but has a similar average score, so it would land in the same range. The Radeon 740M is an integrated GPU that happens to score similarly in synthetic benchmarks, though its real-world behavior in a game like The Technomancer would likely match the RX 580's measured results given the close average scores.
Anyone considering an upgrade from this combo should look at the GTX 1660 SUPER as the direct performance peer, since the data shows no meaningful difference between the two in aggregate benchmarks.
Best Settings per Resolution
The database records the most demanding preset that stays at or above 60 FPS for each resolution. At 3840x2160, no preset achieves 60 FPS. The best recorded average is 26.3 FPS on Low, which is not playable by the defined threshold. At 2560x1440, the situation is the same: no preset reaches 60 FPS, with Low topping out at 51.2 FPS. The 1920x1080 resolution is the only one where the combo can maintain playable frame rates. The Low preset averages 78.6 FPS, which clears the threshold. Medium averages 59.3 FPS, which is just below the 60 FPS target and therefore not counted as playable.
The practical takeaway is that 1080p Low is the only playable configuration for this hardware. Users who want to run Medium at 1080p will need to accept a frame rate slightly below 60 FPS, which many players would find acceptable, but the strict playability metric in the database places the cutoff at Low. At 1440p and above, this combo cannot deliver a playable experience regardless of settings.
The Verdict
The verdict is clear: this PC can run The Technomancer, but only at 1080p with the Low preset. The verdictByResolution data shows no playable settings at 3840x2160 or 2560x1440. At 1920x1080, the Low preset is the sole playable option, with an average of 78.6 FPS. Medium at 1080p comes very close at 59.3 FPS, and users who tolerate a slight dip below 60 FPS could reasonably run it, but the database's playable threshold is set at 60 FPS.
For anyone with a 1440p monitor, this combo is not sufficient for The Technomancer. The best case at 1440p is 51.2 FPS on Low, which is below the threshold and would feel noticeably less smooth during combat. At 4K, the results are poor across the board, with even Low falling to 26.3 FPS. This is a 1080p gaming setup for this specific title, and users should plan their expectations accordingly.
CPU and GPU Roles
The measured data shows a clear GPU-bound scenario at higher resolutions. At 3840x2160, the frame rates are extremely low across all presets, with Low at 26.3 FPS and Ultra at 11.4 FPS. This massive spread between presets indicates that the GPU's shading and memory bandwidth are the limiting factors. The RX 580 has 8 GB of GDDR5 memory and a 256-bit bus, which is sufficient for capacity but not for the fill rate demands of 4K in this game.
At 2560x1440, the same pattern holds. Low averages 51.2 FPS while Ultra drops to 25.4 FPS, a difference of 25.8 FPS. The scaling from Low to Medium to High to Ultra is roughly linear, which is typical of a GPU-limited workload. The CPU is not the bottleneck here, as the i3-12100F's single-thread performance is more than adequate for a 2016 action RPG.
At 1920x1080, the CPU begins to matter more relative to the GPU, but the data still points to the GPU as the primary constraint. Low hits 78.6 FPS, which is well above the threshold, while Ultra drops to 40.8 FPS. The fact that Medium falls just short of 60 FPS at 59.3 FPS suggests that the GPU is right at the edge of its capability at this resolution. The i3-12100F, with its strong single-core score of 1674 in Cinebench R23, is not holding the system back at 1080p. The bottleneck shifts only slightly toward the CPU at lower resolutions, but the overall limitation remains the GPU's pixel throughput and texture fill rate.
The scaling between resolutions confirms this. Going from 1080p Low to 1440p Low drops the average from 78.6 FPS to 51.2 FPS, a reduction of 27.4 FPS. Going from 1440p Low to 4K Low drops it further to 26.3 FPS. This resolution scaling is consistent with a GPU that has 32 ROPs and a 256.0 GB/s memory bandwidth. The CPU would show larger scaling effects if it were the bottleneck, but the data shows the opposite.
How This Combo Ranks
The Intel Core i3-12100F and AMD Radeon RX 580 combination ranks 3365 out of 3696 tested combos in the database for The Technomancer. This places the combo in the lower percentile of all tested hardware pairings, roughly the 9th percentile from the top. The rank reflects the GPU's age and its performance ceiling in this title. The RX 580 was released in 2017 and is now end-of-life, with a percentileVsAllGpus of 53, meaning it sits near the middle of all GPUs tested. The i3-12100F has a percentileVsAllCpus of 68, which is higher, but the GPU drags the overall combo ranking down.
The low rank is not surprising given the measured FPS data. A combo that can only achieve playable frame rates at 1080p Low is going to sit far down the list when compared against modern hardware. The GPU's average benchmark score of 12928 is modest, and its nearest rivals are all similarly positioned. The combo rank of 3365 out of 3696 means that roughly 91 percent of tested combinations deliver better performance in this game. This is a functional but clearly dated setup, and the data reflects that reality. Users running this hardware should stick to 1080p and the Low preset for a smooth experience, or consider reducing the resolution scaling if their display supports it.