Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 31 | 36 | 47 |
| 1440p QHD | 43 | 56 | 65 | 85 |
| 1080p Full HD | 66 | 85 | 100 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
How This Combo Ranks
The AMD Ryzen 9 7900X paired with the NVIDIA GeForce RTX 2060 lands at rank 2911 out of 3696 tested combinations in The Technomancer. That places this configuration in the lower-middle portion of the database, with roughly 79% of tested combos delivering higher frame rates in this specific title. The ranking reflects the pairing of a high-end modern CPU with a mid-range GPU from an older generation, which creates a noticeable bottleneck in a game that leans heavily on graphics throughput.
The CPU itself sits in the 91st percentile among all processors in the database, and its average benchmark score of 53288 places it comfortably ahead of most desktop chips. The GPU, however, sits in the 58th percentile among all graphics cards, with an average benchmark score of 15290. That gap in relative standing explains the overall combo rank: the processor is vastly more capable than the graphics card, and in The Technomancer, the GPU becomes the limiting factor at every resolution tested. The data shows a system that is CPU-rich but GPU-constrained, and the game's performance ceiling is set by the RTX 2060, not the Ryzen 9 7900X.
CPU and GPU Roles
The recorded data makes the division of labor clear. At 1920x1080, the lowest resolution tested, the RTX 2060 still manages to push frame rates that range from 66 FPS at Ultra settings to 130 FPS at Low settings. The CPU has ample headroom here, as evidenced by its 3DMark multi-threaded score of 12536 and Cinebench R23 multi-core result of 29300. Neither of those strengths is fully utilized at 1080p, because the GPU is already near its limit even at the lowest preset.
Scaling to 2560x1440 shows the GPU taking on more responsibility. Average frame rates drop from 85 FPS at Low to 56 FPS at High, and the Medium preset produces 65 FPS with a minimum of 55 FPS. At 3840x2160, the GPU is clearly overwhelmed: Ultra settings fall to 24 FPS, High delivers only 31 FPS, and even Low settings barely reach 47 FPS. The resolution scaling pattern is consistent with a GPU-bound scenario. Going from 1080p Low to 1440p Low reduces average FPS from 130 to 85, a 35% drop, while moving from 1440p Low to 4K Low reduces it further to 47, another 45% drop. These are the kinds of steep declines that occur when pixel throughput, not CPU compute, is the constraint.
The Ryzen 9 7900X's role is effectively to ensure that the GPU never waits on the processor. Its 12 cores and 24 threads, combined with a boost clock of 5.60 GHz, provide far more compute than The Technomancer requires at any settings combination in the database. The game's engine, released in 2016, does not scale meaningfully beyond a handful of threads, so the CPU's massive multi-core advantage is largely irrelevant here. Instead, the single-thread performance, measured at 2016.5 in Cinebench R23 single-core, keeps the frame pacing stable, but it cannot raise the GPU's output.
FAQ
Q: Can this PC run The Technomancer at 1920x1080 with Ultra settings?
A: Yes. The measured average FPS at 1080p Ultra is 66, which clears the 60 FPS playable threshold. The database lists Ultra among the playable settings for this resolution.
Q: What is the best playable settings preset at 2560x1440?
A: Medium is the best preset that stays playable at 1440p. It delivers an average of 65 FPS with a minimum of 55 FPS. High settings at this resolution drop to 56 FPS average, which falls below the playable threshold.
Q: Is 4K playable with this combination?
A: No. At 3840x2160, none of the four tested presets reach 60 FPS. The highest average is 47 FPS at Low settings, and Ultra drops to 24 FPS. The verdict data lists no playable settings for 4K.
Q: How does the RTX 2060 compare to its nearest rival, the GTX 580?
A: The RTX 2060 and GTX 580 have nearly identical average benchmark scores, 15290 and 15283 respectively, a delta of 0%. In practical terms, the two cards offer similar raw throughput in the database, though the RTX 2060 includes newer feature support.
Q: Does the CPU matter more at lower resolutions?
A: The data suggests the GPU remains the primary constraint even at 1080p. The frame rate spread from 66 FPS at Ultra to 130 FPS at Low is driven by GPU workload, not CPU capability. The Ryzen 9 7900X's performance percentile is far higher than the GPU's, indicating the processor is never the bottleneck.
Q: What is the minimum FPS recorded at 1080p Medium?
A: The minimum FPS at 1080p Medium is 85, with an average of 100 and a maximum of 115. This is the only 1080p preset with min/max data recorded.
Similar Performance Alternatives
Looking at the nearest rivals for the GPU, the RTX 2060's average benchmark score of 15290 is virtually tied with the NVIDIA GeForce GTX 580 at 15283, a delta of 0%. The AMD Radeon 680M scores 15270, just 0.1% behind. The NVIDIA GeForce RTX 3050 OEM sits at 15199, a 0.6% deficit, and the AMD Radeon RX 7600 trails by 0.8% with a score of 15171. In The Technomancer, any of these cards would produce nearly identical frame rates at the same settings and resolution, because the differences in raw score are within a fraction of a percent.
On the CPU side, the Ryzen 9 7900X's average score of 53288 is matched by the AMD EPYC 7313P at 53206, a delta of 0.2%. The Intel Xeon Phi 7290 scores 53469, 0.3% higher, while the Intel Xeon 634 scores 52974, 0.6% lower. The Intel Core i7-14700F is the closest mainstream alternative at 53620, just 0.6% above the Ryzen 9 7900X. Since The Technomancer is GPU-bound for this pairing, swapping the CPU for any of these rivals would produce no measurable change in the frame rates listed in the database.
The practical takeaway is that the RTX 2060's performance class is the deciding factor for this game. A user with a GTX 580, Radeon 680M, RTX 3050 OEM, or RX 7600 would see essentially the same results at every resolution and preset, assuming the rest of the system keeps up. Similarly, the CPU choice among the top rivals is irrelevant for this title, as even the lowest-scoring alternative in the group, the Xeon 634, remains far beyond what The Technomancer's engine can utilize.
Measured FPS Breakdown
At 1920x1080, the RTX 2060 delivers its strongest results. Low settings produce an average of 130 FPS. Medium settings average 100 FPS, with a minimum of 85 and a maximum of 115. High settings average 85 FPS. Ultra settings average 66 FPS, which remains above the 60 FPS playable threshold.
At 2560x1440, performance steps down noticeably. Low settings average 85 FPS. Medium settings average 65 FPS, with a minimum of 55 and a maximum of 75. High settings fall to an average of 56 FPS. Ultra settings average 43 FPS, which is below the playable threshold.
At 3840x2160, the GPU cannot sustain playable frame rates at any preset. Low settings average 47 FPS. Medium settings average 36 FPS, with a minimum of 30 and a maximum of 41. High settings average 31 FPS. Ultra settings average 24 FPS.
The min/max data is only recorded for Medium settings at each resolution. At 1080p Medium, the spread from 85 to 115 FPS shows a 30 FPS range. At 1440p Medium, the spread narrows to 20 FPS, from 55 to 75. At 4K Medium, the range is just 11 FPS, from 30 to 41, indicating that the GPU is running at its ceiling with little headroom for variation.
The Verdict
The data shows a clear answer: this PC can run The Technomancer at 1920x1080 with any preset, including Ultra, since the average of 66 FPS clears the 60 FPS threshold. At 2560x1440, only Low and Medium presets are playable, with Medium being the best option at 65 FPS average. At 3840x2160, no settings preset reaches 60 FPS, so 4K is not playable with this combination.
The verdict by resolution confirms this: 1920x1080 lists High, Low, Medium, and Ultra as playable, with Ultra as the best settings preset at 66 FPS average. At 2560x1440, Low and Medium are playable, with Medium as the best at 65 FPS average. At 3840x2160, the playable settings list is empty, meaning no tested preset achieves the 60 FPS target.
In practical terms, this system is a solid 1080p machine for The Technomancer, a capable 1440p machine when settings are kept at Medium or below, and unsuitable for 4K. The Ryzen 9 7900X provides far more CPU headroom than the game needs, while the RTX 2060 defines the performance envelope. Users targeting smooth gameplay should stick to 1080p for maximum visual fidelity or drop to Medium at 1440p to stay above 60 FPS.