Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 55 | 64 | 84 |
| 1440p QHD | 78 | 100 | 117 | 152 |
| 1080p Full HD | 119 | 153 | 179 | 233 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 4070 combination delivers a wide range of performance in The Technomancer, scaling from a demanding 4K experience to a high-refresh-rate 1080p setup. The measured data shows that this pairing is capable of exceeding the 60 FPS threshold at every tested resolution, though the preset ceiling varies significantly. The following analysis breaks down the benchmark results, comparing nearby hardware, optimal settings, and the balance between CPU and GPU load.
Similar Performance Alternatives
The benchmark data places the AMD Ryzen 9 9900X in the 92nd percentile among all CPUs, with an average benchmark score of 57498. Its nearest rivals in synthetic testing are a tight cluster of server and desktop parts. The AMD EPYC 9015 scores 57555, which is 0.1% higher than the 9900X. The AMD EPYC 7313 trails by 0.2% with a score of 57399. On the Intel side, the Core i9-14900 leads this group with a score of 58115, putting it 1.1% ahead of the 9900X. The Intel Xeon Platinum 8260M posts a score of 58323, which is 1.4% higher. For gaming workloads, these deltas are minor; the 9900X sits within a 1.5% band of these four alternatives, meaning a system built with any of them would likely produce nearly identical frame rates in The Technomancer when paired with the same GPU.
For the graphics card, the NVIDIA GeForce RTX 4070 holds the 81st percentile among all GPUs, with an average benchmark score of 37648. Its nearest rivals include the NVIDIA Tesla P4, which scores 37628, a mere 0.1% difference. The AMD Radeon RX Vega 56 is 0.4% behind with a score of 37507. The NVIDIA GeForce RTX 4080 Mobile is the strongest competitor here, scoring 38135, which is 1.3% higher than the desktop 4070. The AMD Radeon PRO W6400 sits 1.3% lower with a score of 37157. These results indicate that the RTX 4070’s performance profile is closely matched by the RTX 4080 Mobile, and the RX Vega 56 is the closest AMD alternative. In practical terms for The Technomancer, swapping the 4070 for any of these rivals would shift average FPS by roughly one to three frames, based on the synthetic score deltas.
Best Settings per Resolution
The measured FPS data provides clear guidance for the most demanding preset that maintains an average of at least 60 FPS at each resolution.
At 3840x2160, the Ultra preset drops to an average of 43 FPS, which is below the playable threshold. The High preset averages 55 FPS, also falling short of 60 FPS. The Medium preset achieves an average of 64 FPS, with a minimum of 55 FPS and a maximum of 74 FPS. This makes Medium the highest playable setting at 4K, as it is the only preset above the Low tier that clears the 60 FPS average mark. The Low preset runs at 84 FPS on average, but Medium is the optimal choice for visual quality while staying above the threshold.
At 2560x1440, the situation improves substantially. The Ultra preset averages 78 FPS, which is well above 60 FPS. The High preset runs at 100 FPS, Medium at 117 FPS, and Low at 152 FPS. Since Ultra clears the threshold with room to spare, it is the best setting at this resolution. The data shows no reason to drop below Ultra here, as even the most demanding preset holds a comfortable margin above the playable mark.
At 1920x1080, the Ultra preset averages 119 FPS. High runs at 153 FPS, Medium at 179 FPS, and Low at 233 FPS. All presets far exceed 60 FPS, so Ultra is the recommended setting. The 119 FPS average at Ultra also leaves headroom for demanding scenes, though the minimum FPS was not recorded for this preset.
CPU and GPU Roles
The scaling of frame rates across resolutions and presets reveals how the CPU and GPU share the workload in The Technomancer. The data shows that the GPU becomes the primary bottleneck at higher resolutions, while the CPU’s influence is more visible at lower resolutions and higher preset levels.
Comparing 1080p and 4K at the Low preset, the average FPS drops from 233 to 84, a reduction of 149 FPS. This is a 64% decrease in performance. At the Ultra preset, the drop is from 119 FPS at 1080p to 43 FPS at 4K, a reduction of 76 FPS, or 64% as well. The proportional decline is nearly identical across presets, which suggests that the GPU is the limiting factor in both cases, as the CPU has sufficient headroom to feed the graphics card at all resolutions.
The preset scaling within a single resolution further clarifies the GPU’s role. At 4K, moving from Low to Ultra reduces the average FPS from 84 to 43, a 49% drop. At 1080p, the same preset change goes from 233 to 119 FPS, a 49% drop as well. This consistent 49% reduction across resolutions indicates that the GPU is handling the bulk of the rendering load, and the CPU is not introducing a bottleneck at any tested configuration.
The CPU’s contribution is more evident when looking at the difference between Low and Ultra at the same resolution. At 1080p, the gap between Low (233 FPS) and Ultra (119 FPS) is 114 FPS. At 4K, the gap is 41 FPS. The larger absolute gap at 1080p suggests that the CPU is capable of pushing very high frame rates when the GPU is less stressed, but the GPU quickly becomes the limiting factor as resolution increases. The Ryzen 9 9900X, with its high multi-threaded scores such as 32172 in Cinebench R23 multi-core, is not the bottleneck here; the data points to the RTX 4070 as the component that governs the playable settings at each resolution.
FAQ
Q: Can this PC run The Technomancer at 4K resolution?
A: Yes, at 4K the system can run the game at Medium settings with an average of 64 FPS. The High preset averages 55 FPS, which is below the 60 FPS threshold, and Ultra averages 43 FPS.
Q: What is the highest preset that maintains 60 FPS at 1440p?
A: The Ultra preset at 2560x1440 averages 78 FPS, making it the highest playable setting. All lower presets also exceed 60 FPS, with High at 100 FPS, Medium at 117 FPS, and Low at 152 FPS.
Q: How does the RTX 4070 compare to its nearest rival, the RTX 4080 Mobile?
A: The RTX 4080 Mobile has an average benchmark score of 38135, which is 1.3% higher than the RTX 4070’s score of 37648. This difference would translate to a negligible frame rate gap in The Technomancer.
Q: Is the CPU or GPU more important for this game at 1080p?
A: The GPU is the primary factor. At 1080p, the Ultra preset averages 119 FPS while Low averages 233 FPS, showing that the RTX 4070’s workload dictates the frame rate. The CPU’s performance is sufficient, as indicated by the high scores in synthetic tests.
Q: What is the minimum FPS recorded for the Medium preset at 4K?
A: The minimum FPS at 3840x2160 with Medium settings is 55 FPS. The average is 64 FPS, and the maximum is 74 FPS.
Q: How does this combo rank among all tested combinations for this game?
A: The combination of the AMD Ryzen 9 9900X and NVIDIA GeForce RTX 4070 ranks 847th out of 3696 tested combos, placing it in the top 23% of all configurations.
Measured FPS Breakdown
The following tables list the exact measured frame rates for each resolution and preset combination.
At 3840x2160:
- High: average 55 FPS
- Low: average 84 FPS
- Medium: average 64 FPS, minimum 55 FPS, maximum 74 FPS
- Ultra: average 43 FPS
At 2560x1440:
- High: average 100 FPS
- Low: average 152 FPS
- Medium: average 117 FPS, minimum 99 FPS, maximum 134 FPS
- Ultra: average 78 FPS
At 1920x1080:
- High: average 153 FPS
- Low: average 233 FPS
- Medium: average 179 FPS, minimum 152 FPS, maximum 206 FPS
- Ultra: average 119 FPS
The data shows that the Medium preset is the only configuration with recorded minimum and maximum values, providing a more complete picture of frame time consistency. At all resolutions, the Medium preset’s minimum FPS stays above the 60 FPS threshold except at 4K, where the minimum dips to 55 FPS despite the average being 64 FPS.
How This Combo Ranks
The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 4070 combination ranks 847th out of 3696 tested configurations for The Technomancer. This places the combo in the 77th percentile, meaning roughly 23% of tested systems are faster. The rank reflects the balance between the CPU’s strong synthetic performance, which sits in the 92nd percentile among all CPUs, and the GPU’s more moderate standing in the 81st percentile among all GPUs. The high CPU score does not translate into a top-tier gaming rank because the RTX 4070, while capable, is not the fastest GPU available. The 847th rank is consistent with a system that can handle the game smoothly at most settings but is not optimized for maximum frame rates at 4K Ultra.
The Verdict
This PC can run The Technomancer, and it does so with clear margins at most settings. The verdict by resolution is as follows:
- At 3840x2160, the playable settings are Low and Medium. The best playable setting is Medium, with an average of 64 FPS. High and Ultra fall below the 60 FPS threshold, with averages of 55 and 43 FPS respectively.
- At 2560x1440, all four presets are playable. The best setting is Ultra, which averages 78 FPS. This gives the user full visual fidelity while maintaining a frame rate well above the playable threshold.
- At 1920x1080, all presets are playable, and Ultra is the best setting with an average of 119 FPS. This resolution offers the most headroom, with even the most demanding preset nearly doubling the 60 FPS target.
The data indicates that this combination is best suited for 1440p gaming, where it can run at maximum settings with a comfortable average of 78 FPS. At 1080p, it delivers excellent performance for high-refresh-rate displays, and at 4K, it requires a reduction to Medium settings to stay above 60 FPS. The system is fully capable of running the game, with the GPU being the limiting factor at higher resolutions.