Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 37 | 46 | 58 |
| 1440p QHD | 59 | 69 | 85 | 112 |
| 1080p Full HD | 84 | 111 | 131 | 171 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The Technomancer is a 2016 action RPG, and the pairing of AMD's Ryzen 5 7600X with NVIDIA's GeForce RTX 4060 treats it accordingly: as a light load. Measured data across three resolutions and four presets shows the combo clearing the 60 FPS playability threshold everywhere except 4K Ultra, where the average falls to 29.4 FPS. The following breakdown covers every measured configuration, examines which component sets the ceiling at each resolution, and places this pairing's rank among the other tested combinations in the database.
Measured FPS Breakdown
At 1920x1080, the frame rates are high across the entire preset ladder. Low averages 170.7 FPS, Medium averages 130.5 FPS, High averages 110.5 FPS, and Ultra still averages 84.4 FPS. Even the heaviest preset in the game leaves a comfortable margin above the 60 FPS threshold — more than 24 frames of headroom at Ultra — which indicates the RTX 4060 is never seriously challenged at this resolution.
At 2560x1440, the numbers compress but remain strong. Low averages 112 FPS, Medium averages 84.6 FPS, High averages 69.4 FPS, and Ultra drops below the threshold at 58.5 FPS. That Ultra figure is the first configuration in the dataset that fails the 60 FPS bar, and it misses by a small margin — under two frames on average.
At 3840x2160, the demands of a quadrupled pixel count become decisive. Low averages 57.8 FPS, Medium averages 45.6 FPS, High averages 37.1 FPS, and Ultra averages 29.4 FPS. Not a single preset at 4K reaches 60 FPS, and even Low falls just short. Minimum and maximum frame rates were not recorded for any of these configurations; all figures represent averages only, so frame-time variance at 4K cannot be assessed from this dataset.
CPU and GPU Roles
The scaling pattern between resolutions points squarely at the GPU as the limiting factor in this pairing. Moving from 1080p to 1440p cuts Ultra performance from 84.4 to 58.5 FPS — roughly a third of the frame rate gone for a pixel-count increase — and moving from 1440p to 4K cuts it again from 58.5 to 29.4 FPS, almost exactly halving. Low preset scaling tells the same story: 170.7 FPS at 1080p, 112 FPS at 1440p, and 57.8 FPS at 4K. When frame rate falls in near-proportion to pixel count, the renderer — not the processor feeding it — is the bottleneck.
The CPU-side evidence supports this. The Ryzen 5 7600X sits in the 79th percentile against all CPUs in the database, with a PassMark single-thread score of 4135, a Cinebench R23 single-core score of 1965, and a Geekbench single-core score of 2603. Its multi-thread results (15236 in Cinebench R23 multicore, 13858 in Geekbench multicore, 28390 in PassMark multithread) are far beyond what a 2016 title can exploit. The signature of a CPU limit would be flat frame rates across resolutions; instead, every preset scales downward with resolution, which means the 7600X never becomes the constraint. The Technomancer simply does not ask enough of a modern six-core, twelve-thread Zen 4 processor for it to matter.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, averaging 84.4 FPS. There is no reason to run anything lighter at this resolution.
At 2560x1440, the answer is High, averaging 69.4 FPS. Ultra at 58.5 FPS is the only preset that misses the threshold, and it does so narrowly.
At 3840x2160, no preset qualifies. Low is the closest at 57.8 FPS — still short of 60 — so 4K has no playable configuration under this dataset's threshold. Medium at 45.6 FPS, High at 37.1 FPS, and Ultra at 29.4 FPS fall progressively further behind.
Similar Performance Alternatives
On the CPU side, the Ryzen 5 7600X's nearest rivals are effectively interchangeable for this game. The AMD Ryzen 7 5700X and Intel Core i5-12600K both carry average scores within 0.2 percent of the 7600X's, the AMD Ryzen 7 5800 sits 0.4 percent behind, and the AMD Ryzen 5 8500GE is 0.3 percent ahead. Given that The Technomancer is GPU-bound in this pairing at every resolution above 1080p, any of these processors would produce essentially identical frame rates when paired with the same graphics card. The 7600X's 79th-percentile CPU standing matters less here than the card driving the pixels.
On the GPU side, the RTX 4060 ranks in the 61st percentile of all GPUs, and its listed nearest rivals are an unusual set: the AMD Radeon HD 7790 is 0.2 percent ahead on average score, the AMD Radeon 780M is 0.3 percent behind, and the AMD Radeon Pro 560 and Pro 460 trail by 0.5 and 0.7 percent respectively. Since the game is GPU-limited at 1440p and 4K, swapping in any of these alternatives would be expected to shift the measured frame rates only marginally — which in practice means the 4K results would remain below the 60 FPS line, since even the 4060's Low-preset 57.8 FPS figure leaves no cushion for a slightly slower part.
How This Combo Ranks
Against the full field of tested combinations for The Technomancer, the Ryzen 5 7600X + RTX 4060 pairing ranks 2036 out of 3696 — slightly below the midpoint of the distribution. That placement is consistent with the measured behavior: the combo is comfortably fast at 1080p and 1440p but not fast enough for 4K at any preset. Combinations ranked above it are those pairing stronger GPUs capable of holding 60 FPS at 3840x2160; combinations below it include pairings with slower graphics cards or older processors. The rank reflects a mid-field result driven by the graphics card's 61st-percentile standing rather than any weakness in the CPU, which sits at the 79th percentile of its category.
The Verdict
Yes — this PC runs The Technomancer well at mainstream resolutions. At 1920x1080, every preset clears 60 FPS, topping out at Ultra with an average of 84.4 FPS. At 2560x1440, Low, Medium, and High all clear the threshold, with High delivering 69.4 FPS; only Ultra misses, at 58.5 FPS. At 3840x2160, no preset is playable: the best available figure is 57.8 FPS at Low, below the threshold. The practical recommendation from the data is to play at 1440p High or 1080p Ultra, where the experience is smooth with margin to spare, and to avoid 4K entirely with this configuration.
FAQ
Q: Can the Ryzen 5 7600X and RTX 4060 run The Technomancer at 4K?
A: Not at the 60 FPS threshold. No preset at 3840x2160 reaches it — Low averages 57.8 FPS, Medium 45.6, High 37.1, and Ultra 29.4.
Q: What is the best-looking setting that still hits 60 FPS at 1440p?
A: High, averaging 69.4 FPS. Ultra at 58.5 FPS is the only 1440p preset that falls short.
Q: Does the game run at 60 FPS at 1080p on maximum settings?
A: Yes. Ultra at 1920x1080 averages 84.4 FPS, with the lower presets running faster still — up to 170.7 FPS at Low.
Q: Is the CPU or the GPU the bottleneck?
A: The GPU. Frame rates scale down almost in proportion to pixel count at every preset, which indicates the RTX 4060 is the limit, while the Ryzen 5 7600X — 79th percentile among all CPUs — is never constrained by this 2016 title.
Q: How does this pairing compare to other tested combinations for this game?
A: It ranks 2036 out of 3696 tested combos — slightly below the middle of the field, strong at 1080p and 1440p but short of 4K playability.
Q: Which CPUs would perform similarly in this game?
A: The Ryzen 7 5700X and Core i5-12600K (each within 0.2 percent of the 7600X's average score), the Ryzen 7 5800 (0.4 percent behind), and the Ryzen 5 8500GE (0.3 percent ahead) would all behave essentially the same in this GPU-bound title.