The Technomancer

The AMD Ryzen 7 7700 paired with the NVIDIA GeForce RTX 4070 delivers a comprehensive range of performance in The Technomancer, with measured frame rates spanning from a demanding 41.1 FPS at 4K Ultra to a fluid 229.5 FPS at 1080p Low. The data shows a system that is clearly capable of exceeding the 60 FPS playable threshold at most settings, with the primary limitation appearing only at the highest resolution and preset combination. Benchmark results indicate a consistent scaling pattern where lower resolutions and reduced graphical fidelity yield substantial frame rate gains, making this combination adaptable to various display setups.

Measured FPS Breakdown

The measured FPS data for this combination covers three resolutions and four quality presets, providing a complete picture of its performance envelope. At 3840x2160, the average frame rates start at 83.5 FPS on Low settings, drop to 66.8 FPS on Medium, further decline to 53.1 FPS on High, and reach a minimum of 41.1 FPS on Ultra. This represents a steep performance curve at 4K, where the jump from Low to Ultra costs approximately 42.4 FPS, or a 50.8% reduction in average frame rate. The system handles 4K Medium comfortably, but 4K High and Ultra fall below the 60 FPS playable threshold, indicating that this resolution requires careful settings management.

Moving to 2560x1440, the performance improves significantly across all presets. Low settings produce an average of 151.2 FPS, Medium reaches 117.9 FPS, High achieves 99.8 FPS, and Ultra maintains a solid 75.7 FPS. The scaling from Low to Ultra at 1440p shows a 75.5 FPS drop, which is proportionally similar to the 4K results but starts from a much higher baseline. Every preset at this resolution clears the 60 FPS threshold with substantial headroom, making 1440p the resolution where this combination can run unrestricted at maximum quality.

At 1920x1080, the system demonstrates its peak capabilities. Low settings deliver an exceptional 229.5 FPS average, Medium produces 181.8 FPS, High reaches 150.6 FPS, and Ultra still achieves 120.2 FPS. The performance gap between Low and Ultra at 1080p is 109.3 FPS, showing that even the most demanding preset leaves considerable performance on the table. All four presets at 1080p provide frame rates that would satisfy high-refresh-rate displays, with the lowest average still doubling the 60 FPS playable threshold.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains at least 60 FPS average determines the best playable settings. At 3840x2160, the best settings are Medium, which achieves an average of 66.8 FPS. This provides a comfortable margin above the 60 FPS threshold while offering better visual quality than Low. High settings at 4K fall to 53.1 FPS, missing the playable threshold by a notable margin, and Ultra drops further to 41.1 FPS, making both presets unsuitable for smooth gameplay at this resolution.

At 2560x1440, the best settings are Ultra, with an average of 75.7 FPS. This is the highest quality preset available in the data, and it still maintains a 15.7 FPS buffer above the playable threshold. The system has enough performance headroom at 1440p that even the most demanding settings remain viable, eliminating the need for any visual compromises. High settings at 1440p produce 99.8 FPS, Medium reaches 117.9 FPS, and Low achieves 151.2 FPS, but none of these are necessary since Ultra already exceeds the threshold.

At 1920x1080, the best settings are also Ultra, delivering an average of 120.2 FPS. This more than doubles the 60 FPS playable threshold, providing an exceptionally smooth experience at maximum quality. The system has such abundant performance at 1080p that every preset, from Low at 229.5 FPS to Ultra at 120.2 FPS, comfortably exceeds the playable threshold. The choice of settings at 1080p becomes a matter of preference rather than necessity, as even the most demanding option leaves significant performance in reserve.

How This Combo Ranks

The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4070 combination ranks 923rd out of 3696 tested combos for The Technomancer, placing it in the top 25% of all configurations in the database. This rank reflects the strong overall performance of the pairing, though it does not place it among the elite tier of systems. The percentile data for the individual components supports this positioning: the CPU ranks in the 87th percentile against all CPUs, while the GPU ranks in the 81st percentile against all GPUs. The combination of two high-percentile components results in a system that outperforms the majority of tested configurations but leaves room for higher-end hardware above it.

The rank of 923 out of 3696 indicates that approximately 2773 tested combinations perform worse than this setup in The Technomancer, while 922 combinations perform better. This places the system in a strong position for the game, particularly considering that the measured FPS data shows it can handle the game at high settings across most resolutions. The ranking considers the aggregate performance across all tested scenarios, and the data suggests that the system's main limitation is at 4K Ultra, where the frame rate drops below the playable threshold. For users targeting 1080p or 1440p displays, this combination ranks even more favorably in practical terms, as it can run the game at maximum settings with frame rates well above 60 FPS.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 7 7700, based on average benchmark scores, include the AMD Ryzen AI 9 365 with a score of 40048 and a delta of 0.1%, the Intel Core 5 221E with a score of 40144 and a delta of -0.2%, the AMD Ryzen 9 270 with a score of 40246 and a delta of -0.4%, and the Intel Core i9-13905H with a score of 40313 and a delta of -0.6%. These CPUs all fall within a 0.7% performance band of the Ryzen 7 7700, indicating that swapping to any of these would result in nearly identical frame rates in The Technomancer, provided the GPU remains the same.

For the NVIDIA GeForce RTX 4070, the nearest rivals are the NVIDIA Tesla P4 with an average score of 37628 and a delta of 0.1%, the AMD Radeon RX Vega 56 with a score of 37507 and a delta of 0.4%, the NVIDIA GeForce RTX 4080 Mobile with a score of 38135 and a delta of -1.3%, and the AMD Radeon PRO W6400 with a score of 37157 and a delta of 1.3%. The performance differences between these GPUs are minimal, ranging from -1.3% to +1.3% relative to the RTX 4070. In practical terms, a system with the Ryzen 7 7700 and any of these GPUs would produce nearly identical FPS numbers in The Technomancer, with the RTX 4080 Mobile being the closest match at 1.3% faster and the Radeon PRO W6400 being 1.3% slower.

CPU and GPU Roles

The scaling between resolutions and presets reveals how the CPU and GPU each contribute to performance in The Technomancer. At 1920x1080, the frame rates are exceptionally high, with Low settings reaching 229.5 FPS and Ultra still achieving 120.2 FPS. The large gap between Low and Ultra at 1080p indicates that the GPU is the primary bottleneck at lower resolutions, as the CPU has more than enough headroom to feed frames at these rates. The Ryzen 7 7700, with its 8 cores and 16 threads, provides ample processing power for the game's logic at 1080p, allowing the RTX 4070 to operate at its full potential.

As the resolution increases to 2560x1440, the frame rates drop across all presets, but the relative scaling remains consistent. Low settings produce 151.2 FPS, a 34.1% reduction from 1080p Low, while Ultra produces 75.7 FPS, a 37.0% reduction from 1080p Ultra. This proportional decrease across all presets suggests that the GPU is becoming more of a limiting factor at 1440p, as the additional pixel count requires more graphics processing power. The CPU still has sufficient headroom at this resolution, as evidenced by the high frame rates on lower presets.

At 3840x2160, the GPU becomes the dominant constraint. Low settings drop to 83.5 FPS, Medium to 66.8 FPS, High to 53.1 FPS, and Ultra to 41.1 FPS. The scaling from 1440p to 4K shows a more pronounced decline, with Low settings falling 44.8% and Ultra falling 45.7%. This steep drop indicates that the RTX 4070 is being pushed to its limits at 4K, while the CPU's role diminishes as the GPU becomes the clear bottleneck. The data shows that this combination is well-balanced for 1080p and 1440p gaming, with the CPU and GPU working in harmony, but at 4K, the GPU's limitations are exposed, particularly at higher presets.

FAQ

Q: Can this system run The Technomancer at 4K?

A: Yes, but only at Low or Medium settings. The measured data shows 83.5 FPS at 4K Low and 66.8 FPS at 4K Medium, both exceeding the 60 FPS playable threshold. High settings at 4K drop to 53.1 FPS and Ultra to 41.1 FPS, which are below the threshold.

Q: What is the best quality preset at 1440p?

A: Ultra settings at 2560x1440 produce an average of 75.7 FPS, which is the highest quality preset tested and still maintains a comfortable margin above the 60 FPS playable threshold. This makes Ultra the best choice for 1440p displays.

Q: How does this combination rank against other tested systems?

A: The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4070 combination ranks 923rd out of 3696 tested combos for The Technomancer, placing it in the top 25% of all configurations. The CPU ranks in the 87th percentile and the GPU in the 81st percentile individually.

Q: What frame rate can I expect at 1080p Ultra?

A: At 1920x1080 with Ultra settings, the system achieves an average of 120.2 FPS, which is double the 60 FPS playable threshold. This provides a highly smooth experience at maximum quality settings.

Q: Which component is more important for this game at 1080p?

A: At 1080p, the GPU is the primary factor, as frame rates range from 229.5 FPS on Low to 120.2 FPS on Ultra. The CPU has sufficient headroom at this resolution to avoid becoming a bottleneck, allowing the RTX 4070 to fully express its capabilities.

Q: Are there any settings below 60 FPS at 1440p?

A: No. All four presets at 2560x1440 exceed the 60 FPS threshold, with the lowest being Ultra at 75.7 FPS and the highest being Low at 151.2 FPS. Every tested setting at 1440p is playable.

The Verdict

The data confirms that the AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4070 can run The Technomancer effectively across most resolutions and settings. At 1920x1080, the system clears the 60 FPS threshold at every preset, with the best settings being Ultra at 120.2 FPS average. This resolution provides the most headroom, allowing for maximum visual quality without any performance concerns. At 2560x1440, the system also clears 60 FPS at every preset, with Ultra achieving 75.7 FPS average, making this the resolution where the system delivers the best balance of visual fidelity and performance.

At 3840x2160, the system can only maintain 60 FPS at Low and Medium settings, with averages of 83.5 FPS and 66.8 FPS respectively. High settings fall to 53.1 FPS and Ultra to 41.1 FPS, both below the playable threshold. For 4K gaming, users must accept reduced settings to achieve smooth frame rates. Overall, this combination is well-suited for 1080p and 1440p gaming at maximum quality, and it offers workable 4K performance at Medium settings. The system's ranking in the top 25% of tested combos, combined with its strong measured FPS data, makes it a reliable choice for playing The Technomancer at high frame rates on standard resolution displays.