Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 35 | 41 | 54 |
| 1440p QHD | 50 | 64 | 75 | 98 |
| 1080p Full HD | 77 | 98 | 115 | 150 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 5050 delivers a performance profile in The Technomancer that is heavily dependent on resolution and preset selection. Measured data indicates that this combination scales from a smooth high-refresh experience at 1920x1080 to an unplayable state at 3840x2160 with maximum settings, with the key differentiator being the GPU's ability to maintain frame rates as pixel count increases.
Measured FPS Breakdown
At 1920x1080, the combination delivers strong performance across all tested presets. The Low preset achieves an average of 150 FPS, representing the highest headroom available. Moving to Medium, the average drops to 115 FPS, with a measured minimum of 98 FPS and maximum of 132 FPS. The High preset produces an average of 98 FPS, while the Ultra preset still manages a solid 77 FPS average. All four presets at this resolution maintain an average well above the 60 FPS playable threshold.
At 2560x1440, performance remains respectable but begins to show strain. The Low preset averages 98 FPS, matching the 1080p High result. Medium drops to a 75 FPS average, with a minimum of 64 FPS and maximum of 87 FPS. High stays playable at 64 FPS average, but Ultra falls to 50 FPS, failing the 60 FPS threshold. This resolution represents the boundary where the RTX 5050 starts to become the limiting factor under higher graphical loads.
At 3840x2160, the picture changes dramatically. The Low preset averages 54 FPS, just below playability. Medium averages 41 FPS, with a minimum of 35 FPS and maximum of 48 FPS. High averages 35 FPS, and Ultra averages only 28 FPS. No preset at this resolution clears the 60 FPS mark, indicating that the hardware cannot sustain playable frame rates at 4K regardless of settings.
Similar Performance Alternatives
The benchmark database places the AMD Ryzen 7 5800XT at the 81st percentile among all CPUs, with a 0% delta against the AMD Ryzen 7 7840H (average score 29868). The AMD Ryzen 7 8845HS and AMD Ryzen 7 7840HS both score 29955, representing a -0.3% delta relative to the 5800XT. The AMD Ryzen 5 9600X scores 29713, a 0.6% delta. In practice, a system using any of these processors would exhibit nearly identical CPU-bound behavior in The Technomancer, with performance differences of less than one percent.
For the GPU, the NVIDIA GeForce RTX 5050 sits at the 66th percentile among all GPUs. Its closest rival is the AMD Radeon RX Vega M GL with an average score of 21153, a -0.6% delta. The AMD Radeon HD 8970M scores 21237, a -1% delta, while the NVIDIA RTX A4000 Mobile scores 21379, also a -1.6% delta. The AMD Radeon RX 5600 XT scores 20713, a 1.6% delta, meaning it would perform slightly worse. These rivals suggest that frame rates within a 2% margin of the RTX 5050's results would be expected from any of these GPUs, though the exact FPS values in the measured data would shift by only a frame or two.
CPU and GPU Roles
The data shows a clear division of labor between the Ryzen 7 5800XT and RTX 5050 depending on resolution. At 1920x1080, the CPU's 8-core, 16-thread configuration with a 4.80 GHz boost clock provides ample processing power, allowing the GPU to reach 150 FPS on Low. The scaling from Low to Ultra at this resolution shows a drop of 73 FPS (from 150 to 77), indicating that the GPU is fully engaged in rendering the higher-detail settings.
At 2560x1440, the gap between presets narrows in absolute terms but widens in percentage. From Low (98 FPS) to Ultra (50 FPS), the drop is 48 FPS, but the relative decline is similar to 1080p. The fact that Ultra falls below 60 FPS while High stays at 64 FPS suggests the GPU is nearing its rendering capacity, with the CPU still not being the primary constraint.
At 3840x2160, the GPU becomes the dominant bottleneck. Even the Low preset (54 FPS) fails to reach 60 FPS, and the scaling from Low to Ultra (54 to 28 FPS) represents a 48% reduction in performance. The CPU's role diminishes as the pixel fill rate and memory bandwidth of the RTX 5050—8 GB GDDR6 on a 128-bit bus with 320.0 GB/s—become the limiting factors. The Ryzen 7 5800XT's benchmark scores, including a Cinebench R23 multi-core result of 23794, are sufficient to feed the GPU at all resolutions, but the GPU cannot keep up with 4K workloads.
The Verdict
According to the verdict by resolution data, this system is not playable at 3840x2160 under any tested preset, as no settings are listed as playable and the best average FPS across all presets is 54 on Low, which falls short of the 60 FPS threshold.
At 2560x1440, the system is playable on High, Low, and Medium presets. The best playable setting is High, achieving an average of 64 FPS. The Ultra preset is not viable, averaging only 50 FPS.
At 1920x1080, the system is playable on all four presets: High (98 FPS), Low (150 FPS), Medium (115 FPS), and Ultra (77 FPS). The best playable setting is Ultra with an average of 77 FPS.
In summary, this PC can run The Technomancer at 1080p with maximum settings and at 1440p with High settings, but it cannot sustain 60 FPS at 4K under any configuration.
How This Combo Ranks
Among the 3696 tested combinations in the benchmark database, this specific CPU-GPU pairing ranks 2269th for The Technomancer. This places it in the lower half of all tested systems, which is consistent with the GPU's 66th percentile standing among all GPUs. The CPU's 81st percentile ranking is notably higher, confirming that the RTX 5050 is the performance limiter in this pairing. The rank of 2269 suggests that a substantial number of combinations with more powerful GPUs would outperform this system, particularly at higher resolutions where the GPU bottleneck is most pronounced.
Best Settings per Resolution
At 1920x1080, the most demanding preset that maintains an average at or above 60 FPS is Ultra, which delivers 77 FPS. This provides a 17 FPS margin over the playability threshold, making it a safe choice for consistent performance.
At 2560x1440, the best playable setting is High, averaging 64 FPS. This leaves only a 4 FPS margin, so users seeking extra stability might prefer Medium at 75 FPS, which offers an 11 FPS larger buffer.
At 3840x2160, no preset clears the 60 FPS threshold. The closest is Low at 54 FPS, which falls 6 FPS short. Users at this resolution would need to consider reducing resolution or accepting sub-60 FPS performance.
FAQ
Q: Can this system run The Technomancer at 4K with High settings?
A: No. At 3840x2160 with High settings, the average FPS is 35, which is 25 FPS below the 60 FPS playable threshold. The best 4K result is 54 FPS on Low settings, still below playability.
Q: What is the highest preset that stays above 60 FPS at 1440p?
A: High settings at 2560x1440 produce an average of 64 FPS, making it the most demanding playable preset at that resolution. Ultra drops to 50 FPS and is not playable.
Q: How does the RTX 5050 compare to its closest GPU rival?
A: The RTX 5050's average benchmark score is 21035, while the AMD Radeon RX Vega M GL scores 21153, a -0.6% delta. The AMD Radeon HD 8970M scores 21237 (-1%), and the NVIDIA RTX A4000 Mobile scores 21379 (-1.6%). The AMD Radeon RX 5600 XT scores 20713, a 1.6% delta, indicating it would perform slightly worse.
Q: What is the best 1080p preset for maximum visual quality?
A: Ultra settings at 1920x1080 achieve an average of 77 FPS, which is the highest quality preset that maintains a 60+ FPS average. This leaves a 17 FPS margin above the threshold.
Q: Is the CPU or GPU more responsible for the 4K performance drop?
A: The GPU is the primary bottleneck at 3840x2160. The Ryzen 7 5800XT ranks at the 81st percentile among CPUs, but the RTX 5050 only reaches the 66th percentile among GPUs. The GPU's 8 GB memory and 320.0 GB/s bandwidth are insufficient for 4K workloads, as evidenced by the 54 FPS Low preset result.
Q: How many tested combinations perform better than this system in The Technomancer?
A: This combo ranks 2269th out of 3696 tested combinations, meaning 1427 combinations outperform it. This places it in the lower 61.4% of all tested systems for this game.