Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 45 | 53 | 69 |
| 1440p QHD | 64 | 82 | 96 | 125 |
| 1080p Full HD | 98 | 125 | 147 | 191 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
Best Settings per Resolution
At 3840x2160, the data identifies Low as the only playable setting, delivering an average of 69 FPS. High dips to 45 FPS average, Medium sits at 53 FPS (with a minimum of 45 FPS), and Ultra drops to 35 FPS — none of these clear the 60 FPS threshold. The verdict is unambiguous: at 4K, this combination cannot sustain playable framerates beyond the lowest preset.
At 2560x1440, the picture changes dramatically. Ultra is the best playable setting, with an average of 64 FPS. This is a comfortable margin above the 60 FPS threshold, and it means the RTX 3070 plus Ryzen 7 9700F can run the game at maximum visual quality at 1440p. High averages 82 FPS, Medium 96 FPS, and Low 125 FPS, so there is headroom for higher refresh rates if the user drops settings.
At 1920x1080, Ultra is again the best playable setting, with an average of 98 FPS. This is nearly 40% above the 60 FPS threshold, indicating that 1080p is well within the capabilities of this hardware. High hits 125 FPS, Medium 147 FPS, and Low reaches 191 FPS — the latter being more than three times the playable threshold.
The pattern is clear: this PC scales from "playable only at Low" at 4K to "excellent at Ultra" at 1080p.
CPU and GPU Roles
The data reveals how the balance of CPU and GPU load shifts across resolutions. At 3840x2160, the GPU is clearly the limiting factor — the framerate drops from 69 FPS at Low to 35 FPS at Ultra, a 49% reduction driven entirely by pixel-pushing workload. The CPU, a Ryzen 7 9700F with 8 cores and 16 threads, is unlikely to be the bottleneck at this resolution, as the GPU is saturated by the 8.3 million pixels of 4K.
At 2560x1440, the scaling is more moderate: Low produces 125 FPS, Medium 96 FPS, and Ultra 64 FPS. The drop from Low to Ultra is 49%, but the absolute numbers are high enough that both components are contributing. The CPU's single-thread performance (PassMark single-thread score of 4691) and multi-thread capability (PassMark multithread score of 36470) are sufficient to feed the GPU at these framerates.
At 1920x1080, the CPU's role becomes more prominent. Low produces 191 FPS, which is a very high framerate that requires strong CPU throughput. The Ryzen 7 9700F's PassMark multithread score of 36470 and floating-point math score of 77955 indicate it can handle this load. The GPU, meanwhile, has more headroom — the RTX 3070's PassMark G3D score of 22214 shows it is capable of high framerates at 1080p.
The resolution scaling tells a consistent story: at 4K the GPU is the sole constraint; at 1440p both components are balanced; at 1080p the CPU becomes more relevant but neither component is overwhelmed. The data shows no resolution where the CPU holds back the GPU below the playable threshold.
Measured FPS Breakdown
3840x2160:
- Ultra: Average 35 FPS. This is the lowest measured result in the entire dataset, roughly half the playable threshold.
- High: Average 45 FPS. A 29% improvement over Ultra, but still below 60 FPS.
- Medium: Average 53 FPS, with a minimum of 45 FPS and maximum of 61 FPS. The minimum is concerning — it suggests occasional dips well below the average.
- Low: Average 69 FPS. This is the only 4K setting that clears 60 FPS, and it does so with a 15% margin.
2560x1440:
- Ultra: Average 64 FPS. This clears the threshold by a slim 4 FPS margin, which is notable since it is the maximum quality preset.
- High: Average 82 FPS. A 28% improvement over Ultra.
- Medium: Average 96 FPS, with a minimum of 82 FPS and maximum of 110 FPS. The minimum is still well above 60 FPS.
- Low: Average 125 FPS. This is more than double the Ultra average.
1920x1080:
- Ultra: Average 98 FPS. This is a strong result for maximum quality at the most common resolution.
- High: Average 125 FPS. A 28% gain over Ultra.
- Medium: Average 147 FPS, with a minimum of 125 FPS and maximum of 169 FPS. The consistency is excellent.
- Low: Average 191 FPS. This approaches the 200 FPS mark and shows the ceiling of this combination.
The measured data shows a consistent scaling pattern across all three resolutions: Low to Medium yields roughly a 28-35% framerate increase, Medium to High a 15-18% decrease, and High to Ultra a 22-28% decrease. This is a typical curve for a GPU-bound scenario, confirming the RTX 3070 is the primary performance driver.
The Verdict
Can this PC run The Technomancer? The answer depends entirely on the target resolution.
At 3840x2160: The verdict is marginal. The only playable setting is Low, with an average of 69 FPS. Medium, High, and Ultra all fail to reach 60 FPS. If the user insists on 4K, they must accept the lowest visual quality preset. This is a playable experience, but not a good one.
At 2560x1440: The verdict is a clear yes. All four settings — Low, Medium, High, and Ultra — clear the 60 FPS threshold. The best setting is Ultra at 64 FPS average. This means the user can experience the game at maximum quality with playable framerates. The margin is slim at Ultra (4 FPS above threshold), but it is sufficient.
At 1920x1080: The verdict is an emphatic yes. Ultra averages 98 FPS, which is 63% above the playable threshold. Even the most demanding preset leaves substantial headroom. Users targeting 144 Hz displays can achieve that with High settings (125 FPS), and Medium or Low push even higher.
The data supports a simple conclusion: this PC is a 1080p and 1440p machine for The Technomancer, and a 4K machine only at minimal settings.
Similar Performance Alternatives
The CPU and GPU each have nearest rivals that would behave similarly in this game.
CPU alternatives: The AMD Ryzen 7 9700F sits in the 94th percentile of all CPUs, with an average benchmark score of 69996. Its nearest rivals are tightly clustered:
- The AMD Ryzen 9 7940HX scores 69875, a delta of 0.2% — effectively identical performance.
- The Intel Core i7-14700KF scores 70163, a delta of -0.2% — again, a statistical tie.
- The AMD Ryzen 9 7950X scores 69515, a delta of 0.7%.
- The Intel Core i7-14700K scores 69355, a delta of 0.9%.
All four rivals are within 1% of the Ryzen 7 9700F's average score. In practical terms, swapping to any of these CPUs would produce indistinguishable framerates in The Technomancer, since the game's CPU load is handled equally well by all of them.
GPU alternatives: The NVIDIA GeForce RTX 3070 is in the 61st percentile of all GPUs, with an average benchmark score of 17208. Its nearest rivals are also closely matched:
- The AMD Radeon RX 7600 XT scores 17083, a delta of 0.7%.
- The NVIDIA GeForce GTX 690 scores 17037, a delta of 1%.
- The AMD Radeon HD 7970M scores 17019, a delta of 1.1%.
- The NVIDIA Tesla K40c scores 17468, a delta of -1.5%.
The RX 7600 XT is the most relevant modern alternative — a 0.7% delta means it would produce nearly identical framerates at every resolution and preset. The GTX 690 and HD 7970M are older parts but benchmark within 1.1%, suggesting they would also deliver comparable performance, though their driver support and feature sets differ. The Tesla K40c is a compute-oriented card, but its 1.5% delta indicates similar raw throughput.
For the user, the key takeaway is that the RTX 3070's performance class is stable — any of these rivals would reproduce the measured FPS numbers within a few percent.
How This Combo Ranks
The AMD Ryzen 7 9700F + NVIDIA GeForce RTX 3070 combination ranks 1578 out of 3696 tested combos in The Technomancer. This places it in the 57th percentile of all combinations tested — comfortably above the median, but not in the top tier.
The rank reflects the combination of a top-tier CPU (94th percentile) with a mid-range GPU (61st percentile). The CPU is clearly not the limiting factor; the GPU's 61st percentile ranking pulls the overall combo down from what the CPU alone would suggest. This is consistent with the measured FPS data, which shows the GPU being the bottleneck at 4K.
At 1440p and 1080p, the combo's rank is more than adequate — the measured framerates at Ultra settings (64 FPS and 98 FPS respectively) are evidence that the hardware is well-matched for these resolutions. The 4K results, where only Low settings are playable, are the weakest aspect of this pairing.
The rank of 1578 out of 3696 also indicates that a substantial portion of tested combos perform better, likely those with higher-tier GPUs. However, for the target use case of 1080p and 1440p gaming, this combo delivers solid results. The data supports a verdict of "capable but not exceptional" — a mid-pack ranking that outperforms most systems while trailing the high-end configurations that dominate the top quartile.