Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 59 | 77 | 89 | 115 |
| 1440p QHD | 109 | 140 | 168 | 203 |
| 1080p Full HD | 168 | 206 | 214 | 235 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 7 5700 paired with an NVIDIA GeForce RTX 4090 is a dramatically lopsided combination for The Technomancer, where a mid-range 2022 CPU meets an end-of-life flagship GPU from the same era. Benchmark data for this 2016 Action RPG shows the pairing delivers very high frame rates at 1080p and 1440p, but the demanding Ultra preset at 4K falls just short of the 60 FPS playability threshold. The data reveals a system where the GPU is rarely the bottleneck, leaving the older Zen 3 processor to define the performance ceiling at lower resolutions.
FAQ
Q: What is the highest playable settings preset at 3840x2160?
A: The High preset is the most demanding setting that maintains playable performance at 4K, delivering an average of 76.5 FPS. The Ultra preset drops to 58.5 FPS average, which is below the 60 FPS playability threshold.
Q: How much performance is lost when moving from 1920x1080 to 3840x2160 at Ultra settings?
A: At Ultra settings, the average frame rate falls from 168.3 FPS at 1080p to 108.8 FPS at 1440p, and then to 58.5 FPS at 4K. This represents a 65% reduction in average FPS from 1080p to 4K, indicating a strong resolution scaling curve.
Q: Is the RTX 4090's performance bottlenecked by the Ryzen 7 5700 at lower resolutions?
A: Yes, evidence suggests so. At 1920x1080, the difference between Low and Ultra settings is only 66.6 FPS (234.9 vs 168.3), while at 4K, the same settings gap is 56.6 FPS (115.1 vs 58.5). The relatively small gap at 1080p suggests the CPU limits frame rates before the GPU's full potential is reached.
Q: What is the combo's ranking among all tested hardware combinations for this game?
A: This specific combination ranks 200th out of 3696 tested combos for The Technomancer. This places it in the top 5.4% of all tested systems, indicating very strong overall performance despite the CPU being a potential limiting factor.
Q: How does the Ryzen 7 5700 compare to its closest rival in synthetic benchmarks?
A: The AMD Ryzen 5 7640U is the nearest rival with an average benchmark score of 25485, which is 0.1% higher than the Ryzen 7 5700's score of 25517. The Intel Xeon D-2752TER and AMD Ryzen 5 6600H are also within 0.1% of the 5700's score.
Q: At which resolution does the system achieve the highest average frame rate?
A: The highest recorded average is 234.9 FPS at 1920x1080 with Low settings. Even at the most demanding 4K Ultra preset, the system still produces a playable 58.5 FPS average, though this falls marginally below the 60 FPS threshold.
Best Settings per Resolution
For each resolution, the data identifies the most demanding preset that remains at or above 60 FPS average.
At 3840x2160, the High preset is the optimal choice, producing an average of 76.5 FPS. The Ultra preset at this resolution yields 58.5 FPS average, which is below the playable threshold. Low and Medium presets run at 115.1 and 89.4 FPS respectively, but High offers the best visual quality while maintaining comfortable headroom above 60 FPS.
At 2560x1440, all four presets are playable. The Ultra preset delivers 108.8 FPS average, making it the clear choice for maximum visual fidelity. The High preset runs at 139.5 FPS, Medium at 168.1 FPS, and Low at 203.4 FPS, but none of these lower presets are necessary given the Ultra preset's high frame rate.
At 1920x1080, the Ultra preset achieves 168.3 FPS average, which is far above the 60 FPS threshold. This makes Ultra the recommended setting. Lower presets provide diminishing returns: High runs at 205.8 FPS, Medium at 214.2 FPS, and Low at 234.9 FPS, but the visual quality loss is not justified when Ultra already delivers over 160 FPS.
How This Combo Ranks
The combination of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4090 ranks 200th out of 3696 tested combinations for The Technomancer. This percentile placement indicates the system outperforms roughly 94.6% of all tested hardware pairings for this game. The ranking is notable because the CPU is a mid-range 5000-series part, not a top-tier processor, yet the overall combination still lands in the top 200.
The RTX 4090's synthetic benchmark scores help explain this strong ranking. Its average benchmark score of 60347 places it in the 88th percentile of all GPUs, with a Passmark G3D score of 38194. The CPU's average score of 25517 places it in the 78th percentile of all CPUs. The combination of a high-percentile GPU with a solid mid-range CPU is sufficient for top-tier performance in this aging title. The game's 2016 release date likely means it does not heavily utilize modern multi-core processors, allowing the Ryzen 7 5700's 8 cores and 16 threads to handle the workload without becoming a significant bottleneck at most settings.
Similar Performance Alternatives
Based on the nearest rival data for both components, several alternative combinations would deliver nearly identical performance in The Technomancer.
For the CPU, the AMD Ryzen 5 7640U has an average benchmark score of 25485, which is 0.1% higher than the Ryzen 7 5700's score of 25517. The Intel Xeon D-2752TER scores 25530 (0.1% lower), and the AMD Ryzen 5 6600H scores 25550 (0.1% lower). These processors would behave almost identically to the Ryzen 7 5700 when paired with the RTX 4090, as their synthetic performance is within a rounding error of each other.
For the GPU, the Intel Arc Pro A60 has an average score of 60326, which is exactly 0% different from the RTX 4090's 60347. The AMD Radeon Pro Vega 48 scores 60140 (0.3% higher), while the AMD Radeon Pro W6600M scores 61896 (2.5% higher) and the AMD Radeon PRO V710 scores 58657 (2.9% lower). Swapping the RTX 4090 for the Arc Pro A60 would yield almost identical frame rates, while the Radeon PRO V710 would be slightly slower.
A system combining the Ryzen 7 5700 with any of these GPU alternatives would produce similar measured FPS in The Technomancer, though the exact in-game performance would vary slightly based on driver optimizations and thermal behavior. The RTX 4090's Passmark DirectX 11 score of 326 and DirectX 12 score of 150 indicate strong API-specific performance that these alternatives would need to match.
CPU and GPU Roles
The performance scaling across resolutions and presets reveals that the GPU becomes increasingly dominant as resolution rises, while the CPU matters more at lower resolutions.
At 1920x1080, the frame rate difference between Low and Ultra settings is 66.6 FPS (234.9 vs 168.3). This relatively narrow spread suggests the CPU limits performance even at Low settings, preventing the GPU from pushing frame rates much higher. The Ryzen 7 5700's single-thread score of 901 in 3DMark and Passmark single-thread score of 3296 indicate it can handle the game's logic, but it appears to cap the maximum achievable FPS.
At 2560x1440, the spread between Low and Ultra widens to 94.6 FPS (203.4 vs 108.8). The GPU now has more work to do, and its performance scaling becomes more apparent. The CPU is less likely to be the primary limiter at this resolution, as the GPU's rendering load increases.
At 3840x2160, the Low-to-Ultra spread is 56.6 FPS (115.1 vs 58.5). This tighter spread, combined with the overall lower frame rates, indicates the GPU is now the dominant factor. The RTX 4090's 24 GB of GDDR6X memory and 1.01 TB/s bandwidth are being utilized more fully, and the CPU has ample headroom to feed the GPU with draw calls. The fact that the 4K Ultra preset drops below 60 FPS suggests the game's Ultra settings impose a heavy shading load that even the RTX 4090's 82.58 TFLOPS of FP32 compute cannot overcome at this resolution.
The data implies that for this 2016 title, the Ryzen 7 5700 is sufficient for 4K gaming, where the GPU is the bottleneck. At 1080p, however, the CPU's 3.70 GHz base clock and 4.60 GHz boost clock, combined with its Zen 3 architecture, become the limiting factor. Players targeting 1080p with this combo would leave significant GPU performance on the table.
The Verdict
This PC can run The Technomancer with playable performance at all resolutions, but with caveats at 4K. At 1920x1080, the system clears 60 FPS on all four presets, with the Ultra preset averaging 168.3 FPS. At 2560x1440, all presets also exceed 60 FPS, with Ultra averaging 108.8 FPS. At 3840x2160, the High, Medium, and Low presets all clear 60 FPS, with High averaging 76.5 FPS, but the Ultra preset falls short at 58.5 FPS average.
The verdict is clear: this is a very capable 1080p and 1440p system for The Technomancer, capable of max settings with substantial frame rate headroom. At 4K, it can run High settings comfortably, but Ultra requires turning down to Medium or accepting a frame rate slightly below the 60 FPS threshold. The 58.5 FPS average at 4K Ultra is close enough that most players would find it acceptable, but strict 60 FPS purists should choose High settings instead.
Measured FPS Breakdown
3840x2160 (4K)
- Ultra: 58.5 FPS average
- High: 76.5 FPS average
- Medium: 89.4 FPS average
- Low: 115.1 FPS average
2560x1440 (1440p)
- Ultra: 108.8 FPS average
- High: 139.5 FPS average
- Medium: 168.1 FPS average
- Low: 203.4 FPS average
1920x1080 (1080p)
- Ultra: 168.3 FPS average
- High: 205.8 FPS average
- Medium: 214.2 FPS average
- Low: 234.9 FPS average
The data shows a consistent pattern: frame rates scale predictably with resolution and settings. The largest absolute jump occurs between 4K Ultra (58.5 FPS) and 4K High (76.5 FPS), a 18 FPS improvement from lowering one preset level. At 1440p, the Ultra-to-High gap is 30.7 FPS, while at 1080p it is 37.5 FPS. This suggests the Ultra preset adds a disproportionately heavy load at 4K, likely due to texture or shading effects that scale with pixel count. The system's minimum and maximum frame rates were not recorded in the data, so the average values represent the complete picture of measured performance.