The Technomancer

The AMD Ryzen 7 7700 paired with the Intel Arc B570 delivers a performance profile for The Technomancer that is heavily dictated by resolution and preset selection. The data indicates a clear hierarchy: 1080p is fully playable across all settings, 1440p is playable only at Medium or below, and 4K falls short of the 60 FPS threshold at every tested setting. The following analysis breaks down the measured frame rates, component roles, and practical recommendations based strictly on the provided benchmark data.

Measured FPS Breakdown

At 1920x1080, the combination demonstrates its strongest results. With Low settings, the average frame rate reaches 121 FPS, which is the highest recorded across any resolution and preset combination. Moving to Medium produces an average of 93 FPS, with a minimum of 79 FPS and a maximum of 107 FPS, indicating solid frame time consistency. High settings yield an average of 80 FPS, while Ultra remains above the 60 FPS playability threshold with an average of 62 FPS. None of the 1080p measurements dip below the 60 FPS benchmark in their average values.

At 2560x1440, the performance drop is significant but still allows for playable configurations. Low settings produce an average of 79 FPS, comfortably above the threshold. Medium settings average 61 FPS, with a minimum of 52 FPS and a maximum of 70 FPS, meaning the average clears 60 FPS but frame dips will occasionally fall below it. High settings drop to an average of 52 FPS, which fails the playability criterion, and Ultra falls further to 41 FPS. The transition from 1080p to 1440p at Medium settings represents a reduction from 93 FPS to 61 FPS, a 34% decrease in average frame rate.

At 3840x2160, none of the tested settings reach the 60 FPS threshold. Low settings provide the best result with an average of 44 FPS. Medium averages 33 FPS, with a minimum of 28 FPS and a maximum of 39 FPS. High settings average 29 FPS, and Ultra drops to 22 FPS. The data shows that even the least demanding preset at 4K falls short of playable performance by a substantial margin, with the gap between 4K Low and the 60 FPS threshold being 16 FPS.

CPU and GPU Roles

The frame rate scaling across resolutions provides insight into which component limits performance at each setting. The Ryzen 7 7700 is a high-end desktop processor with 8 cores and 16 threads, a boost clock of 5.30 GHz, and a Cinebench R23 multi-core score of 18760, placing it in the 87th percentile of all CPUs. The Arc B570 is a mid-range GPU with 2304 shading units, a 160-bit memory bus, and 380.0 GB/s of memory bandwidth, ranking in the 65th percentile of all GPUs. These specifications suggest the GPU is the limiting factor at higher resolutions.

At 1080p, the average FPS ranges from 62 (Ultra) to 121 (Low), and the scaling between settings is steep. The difference between Low and Ultra is 59 FPS, which indicates that the GPU is heavily taxed by the higher presets even at the lowest resolution. However, the fact that 1080p Ultra still clears 60 FPS suggests the CPU is providing sufficient headroom, and the GPU's performance ceiling is the primary constraint. The Arc B570's PassMark G3D score of 14195 aligns with this interpretation.

When moving from 1080p to 1440p, the average FPS at Medium drops from 93 to 61, a reduction of 32 FPS. This 44% resolution increase in pixel count results in a 34% frame rate loss, consistent with a GPU-bound scenario. The CPU's role diminishes at higher resolutions, as the render load grows faster than the CPU's ability to feed the GPU. The Ryzen 7 7700's strong single-threaded performance, evidenced by a 3DMark single-thread score of 1049 and a Geekbench single-core score of 2525, ensures it does not become a bottleneck at 1440p or 4K.

At 4K, the GPU is clearly the dominant constraint. The average FPS at Medium is 33, and even Low settings only reach 44 FPS. The Arc B570's 10 GB of GDDR6 memory and 160-bit bus width are insufficient for the bandwidth demands of 4K rendering in this game. The CPU's contribution is negligible at this resolution, as the GPU's raw throughput and memory bandwidth are the limiting factors. The scaling from 1440p Medium (61 FPS) to 4K Medium (33 FPS) represents a 46% frame rate reduction for a 125% increase in pixel count, indicating that the GPU's fill rate and memory bandwidth are saturated.

FAQ

Q: Can this PC run The Technomancer at 60 FPS on a 1080p monitor?

A: Yes. All four tested presets at 1920x1080 exceed the 60 FPS threshold. The lowest average is 62 FPS at Ultra settings, while Low settings reach 121 FPS.

Q: Is the Intel Arc B570 the limiting factor at 1440p?

A: The data supports this. At 2560x1440, only Low and Medium settings average above 60 FPS (79 FPS and 61 FPS, respectively). High settings drop to 52 FPS, and Ultra falls to 41 FPS, indicating the GPU's performance ceiling is reached between Medium and High.

Q: What is the best playable setting at 1440p?

A: Medium is the most demanding preset that maintains an average above 60 FPS, with an average of 61 FPS. However, the minimum FPS is 52, so occasional dips below 60 FPS will occur.

Q: Is 4K gaming feasible with this hardware configuration?

A: No. The highest average FPS at 3840x2160 is 44 FPS on Low settings. Medium averages 33 FPS, High averages 29 FPS, and Ultra averages 22 FPS. None of these meet the 60 FPS playability threshold.

Q: How does this CPU-GPU combination compare to similar hardware?

A: The Ryzen 7 7700's average benchmark score of 40081 is nearly identical to the AMD Ryzen AI 9 365 (40048, 0.1% delta) and the Intel Core 5 221E (40144, -0.2% delta). The Arc B570's average score of 20556 is within 0.1% of the NVIDIA GeForce RTX 3070 Mobile (20534) and 0.1% below the Intel Arc A750 (20582).

The Verdict

The benchmark data provides a clear answer: this PC can run The Technomancer at 60 FPS, but only at specific resolutions and settings. At 1920x1080, all presets from Low to Ultra clear the 60 FPS threshold, with Ultra averaging 62 FPS. At 2560x1440, the playable settings are limited to Low (79 FPS) and Medium (61 FPS), while High (52 FPS) and Ultra (41 FPS) fall short. At 3840x2160, no settings achieve playable performance; the best result is 44 FPS on Low.

For users with a 1080p monitor, the configuration is fully capable, and Ultra settings are viable. For 1440p users, Medium is the highest playable preset, but frame dips below 60 FPS are expected based on the minimum of 52 FPS. 4K gaming is not recommended, as even the lowest preset fails to reach 60 FPS by a margin of 16 FPS.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 7 7700 indicate that users seeking similar CPU performance could consider the AMD Ryzen AI 9 365, which scores 0.1% higher in average benchmarks, or the Intel Core 5 221E, which is 0.2% lower. The AMD Ryzen 9 270 is 0.4% higher, and the Intel Core i9-13905H is 0.6% lower. These deltas are negligible, meaning any of these CPUs would produce nearly identical frame rates in The Technomancer when paired with the same GPU.

For the Intel Arc B570, the closest GPU alternatives are the NVIDIA GeForce RTX 3070 Mobile (0.1% higher average score) and the Intel Arc A750 (0.1% lower). The NVIDIA Quadro M4000M is 0.4% higher, and the AMD Radeon R9 M390X is 0.5% lower. These results suggest that swapping the Arc B570 for any of these GPUs would yield essentially the same FPS in this game, with differences of less than 1% in synthetic benchmarks.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average frame rate of 62 FPS. This is the highest visual quality available while maintaining playability.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, with an average frame rate of 61 FPS. Users should be aware that the minimum FPS of 52 indicates some stutter during intense scenes.

At 3840x2160, there is no playable setting. The closest option is Low, which averages 44 FPS, but this falls short of the 60 FPS threshold by a significant margin.

How This Combo Ranks

The combination of the AMD Ryzen 7 7700 and Intel Arc B570 ranks 2972nd out of 3696 tested combos for The Technomancer. This places it in the bottom 20% of all configurations, reflecting the GPU's limited performance at higher resolutions. The ranking is primarily driven by the Arc B570's 65th percentile standing among all GPUs, while the CPU's 87th percentile ranking indicates it is not the bottleneck. Users considering this build should prioritize resolution targets: 1080p is fully supported, 1440p is marginal at Medium settings, and 4K is not viable. The data suggests that upgrading the GPU would yield more significant performance gains than upgrading the CPU for this title.