Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 56 | 73 | 85 | 114 |
| 1440p QHD | 108 | 136 | 161 | 204 |
| 1080p Full HD | 163 | 208 | 246 | 314 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 5080 combination delivers a strong performance profile for The Technomancer, with benchmark data showing playable frame rates across all tested resolutions. The measured results place this pairing at rank 137 out of 3696 tested combos, indicating a top-tier configuration that handles the game's demands with considerable headroom at lower resolutions.
Similar Performance Alternatives
The CPU and GPU each have distinct nearest rivals that would produce broadly similar behavior in The Technomancer. For the AMD Ryzen 9 9900X, its average benchmark score of 57498 places it within 1.4% of several competing processors. The AMD EPYC 9015 scores 57555, a delta of -0.1%, making it virtually indistinguishable in multi-threaded workloads. The AMD EPYC 7313 trails by a mere 0.2% with a score of 57399, while the Intel Core i9-14900 leads slightly at 58115, representing a 1.1% advantage. The Intel Xeon Platinum 8260M sits at 58323, which is 1.4% higher than the 9900X. These margins are small enough that in a game like The Technomancer, which does not appear to be heavily CPU-bound at higher resolutions, swapping between these processors would likely produce frame rate differences well under the perceptible threshold.
On the GPU side, the RTX 5080's average benchmark score of 56083 places it near several AMD alternatives. The AMD Radeon 8060S scores 55757, a delta of 0.6% lower, meaning it would deliver nearly identical frame rates. The AMD Radeon RX 6750 GRE 12 GB comes in at 55698, just 0.7% behind. The AMD Radeon Pro W5700X is 2.3% slower with a score of 54828, while the AMD Radeon RX 9070 GRE actually outperforms the RTX 5080 by 2.2% with a score of 57367. For The Technomancer specifically, the RX 9070 GRE might edge out the RTX 5080 by a few frames per second at each settings level, but the practical difference would be minimal. The RTX 5080's 87th percentile ranking among all GPUs, combined with the CPU's 92nd percentile ranking, suggests this combo sits comfortably in the upper echelon of tested hardware.
Best Settings per Resolution
At 3840x2160, the data shows that High settings provide the most demanding experience that maintains at least 60 FPS. The average frame rate at High is 73.3 FPS, which clears the playable threshold with a reasonable margin. Medium settings run at 84.7 FPS, and Low settings reach 114 FPS, but High is the optimal choice for visual fidelity without sacrificing smoothness. Ultra settings fall short at 56 FPS, missing the 60 FPS threshold by a noticeable 4 frames.
Moving to 2560x1440, the RTX 5080 has enough headroom to enable Ultra settings while keeping the average above 60 FPS. Ultra runs at 107.7 FPS, which is well above the threshold and represents the best visual quality available. High settings produce 135.9 FPS, Medium achieves 160.7 FPS, and Low reaches 203.6 FPS. All four settings clear 60 FPS, so the choice comes down to whether the user prioritizes visuals or raw frame rates.
At 1920x1080, the combination is so powerful that every setting delivers exceptional performance. Ultra settings average 162.9 FPS, which is more than double the playable threshold. High settings reach 207.6 FPS, Medium hits 246.1 FPS, and Low tops out at 314.2 FPS. The data indicates that even the most demanding preset at 1080p leaves substantial performance on the table, making this resolution the least challenging for the combo.
CPU and GPU Roles
The scaling between resolutions and presets reveals how the CPU and GPU divide responsibilities in The Technomancer. At 1920x1080, the frame rates are exceptionally high across all settings, ranging from 162.9 FPS at Ultra to 314.2 FPS at Low. This wide spread suggests that the GPU is the primary bottleneck at lower resolutions, since reducing graphical settings yields dramatic frame rate improvements. The CPU is clearly capable of feeding the GPU at these frame rates, as even the lowest settings produce over 300 FPS without the CPU becoming the limiting factor.
When resolution increases to 2560x1440, the performance drops by roughly 34% to 40% depending on the preset. Ultra falls from 162.9 to 107.7 FPS, a reduction of 55.2 FPS, while Low decreases from 314.2 to 203.6 FPS. This scaling indicates that the GPU workload grows substantially with pixel count, but the CPU still keeps pace. The gap between Low and Ultra at 1440p is 95.9 FPS, compared to 151.3 FPS at 1080p, showing that the GPU becomes more dominant as resolution rises.
At 3840x2160, the pattern continues. Ultra drops to 56 FPS, which is below the playable threshold, while High manages 73.3 FPS. The difference between Low and Ultra at 4K is 58 FPS, narrower than at lower resolutions. This compression suggests that the GPU is now the overwhelming bottleneck, as even the lowest settings cannot fully alleviate the rendering load. The CPU's role diminishes further; its 12 cores and 24 threads are more than sufficient for this 2016 title, and the data shows no evidence of CPU limitation even at 4K with Low settings producing 114 FPS.
FAQ
Q: Can this combination run The Technomancer at 4K with the highest settings?
A: No. At 3840x2160 with Ultra settings, the average frame rate is 56 FPS, which falls below the 60 FPS playable threshold. High settings are the best choice at this resolution, delivering 73.3 FPS.
Q: What is the best settings preset for 1440p gaming?
A: All four presets at 2560x1440 exceed 60 FPS, but Ultra provides the best visual experience at 107.7 FPS. High runs at 135.9 FPS, Medium at 160.7 FPS, and Low at 203.6 FPS.
Q: How does the performance at 1080p compare to 4K?
A: At 1920x1080, Ultra settings average 162.9 FPS, which is 106.9 FPS higher than the 56 FPS at 3840x2160 Ultra. Even Low settings at 1080p produce 314.2 FPS, more than five times the 4K Ultra result.
Q: Is the RTX 5080 or the Ryzen 9 9900X the limiting factor in this game?
A: The GPU is the limiting factor at all resolutions. The frame rate drops significantly as resolution increases, while the CPU maintains sufficient headroom. The RTX 5080's 87th percentile ranking versus the CPU's 92nd percentile supports this conclusion.
Q: What frame rate can be expected at 1440p with Medium settings?
A: The measured average is 160.7 FPS, which is comfortably above the 60 FPS threshold and leaves room for higher settings if visual quality is preferred.
Q: Does the combo rank well among all tested hardware?
A: Yes, this pairing ranks 137th out of 3696 tested combinations, placing it in the top 4% of all configurations tested for The Technomancer.
Measured FPS Breakdown
The complete dataset of average frame rates shows a clear progression across resolutions and settings. At 1920x1080, Low settings produce 314.2 FPS, Medium reaches 246.1 FPS, High achieves 207.6 FPS, and Ultra drops to 162.9 FPS. The step from Low to Medium costs 68.1 FPS, Medium to High costs another 38.5 FPS, and High to Ultra costs 44.7 FPS. These decrements are relatively uniform, suggesting each preset level adds a similar rendering workload.
At 2560x1440, the frame rates are 203.6 FPS for Low, 160.7 FPS for Medium, 135.9 FPS for High, and 107.7 FPS for Ultra. The difference between Low and Ultra is 95.9 FPS, which is proportionally similar to the 1080p gap of 151.3 FPS but smaller in absolute terms. The transition from 1080p to 1440p reduces frame rates by approximately 35% across all presets, which aligns with the increase in pixel count from 2.07 million to 3.69 million.
At 3840x2160, the results are 114 FPS for Low, 84.7 FPS for Medium, 73.3 FPS for High, and 56 FPS for Ultra. The drop from 1440p to 4K is steeper, with Low falling from 203.6 to 114 FPS, a 44% reduction. Ultra falls from 107.7 to 56 FPS, a 48% reduction. This steeper scaling at higher resolutions reflects the growing pixel count, which more than doubles from 1440p to 4K (3.69 million to 8.29 million pixels).
How This Combo Ranks
The combination of the Ryzen 9 9900X and RTX 5080 achieves a rank of 137 out of 3696 tested combos for The Technomancer. This places the pairing in the 96th percentile of all tested configurations, meaning it outperforms approximately 96% of the hardware combinations in the database for this specific game. The ranking reflects the substantial headroom this setup has at 1080p and 1440p, where it can max out settings while maintaining frame rates well above 60 FPS.
The GPU's 87th percentile ranking among all GPUs is the more influential factor in this result, as the game's performance scales heavily with resolution. The CPU's 92nd percentile ranking ensures that no CPU bottleneck exists even at the highest frame rates observed. The gap between this combo and lower-ranked alternatives would be most pronounced at 4K, where the RTX 5080's raw rendering power becomes the deciding factor. At 1080p, similarly ranked CPUs paired with weaker GPUs might approach these frame rates, but the 4K results at 56 FPS for Ultra highlight the GPU's importance.
The Verdict
The data shows that this PC can run The Technomancer at all three tested resolutions, but with different limitations per resolution. At 1920x1080, every settings preset clears 60 FPS, with Ultra delivering 162.9 FPS and Low reaching 314.2 FPS. The best settings at this resolution are Ultra, as the frame rate remains more than double the playable threshold.
At 2560x1440, all four presets also clear 60 FPS. Ultra provides 107.7 FPS, which is the best visual quality available. The performance headroom is substantial, with even the most demanding preset leaving 47.7 FPS of margin above the threshold. High settings at 135.9 FPS would suit users who prefer higher refresh rates.
At 3840x2160, the results are more constrained. Ultra settings fail to hit 60 FPS, averaging only 56 FPS. High settings, however, deliver 73.3 FPS and represent the best settings choice for 4K. Medium runs at 84.7 FPS and Low at 114 FPS, both comfortably playable. The verdict is clear: this combo provides a smooth experience at 4K with High settings, and fully playable performance at every preset below 4K. The single caveat is that 4K Ultra is not achievable at 60 FPS, but the margin is small enough that users seeking maximum visual fidelity could likely tolerate the 56 FPS average.