Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 70 | 82 | 107 |
| 1440p QHD | 100 | 128 | 149 | 195 |
| 1080p Full HD | 152 | 195 | 229 | 254 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
# AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 4080: The Technomancer Performance Analysis
The Technomancer is a demanding action RPG that leverages the Unreal Engine to deliver dense, physics-driven combat and a detailed dystopian world. Its performance profile stresses both CPU physics and GPU rendering, making it a strong multi-threaded and graphics-heavy benchmark. This analysis examines the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 4080 combo across a range of resolutions and presets.
Measured FPS Breakdown
The measured data reveals a clear performance hierarchy across resolutions. At 4K (3840x2160), the system delivers an average of 70 FPS at High settings, with a minimum of 70 FPS observed. Dropping to Low settings provides a significant headroom boost to 107 FPS average. The Medium preset sits squarely between them at 82 FPS average, with a minimum of 70 and a maximum of 94 FPS. The Ultra preset is the most demanding, producing an average of 55 FPS, which falls below the 60 FPS playability threshold.
At 1440p (2560x1440), the performance curve shifts dramatically upward. The Ultra preset achieves an average of 100 FPS, while High settings reach 128 FPS average. Low and Medium settings produce 195 and 149 FPS averages, respectively, with Medium showing a minimum of 127 and a maximum of 172 FPS.
At 1080p (1920x1080), the system shows its full strength. The Ultra preset yields a 152 FPS average, with High and Medium presets at 195 and 229 FPS averages. The Low preset peaks at 254 FPS average, while Medium shows a floor of 194 FPS and a ceiling of 263 FPS.
CPU and GPU Roles
The data indicates a balanced workload between the AMD Ryzen 7 5800XT and the NVIDIA GeForce RTX 4080. At 4K Ultra settings, the 55 FPS average is a GPU-bound scenario, where the RTX 4080's 9728 shading units and 304 tensor cores are the decisive factor. The 70 FPS at High settings shows the same GPU limitation, as the gap between High (70 FPS) and Ultra (55 FPS) is substantial, while the gap between High and Medium (82 FPS) is smaller.
At 1440p, the dynamic shifts. The Ultra preset at 100 FPS demonstrates the GPU is still the primary engine, but the CPU's 8-core, 16-thread configuration becomes more relevant. The 128 FPS at High settings versus 149 FPS at Medium shows a 21 FPS jump, indicating some CPU dependency begins to appear at lower resolutions, though the GPU still carries the majority of the load.
At 1080p, the data shows a more balanced load. The Ultra preset's 152 FPS is still high, but the jump from Medium (229 FPS) to High (195 FPS) is a 34 FPS difference, with Low at 254 FPS. This scaling pattern — from 4K to 1440p to 1080p — shows the RTX 4080's rendering power is the primary limiter at higher resolutions, while the 5800XT's multi-threading becomes increasingly relevant at lower resolutions. The 16-thread CPU scales well between resolutions, as evidenced by the 3DMark 16-thread score of 7683, which is 4 times the 8-thread score of 6141.
Similar Performance Alternatives
Looking at the nearest rivals from the data, the AMD Ryzen 7 7840HS is the closest CPU peer, with an average benchmark score of 29,868, a mere 0.0% delta, meaning it will perform almost identically in CPU-bound scenarios. The AMD Ryzen 7 8845HS and AMD Ryzen 7 7840HS show average scores of 29,955 and 29,955 respectively, both 0.3% behind. The AMD Ryzen 5 9600X is slightly ahead at 29,713 (0.6% delta), making it a slightly faster CPU, though the difference is negligible for a game like this.
On the GPU side, the NVIDIA GeForce RTX 4080 SUPER is the closest match, with an average benchmark score of 54,209, a 0.1% delta from the RTX 4080’s 54,247. The AMD Radeon Pro W5700X (54,828 avg, -1.1% delta) and AMD Radeon RX 6750 GRE (55,698, -2.6%) are near, but they trail by a few percent, which in a GPU-bound scenario at 4K Ultra could translate to a reduction of 2-3 FPS. The AMD Radeon 8060S (55,757, -2.7%) is the furthest of this group.
FAQ
Q: Can the AMD Ryzen 7 5800XT handle The Technomancer at 4K with the RTX 4080?
A: At 4K, the Ultra preset is the only one that misses the 60 FPS target, averaging 55 FPS. The High preset averages 70 FPS, so if you must use ray-traced shadows and other extreme effects, you should step down to High or use a lower resolution.
Q: What is the best preset for 1440p?
A: The data shows all four presets are playable at 2560x1440. The Ultra preset averages 100 FPS, which is 40 FPS above the 60 FPS threshold, making it the best choice for maximum visual fidelity without performance concerns.
Q: Is the RTX 4080's 16GB VRAM enough for the High preset at 4K?
A: Yes. At 4K High, the game averages 70 FPS, and the VRAM usage is well within the 16GB frame buffer. There are no frame drops, as the minimum FPS is also 70.
Q: I have a 1080p monitor. Which settings should I use?
A: At 1920x1080, all presets are far above the 60 FPS threshold. The Ultra preset produces 152 FPS average, providing a comfortable margin. You can enable Ultra and all effects without concern.
Best Settings per Resolution
For 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 70 FPS. This gives you the best visual quality in The Technomancer without dropping below the 60 FPS playability floor. Ultra at 55 FPS is not recommended if you demand a consistent 60.
At 2560x1440, you can push to Ultra, which averages 100 FPS. The headroom is substantial, providing a 40 FPS buffer above the 60 FPS threshold.
For 1920x1080, the Ultra preset is the best choice, delivering an average of 152 FPS. This leaves huge overhead for any demanding game sequences, ensuring a smooth experience.
How This Combo Ranks
This combination of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 4080 ranks #296 out of 3,696 tested combos in the database. The CPU lands in the 81st percentile of all tested processors, with an average benchmark score of 29,879. The GPU sits in the 86th percentile with a 54,247 average. It is a top-tier pairing for 1440p and 1080p gaming, though at 4K you must stick to the High preset for a locked 60 FPS experience.
The Verdict
Can this PC run The Technomancer? Yes. The data shows a clear yes. Based on the verdict-by-resolution data, the system delivers 70 FPS at 4K High, 100 FPS at 1440p Ultra, and 152 FPS at 1080p Ultra. At all three resolutions, there is at least one playable preset that hits or exceeds the 60 FPS threshold.
At 4K, stick to High for a solid 70 FPS. Ultra drops to 55 FPS, which is not a smooth experience. At 1440p, Ultra is the sweet spot, delivering 100 FPS, well above the threshold. At 1080p, you can enable Ultra for 152 FPS, which is more than double the playability threshold. For the most demanding visual experience at 1080p and 1440p, this combo is highly capable. For 4K, the High preset is recommended to maintain a consistent 60+ FPS.