Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

58%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
66 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
24 FPS
11.8ms Frame Time
18ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 25,005
Graphics Card
Required 27,947
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 31 36 47
1440p QHD 43 56 65 85
1080p Full HD 66 85 100 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 85
1920x1080 Low 130
1920x1080 Medium 100
1920x1080 Ultra 66
2560x1440 High 56
2560x1440 Low 85
2560x1440 Medium 65
2560x1440 Ultra 43
3840x2160 High 31
3840x2160 Low 47
3840x2160 Medium 36
3840x2160 Ultra 24

Performance Analysis: The Technomancer on Your System

The Technomancer is an Action RPG from 2016 that stresses both CPU and GPU depending on how it is configured. This analysis looks at the AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 2060, using recorded measurements at three resolutions and four quality presets. The data set includes average, minimum, and maximum frame rates where available, plus a ranking against other tested combinations.

Measured FPS Breakdown

At 1920x1080, the combo delivers a wide spread of performance depending on the preset. With Low settings, the average frame rate reaches 130 FPS. Medium settings drop that to 100 FPS, with a recorded minimum of 85 FPS and a maximum of 115 FPS. High settings produce an average of 85 FPS. Ultra settings, the most demanding preset, still hold an average of 66 FPS. The gap between Low and Ultra is 64 FPS, which shows that this pair has enough headroom at 1080p to allow significant visual upgrades without falling below the 60 FPS threshold.

At 2560x1440, the same pattern appears but with lower absolute numbers. Low settings average 85 FPS. Medium settings average 65 FPS, with a minimum of 55 FPS and a maximum of 75 FPS. High settings average 56 FPS, which is just under the playable threshold. Ultra settings average 43 FPS. The drop from Low to Ultra is 42 FPS, so the GPU becomes more of a limiting factor as resolution climbs.

At 3840x2160, the story changes completely. Low settings average 47 FPS. Medium settings average 36 FPS, with a minimum of 30 FPS and a maximum of 41 FPS. High settings average 31 FPS. Ultra settings average 24 FPS. No preset at 4K reaches the 60 FPS playable mark, and even Low settings fall short by 13 FPS. The minimum recorded frame rate at Medium is 30 FPS, which indicates noticeable stutter during busy scenes.

The data shows that the RTX 2060 has enough power for smooth 1080p gameplay across all presets, including Ultra. At 1440p, only Low and Medium maintain an average at or above 60 FPS. At 4K, the card cannot sustain playable frame rates on any setting, and the best average is 47 FPS on Low.

CPU and GPU Roles

The Ryzen 5 8400F has 6 cores and 12 threads with a base clock of 4.20 GHz and a boost clock of 4.70 GHz. It belongs to the 8000 series on AMD Socket AM5 with Zen 4 architecture. The RTX 2060 uses the TU106 chip with 1920 shading units, 120 texture mapping units, and 48 raster output units. It has 6 GB of GDDR6 memory on a 192-bit bus with 336.0 GB/s of bandwidth.

Looking at resolution scaling, the frame rate drops are steep when moving from 1080p to 1440p and again to 4K. At 1080p Low, the average is 130 FPS. At 1440p Low, it falls to 85 FPS, a reduction of 35 percent. At 4K Low, it falls to 47 FPS, another 45 percent reduction. This pattern indicates that the GPU is the primary constraint at higher resolutions, since the CPU workload does not scale with pixel count.

At 1080p, the gap between Low and Ultra is 64 FPS, from 130 to 66. At 1440p, that gap narrows to 42 FPS, from 85 to 43. At 4K, the gap narrows further to 23 FPS, from 47 to 24. As resolution increases, the GPU becomes saturated, and the difference between presets shrinks because the card cannot render the extra effects at any setting. The CPU has enough single-thread and multi-thread performance to feed the GPU at 1080p and 1440p, but the GPU runs out of throughput before the CPU becomes a bottleneck.

The CPU benchmark data supports this interpretation. The Ryzen 5 8400F scores 20851 in Cinebench R23 multi-core and 2943 in single-core. It ranks in the 77th percentile among all CPUs. The GPU ranks in the 58th percentile among all GPUs. The lower GPU percentile suggests that the graphics card is the weaker link in this pairing, which matches the measured FPS behavior.

At 4K, even Low settings produce only 47 FPS, which means the GPU is heavily loaded regardless of preset. The CPU is not the limiting factor there because reducing settings from High to Low at 4K only changes the average from 31 to 47 FPS, a gain of 16 FPS. At 1080p, the same preset change moves the average from 85 to 130 FPS, a gain of 45 FPS. This larger gain at 1080p indicates that the CPU can handle the lower-resolution workload and the GPU has spare capacity, while at 4K the GPU is already at its limit.

Best Settings per Resolution

At 1920x1080, the best settings that stay at or above 60 FPS are Ultra, with an average of 66 FPS. This is the highest quality preset available in the measurements, and it clears the playable threshold by 6 FPS. Users can run the game at maximum visual fidelity at 1080p without dropping below the target.

At 2560x1440, the best settings are Medium, with an average of 65 FPS. The minimum recorded at Medium is 55 FPS, which dips below the 60 FPS average but the average itself is above the threshold. High settings at 1440p average 56 FPS, which is playable in a loose sense but below the 60 FPS mark. Low settings average 85 FPS, but Medium offers a better visual experience while still maintaining an average above 60.

At 3840x2160, there are no playable settings. The highest average across all presets is 47 FPS on Low, which is 13 FPS short of the playable threshold. Medium averages 36 FPS, High averages 31 FPS, and Ultra averages 24 FPS. No setting can reach 60 FPS at 4K with this hardware combination.

The verdict data confirms these findings. For 2560x1440, the playable settings are Low and Medium, with Medium as the best option at 65 FPS. For 1920x1080, all four presets are playable, with Ultra as the best option at 66 FPS. For 3840x2160, the playable settings list is empty.

How This Combo Ranks

The database ranks this combination at 2911 out of 3696 tested combos for The Technomancer. This places it in the lower 21 percent of all tested configurations. The ranking reflects the fact that the GPU is a mid-range part from 2019 that cannot handle 4K in this title, while the CPU is a modern part with strong benchmark scores.

The CPU alone ranks in the 77th percentile among all CPUs, which is solidly above average. The GPU ranks in the 58th percentile among all GPUs, which is slightly above average but not exceptional. The combination of a high-percentile CPU and a mid-percentile GPU results in a system that excels at 1080p and struggles at 4K.

Compared to other combos in the database, this pairing sits in the lower third overall. That is not surprising given that the game is demanding at high resolutions and the RTX 2060 has only 6 GB of VRAM and a 192-bit memory bus. The 336.0 GB/s memory bandwidth is sufficient for 1080p and 1440p, but at 4K the card runs out of fill rate and memory bandwidth.

The rank of 2911 out of 3696 means that roughly 785 combos performed worse. This places the system in a playable but not high-end tier. At 1080p, the performance is excellent, with Ultra averaging 66 FPS. At 1440p, the performance is acceptable with Medium at 65 FPS. At 4K, the performance is not playable at any setting.

Similar Performance Alternatives

Looking at the CPU nearest rivals, the AMD Ryzen 5 8400F has an average benchmark score of 25005. The AMD Ryzen 5 7500F scores 24964, which is 0.2 percent lower. The Intel Core i7-11850H scores 24935, 0.3 percent lower. The Intel Core i7-13620H scores 24911, 0.4 percent lower. The AMD EPYC 9474F scores 25103, which is 0.4 percent higher. These deltas are small, meaning any of these CPUs would deliver nearly identical frame rates in The Technomancer when paired with the same GPU. The Ryzen 5 7500F is the closest match, with a difference so small that it would be imperceptible in gameplay.

For the GPU, the NVIDIA GeForce RTX 2060 has an average benchmark score of 15290. The NVIDIA GeForce GTX 580 scores 15283, which is effectively identical with a 0 percent delta. The AMD Radeon 680M scores 15270, 0.1 percent lower. The NVIDIA GeForce RTX 3050 OEM scores 15199, 0.6 percent lower. The AMD Radeon RX 7600 scores 15171, 0.8 percent lower. All of these GPUs fall within a 0.8 percent band of each other, so swapping to any of them would produce nearly the same FPS in this game. The GTX 580 is an older card, but its benchmark score matches the RTX 2060 closely enough that the measured frame rates would be very similar.

Combining these, a system with a Ryzen 5 7500F and a GTX 580 would behave almost identically to the tested combo, within the margins of the benchmark scores. The RTX 3050 OEM and RX 7600 are also close enough that the difference would be a frame or two at most. Users considering an upgrade or a sidegrade should expect no meaningful change in The Technomancer from these alternatives.

FAQ

Q: Can this system run The Technomancer at 1080p with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the average frame rate is 66 FPS, which is above the 60 FPS playable threshold. The minimum frame rate was not recorded for Ultra, but the average is sufficient.

Q: What is the best preset for 1440p gameplay?

A: Medium settings at 2560x1440 produce an average of 65 FPS, with a minimum of 55 FPS and a maximum of 75 FPS. This is the highest preset that maintains an average above 60 FPS. High settings drop to 56 FPS average, which is below the threshold.

Q: Is 4K playable with this hardware?

A: No. At 3840x2160, the best average is 47 FPS on Low settings. Medium averages 36 FPS, High averages 31 FPS, and Ultra averages 24 FPS. None of these reach the 60 FPS playable mark.

Q: How does this combo rank against other tested configurations?

A: It ranks 2911 out of 3696 tested combos for The Technomancer. This places it in the lower 21 percent of all combinations, reflecting strong 1080p performance but weak 4K performance.

Q: Which component is the bottleneck at 4K?

A: The GPU. The RTX 2060 ranks in the 58th percentile among all GPUs, and the frame rate drops sharply as resolution increases. At 4K, even Low settings only reach 47 FPS, indicating the graphics card is saturated.

Q: Are there other CPUs or GPUs that would perform similarly?

A: Yes. The CPU nearest rival is the AMD Ryzen 5 7500F with a benchmark score 0.2 percent different. The GPU nearest rival is the NVIDIA GeForce GTX 580 with a 0 percent delta. Swapping to either would produce nearly identical frame rates in this game.