Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
194 FPS
Ultra 1080p Measured
99 FPS

1440p (2K / QHD)

Low 1440p Measured
125 FPS
Ultra 1440p Measured
65 FPS

4K (Ultra HD)

Low 4K Measured
66 FPS
Ultra 4K Measured
34 FPS
8ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 57,498
Graphics Card
Required 27,947
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 48 53 66
1440p QHD 65 82 94 125
1080p Full HD 99 125 149 194

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 125
1920x1080 Low 194
1920x1080 Medium 149
1920x1080 Ultra 99
2560x1440 High 82
2560x1440 Low 125
2560x1440 Medium 94
2560x1440 Ultra 65
3840x2160 High 48
3840x2160 Low 66
3840x2160 Medium 53
3840x2160 Ultra 34

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 9 9900X and NVIDIA GeForce RTX 3070 combination lands at rank 1574 out of 3696 tested combos for The Technomancer, placing it in the upper-middle portion of the database. That rank reflects a pairing where the CPU is far more capable than the GPU, and the measured frame rates confirm the RTX 3070 is the limiting factor across most settings. The Ryzen 9 9900X sits in the 92nd percentile of all CPUs, with an average benchmark score of 57498, while the RTX 3070 is in the 61st percentile of all GPUs, with an average benchmark score of 17208. This imbalance shapes every result in this game, and it means the data leans heavily on the GPU’s 8 GB GDDR6 memory and 448.0 GB/s bandwidth to carry the load. For a title like The Technomancer, an Action RPG from 2016, this combo delivers playable frame rates at every resolution, but the headroom for ultra settings narrows sharply as resolution climbs.

How This Combo Ranks

At rank 1574 out of 3696 tested combos, this pairing places within the 57th percentile of all tested systems for The Technomancer. That is a middling-to-solid position, and the data suggests the ranking is driven almost entirely by the GPU. The CPU’s percentileVsAllCpus of 92 indicates it outperforms the vast majority of processors, but the GPU’s percentileVsAllGpus of 61 is the bottleneck. In a game that heavily emphasizes graphics over physics or AI simulation, the RTX 3070’s 20.31 TFLOPS FP32 throughput and 448.0 GB/s memory bandwidth define the ceiling. Compared to the CPU’s nearest rivals, the Ryzen 9 9900X is essentially tied with the AMD EPYC 9015 (deltaPct -0.1), slightly ahead of the AMD EPYC 7313 (deltaPct 0.2), and just behind the Intel Core i9-14900 (deltaPct -1.1) and Intel Xeon Platinum 8260M (deltaPct -1.4). Those differences are negligible for gaming—sub-1.5%—so the CPU is never the deciding factor here. On the GPU side, the RTX 3070 is nearly identical to the AMD Radeon RX 7600 XT (deltaPct 0.7) and the aging NVIDIA GeForce GTX 690 (deltaPct 1), while it trails the NVIDIA Tesla K40c by 1.5%. That last comparison is misleading, as the Tesla K40c is a compute-oriented card, but the number stands. The practical takeaway: this combo ranks where it does because the GPU is a mid-tier part paired with a high-tier CPU, and the game’s performance will mirror that imbalance.

Best Settings per Resolution

The playable threshold is 60 FPS, and the data at each resolution tells a different story about what the RTX 3070 can sustain.

At 3840x2160 (4K), the only playable setting is Low. The measured average at Low is 66.4 FPS, which clears the threshold but leaves little margin. Medium drops to 53 FPS, and High falls to 47.5 FPS, while Ultra bottoms out at 34.2 FPS. So the best setting at 4K is Low, with an average of 66.4 FPS. This is a playable experience, but visuals will be noticeably reduced. The gap between Low and Medium is 13.4 FPS, indicating that the GPU struggles with the extra shading and lighting work at higher presets in this resolution. For a 4K display, you would be locked to the lowest preset to stay smooth, and even that does not guarantee consistency since the data provides no min/max values for these runs.

At 2560x1440 (1440p), every preset is playable. Low delivers 124.7 FPS, Medium 93.7 FPS, High 82.4 FPS, and Ultra 64.8 FPS. Since Ultra stays above the 60 FPS threshold, the best settings at 1440p are Ultra, with an average of 64.8 FPS. That is a usable margin—roughly 4.8 FPS above the playable line—but it is not comfortable. If you want more headroom, dropping to High gives 82.4 FPS, a 27.2% increase over Ultra. The progression from Low to Ultra is nearly linear in frame cost: each step up reduces the average by roughly 20-30 FPS, with the largest single drop being from Medium to High (11.3 FPS) and from High to Ultra (17.6 FPS). Ultra is the best visual preset that remains playable, but it is the least future-proof choice.

At 1920x1080 (1080p), the RTX 3070 has plenty of room. Low delivers 194.1 FPS, Medium 148.6 FPS, High 124.9 FPS, and Ultra 98.5 FPS. All presets are far above the 60 FPS threshold, so the best settings are Ultra, with an average of 98.5 FPS. Even the heaviest preset leaves a 38.5 FPS cushion over the playable line. The frame cost of moving from High to Ultra is 26.4 FPS, which is significant, but you are still nearly 40 FPS above the minimum standard. For competitive or smooth play on a 1080p monitor, this combo is effectively overkill—the game never stresses the hardware enough to approach the threshold. The data shows a 95.6 FPS difference between Low and Ultra at 1080p, which highlights how much settings scale at this resolution.

CPU and GPU Roles

The data shows a clear division of labor: the GPU dominates at all resolutions when settings increase, while the CPU remains idle in comparison. The Ryzen 9 9900X has 12 cores and 24 threads, with a boost clock of 5.60 GHz, and its benchmark scores are enormous (Cinebench R23 multi-core 32172, Geekbench multi-core 22174). The Technomancer is an Action RPG from 2016, and such titles rarely use more than a few cores. The GPU must render the world, and the RTX 3070’s 5888 shading units and 96 ROPs handle that workload.

Looking at the scaling between resolutions and presets reveals the GPU bottleneck. At 1080p, the difference between Low and Ultra is 95.6 FPS (194.1 vs 98.5), a 49.2% drop. At 1440p, the same preset swing costs 59.9 FPS (124.7 to 64.8), a 48.0% drop. At 4K, the swing is 32.2 FPS (66.4 to 34.2), a 48.5% drop. The percentage drop is consistent across resolutions—about 48-49%—which indicates the GPU’s compute and memory bandwidth are the limiting factor. If the CPU were the bottleneck, you would expect the percentage drop to shrink as resolution increases (because higher resolution shifts the load to the GPU, but the CPU would still cap frame rates at the same level). Instead, the frame rates drop proportionally at every preset level, confirming that the RTX 3070’s 448.0 GB/s bandwidth and 20.31 TFLOPS are the limiting resource.

The CPU’s role becomes more noticeable at lower resolutions and lower presets. At 1080p Low, the combo hits 194.1 FPS, which is high enough that the CPU’s single-thread performance (Geekbench single-core 3010, PassMark single-thread 4672) might start to matter, but the data does not show a CPU cap—there are no min/max values to detect frame variance. At 1440p Low, 124.7 FPS still leaves headroom, and at 4K Low, 66.4 FPS is well below any CPU limit. The CPU’s 12 cores are irrelevant for this game; what matters is its high boost clock, and the data shows no scenario where the CPU restricts performance. In practical terms, you could pair this CPU with a stronger GPU and see better results, but for this combo, the GPU is the sole performance anchor.

Similar Performance Alternatives

If you are considering this combo, the nearest rivals for each component indicate what else would behave similarly. The CPU’s closest cousins are the AMD EPYC 9015 (deltaPct -0.1), AMD EPYC 7313 (deltaPct 0.2), Intel Core i9-14900 (deltaPct -1.1), and Intel Xeon Platinum 8260M (deltaPct -1.4). In gaming, those sub-1.5% differences are imperceptible—the Ryzen 9 9900X and these alternatives will all feed the RTX 3070 identically. The Intel Core i9-14900 is the only consumer-grade rival in that list, and it is 1.1% slower in average benchmark score, which means you would see no measurable frame rate difference in The Technomancer. The EPYC parts are server chips, so they are not practical for a desktop, but the numbers show the CPU is not a differentiator.

For the GPU, the nearest rivals are the AMD Radeon RX 7600 XT (deltaPct 0.7), NVIDIA GeForce GTX 690 (deltaPct 1), and AMD Radeon HD 7970M (deltaPct 1.1), with the NVIDIA Tesla K40c (deltaPct -1.5) on the other side. The RX 7600 XT is the realistic alternative—it is 0.7% faster in average benchmark score, so it would produce nearly identical FPS numbers at every resolution and setting. The GTX 690 and HD 7970M are much older hardware with different driver characteristics, but the benchmark scores place them in the same performance class. The Tesla K40c is a compute card, not meant for gaming, but its 1.5% deficit means it would be slightly slower. In practice, the RTX 3070 and RX 7600 XT are interchangeable for this game, and the other names are curiosity rather than practical suggestions.

Measured FPS Breakdown

The full set of measured average frame rates is as follows. Note that min and max values are not available, so all analysis uses averages only.

1920x1080 (1080p):

  • Low: 194.1 FPS
  • Medium: 148.6 FPS
  • High: 124.9 FPS
  • Ultra: 98.5 FPS

2560x1440 (1440p):

  • Low: 124.7 FPS
  • Medium: 93.7 FPS
  • High: 82.4 FPS
  • Ultra: 64.8 FPS

3840x2160 (4K):

  • Low: 66.4 FPS
  • Medium: 53.0 FPS
  • High: 47.5 FPS
  • Ultra: 34.2 FPS

The pattern is consistent: each resolution step down from 1080p to 1440p to 4K reduces the average FPS by roughly 50% for the same preset. For example, Low goes from 194.1 to 124.7 to 66.4. Ultra goes from 98.5 to 64.8 to 34.2. The 4K Ultra result of 34.2 FPS is the worst in the dataset, and 4K High is a 47.5 FPS—both below playable. At 1440p, Ultra is the only preset that is close to the threshold, and every lower preset is far above it. At 1080p, all presets are above 98 FPS, so there is no risk of dropping below 60 FPS. The data also shows that the gap between Medium and High is smaller than the gap between High and Ultra at all resolutions—for instance, at 1440p, Medium to High is a 11.3 FPS drop, while High to Ultra is a 17.6 FPS drop. This suggests that the Ultra preset carries a disproportionate performance cost, likely due to extra post-processing or shadow effects that the RTX 3070’s 8 GB frame buffer must handle.

FAQ

Q: Can this combo run The Technomancer at 4K with stable frame rates?

A: Only at Low settings. The measured average at 3840x2160 Low is 66.4 FPS, which is above the 60 FPS playable threshold. Medium drops to 53.0 FPS, High 47.5 FPS, and Ultra 34.2 FPS—all below 60. So 4K is playable only on the lowest preset.

Q: What is the best preset at 1440p for this combo?

A: Ultra is playable at 1440p, with an average of 64.8 FPS. That is the most demanding preset that stays above the 60 FPS threshold. If you want more headroom, High gives 82.4 FPS, but Ultra is the highest playable setting.

Q: Is the Ryzen 9 9900X or RTX 3070 the limiting factor in this game?

A: The GPU is clearly the limiting factor. The data shows that frame rates drop proportionally with resolution and preset, which is typical of GPU-bound workloads. The CPU’s 92nd percentile ranking and enormous multithread scores (e.g., Cinebench R23 32172) are far beyond what a 2016 Action RPG needs, and the GPU’s 61st percentile ranking matches the observed performance.

Q: How does the RTX 3070 compare to the AMD Radeon RX 7600 XT in this game?

A: The RX 7600 XT has an average benchmark score of 17083, which is 0.7% lower than the RTX 3070’s 17208. That translates to a negligible difference in frame rates—less than 1 FPS at most settings. You would see essentially identical performance in The Technomancer.

Q: At what resolution can this combo run Ultra settings with a comfortable margin above 60 FPS?

A: At 1080p, Ultra delivers 98.5 FPS, which is 38.5 FPS above the playable threshold. That is the only resolution where Ultra has a comfortable margin. At 1440p, Ultra is only 4.8 FPS above 60, which is playable but tight.

Q: Does the Ryzen 9 9900X’s 12-core design matter for The Technomancer?

A: No. The game is from 2016 and is GPU-limited with this combination. The CPU’s 12 core and 24 threads are far beyond what the game can use; its high single-core performance (Geekbench single-core 3010) is more relevant, but the data shows no evidence of CPU bottlenecking even at 1080p Low (194.1 FPS). The GPU is the only component that matters for frame rates.