Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
77 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
10.2ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 51,947
Graphics Card
Required 27,947
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 41 54
1440p QHD 50 64 75 98
1080p Full HD 77 98 115 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 150
1920x1080 Medium 115
1920x1080 Ultra 77
2560x1440 High 64
2560x1440 Low 98
2560x1440 Medium 75
2560x1440 Ultra 50
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: The Technomancer on Your System

AMD Ryzen 9 5950X and NVIDIA GeForce RTX 5050 deliver a solid, but resolution-dependent, experience in The Technomancer. The data shows a clear performance ceiling at 4K, while 1440p and 1080p offer smooth gameplay across most presets. This combination of a high-end 16-core desktop CPU with a mainstream 50-series GPU produces a system that is firmly mid-pack for this title, with the GPU acting as the primary bottleneck at higher resolutions.

Measured FPS Breakdown

At 1920x1080, the system performs strongly across all settings. The Low preset reaches an average of 150 FPS, providing a very high refresh-rate experience. Moving to Medium, the average drops to 115 FPS, with reported minimum and maximum values of 98 and 132 FPS, respectively. The High preset maintains an average of 98 FPS. Even the most demanding Ultra preset holds an average of 77 FPS, which remains well above the 60 FPS playability threshold. The scaling from Low to Ultra represents a 73 FPS drop in average frame rate, indicating a significant load increase from the highest preset.

Stepping up to 2560x1440, the performance profile changes notably. The Low preset averages 98 FPS, which is a 52 FPS reduction from the 1080p result. Medium averages 75 FPS, with a recorded minimum of 64 and maximum of 87 FPS. The High preset averages 64 FPS, which is still playable but with much less headroom. The Ultra preset falls below the 60 FPS threshold, averaging 50 FPS. The gap between Low and Ultra at this resolution is 48 FPS, showing that the 1440p resolution amplifies the cost of higher settings.

At 3840x2160, the system struggles to maintain playable frame rates. The Low preset averages 54 FPS, just below the 60 FPS target. Medium averages 41 FPS, with a minimum of 35 and a maximum of 48 FPS. The High preset drops to an average of 35 FPS, and the Ultra preset is the most demanding, averaging 28 FPS. None of the 4K presets reach the 60 FPS playability threshold. The performance delta between Low and Ultra at 4K is 26 FPS, a smaller absolute gap than at lower resolutions, but the entire range sits in unplayable territory.

The data reveals a consistent frame-time pattern. At 1080p and 1440p, the Medium preset provides the only complete set of min/max values, with the 1440p Medium result showing a 23 FPS range between minimum and maximum. This suggests some frame pacing variance, but the averages remain high enough to mask it in overall smoothness. At 4K Medium, the 13 FPS spread between minimum and maximum indicates a tighter, but lower, performance envelope.

CPU and GPU Roles

The performance scaling across resolutions points to the GPU as the dominant constraint. The Ryzen 9 5950X, with its 16 cores and 32 threads, provides substantial compute headroom that is not fully utilized by The Technomancer's engine. The benchmark results show a clear trend: as resolution increases, average FPS decreases proportionally, which is the classic signature of a GPU-bound workload.

The transition from 1080p to 1440p yields a consistent drop in average FPS across all settings, confirming that the RTX 5050's rendering capacity is being saturated. For example, the High preset falls from 98 FPS at 1080p to 64 FPS at 1440p, a 34.7% reduction. The Low preset falls from 150 to 98 FPS, a 34.7% reduction as well. This uniform scaling indicates that the CPU is not a limiting factor; the GPU's pixel throughput and memory bandwidth are the determining elements.

The jump from 1440p to 4K produces an even more severe decline. The High preset drops from 64 to 35 FPS, a 45.3% reduction. This steep degradation at 4K is characteristic of the RTX 5050's 8 GB GDDR6 memory and 128-bit bus being overwhelmed by the higher pixel count. The CPU's role becomes even more passive at this resolution, as the GPU struggles to fill frames regardless of the processor's available headroom.

The Ryzen 9 5950X's single-thread performance, measured at 944 in the 3dmark_single_thread test and 1614 in Cinebench R23 single-core, is more than adequate for this game's engine. The CPU's percentile rank of 91 among all CPUs indicates it is in the top tier of processors. The bottleneck is unambiguously the GPU, as evidenced by the fact that even the Low preset cannot achieve 60 FPS at 4K, a situation that would be improbable if the CPU were the limiting factor.

Similar Performance Alternatives

For the CPU, the AMD Ryzen 9 5950X sits in a tight cluster of comparable processors based on average benchmark scores. The Intel Core Ultra 5 235HX scores 52073, which is 0.2% lower than the Ryzen's average. The AMD EPYC 8124P scores 52121, a 0.3% deficit. The Intel Core i9-13900F scores 51730, putting it 0.4% ahead. The Intel Core i7-14700 scores 52301, which is 0.7% higher. These four rivals all fall within a 0.7% delta of the 5950X's average score, meaning any of them would provide a nearly identical CPU-bound performance profile in The Technomancer.

For the GPU, the NVIDIA GeForce RTX 5050's nearest rivals show a wider spread in average scores. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% lower. The AMD Radeon HD 8970M scores 21237, a 1.0% deficit. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% higher. The NVIDIA RTX A4000 Mobile scores 21379, a 1.6% advantage. In practical terms for this game, these deltas are minor, and a system with any of these GPUs paired with a comparable CPU would produce frame rates within a few FPS of the measured results at each resolution and preset.

The RTX 5050's percentile of 66 among all GPUs places it in the upper-mid range, but the nearest rivals include both integrated and older discrete mobile parts. This indicates that the 5050's raw computational power is not exceptional for its class, and its performance in The Technomancer is largely dictated by its 8 GB memory capacity and 320.0 GB/s bandwidth.

How This Combo Ranks

The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 5050 combination ranks 2269 out of 3696 tested combos for The Technomancer. This places the system in the 61st percentile of all tested combinations, meaning it outperforms a majority of systems but is not in the top tier. The ranking reflects the balance between a very strong CPU and a mid-range GPU; the CPU's high benchmark scores are offset by the GPU's more modest capabilities.

This rank is consistent with the measured FPS data. A combo that cannot achieve 60 FPS at 4K on any preset, but can exceed 60 FPS at 1440p on three presets and at 1080p on all four presets, would logically sit in the upper-middle of the distribution. The rank suggests that many other tested systems, likely with higher-end GPUs, achieve better 4K performance, while this combo's strength lies in the lower resolutions.

The gap between the combo's rank and the CPU's individual percentile of 91 highlights the GPU limitation. If the system were CPU-bound, the rank would likely be higher, closer to the CPU's top-tier status. The fact that the rank is lower indicates that the RTX 5050 is the constraining component for this specific title.

The Verdict

This PC can run The Technomancer, but the experience is heavily dependent on the chosen resolution and preset. At 1920x1080, the system clears the 60 FPS threshold with all four presets, including Ultra at 77 FPS average. This resolution provides a fully playable experience with no compromises.

At 2560x1440, the system remains playable on three presets: High at 64 FPS, Low at 98 FPS, and Medium at 75 FPS. The Ultra preset at 50 FPS is not playable. For users with 1440p monitors, the High preset is the best playable option, offering a comfortable margin above 60 FPS.

At 3840x2160, the system cannot achieve playable frame rates on any preset. The best result is the Low preset at 54 FPS, which falls short of the 60 FPS target. All other presets are significantly lower, with Ultra at 28 FPS. This resolution is not viable for this combination.

The data indicates that the system is well-suited for 1080p gaming with maximum settings and 1440p gaming with high settings. For 4K, the GPU is insufficient to maintain playable performance, regardless of the CPU's capabilities.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 77 FPS. This allows for maximum visual quality while retaining a 17 FPS buffer above the playability threshold.

At 2560x1440, the most demanding playable preset is High, with an average of 64 FPS. This provides a 4 FPS margin over the 60 FPS threshold. The Medium preset at 75 FPS offers more headroom, but High is the best visual quality option that remains playable.

At 3840x2160, no preset reaches the 60 FPS threshold. The best average FPS is achieved on the Low preset at 54 FPS, but this is not playable. There is no recommended setting for this resolution, as all options fail to meet the minimum performance requirement.

FAQ

Q: Can this PC run The Technomancer at 1080p with maximum settings?

A: Yes. At 1920x1080 with the Ultra preset, the system averages 77 FPS, which is above the 60 FPS playable threshold.

Q: What is the best playable preset at 2560x1440?

A: The High preset is the best playable option at 1440p, averaging 64 FPS. The Ultra preset averages 50 FPS and is not playable.

Q: Is 4K gaming possible with this combination?

A: No. At 3840x2160, the highest average FPS is 54 on the Low preset, which is below the 60 FPS target. All other presets are lower.

Q: How does the RTX 5050 compare to the AMD Radeon RX 5600 XT?

A: The RTX 5050 has an average benchmark score of 21035, while the RX 5600 XT scores 20713, which is 1.6% lower. Performance in-game would be similar.

Q: What is the combo's ranking among tested systems for this game?

A: This CPU and GPU combination ranks 2269 out of 3696 tested combos, placing it in the upper-middle range.

Q: At 1440p Medium, what are the minimum and maximum frame rates?

A: The Medium preset at 2560x1440 reports an average of 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. The minimum is still above the 60 FPS threshold.