Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
191 FPS
Ultra 1080p Measured
100 FPS

1440p (2K / QHD)

Low 1440p Measured
126 FPS
Ultra 1440p Measured
67 FPS

4K (Ultra HD)

Low 4K Measured
67 FPS
Ultra 4K Measured
36 FPS
7.9ms Frame Time
12ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 27,636
Graphics Card
Required 27,947
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 44 52 67
1440p QHD 67 79 98 126
1080p Full HD 100 127 149 191

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 127
1920x1080 Low 191
1920x1080 Medium 149
1920x1080 Ultra 100
2560x1440 High 79
2560x1440 Low 126
2560x1440 Medium 98
2560x1440 Ultra 67
3840x2160 High 44
3840x2160 Low 67
3840x2160 Medium 52
3840x2160 Ultra 36

Performance Analysis: The Technomancer on Your System

# Measured FPS Breakdown

The measured frame rates for this AMD Ryzen 5 7600X + NVIDIA GeForce RTX 3070 combination span a wide range, from comfortably above 190 FPS at the lightest settings to below 40 FPS at the heaviest. The data shows a clear scaling pattern across all three resolutions.

At 1920x1080, the system delivers its highest performance. With Low settings, the average frame rate reaches 191.3 FPS. Moving to Medium drops the average to 148.6 FPS, a reduction of roughly 22%. High settings produce 127.3 FPS, while Ultra settings still maintain a strong 99.8 FPS average. Even at the most demanding preset, the system remains far above the 60 FPS playability threshold, with roughly 40 FPS of headroom.

At 2560x1440, the frame rates remain high but show more pronounced scaling between presets. Low settings average 126 FPS, Medium averages 98.2 FPS, and High averages 79.4 FPS. Ultra settings bring the average down to 66.7 FPS, which still clears the playability threshold but with only 6.7 FPS of margin. The gap between Low and Ultra at this resolution is approximately 59 FPS, indicating that the GPU workload scales significantly with quality settings.

At 3840x2160, the situation changes dramatically. Low settings average 66.5 FPS, which is just above the 60 FPS threshold. Medium settings average 51.7 FPS, High settings average 44 FPS, and Ultra settings average 36.4 FPS. The data indicates that only the Low preset remains playable at 4K, and even that has limited headroom. The Ultra preset at 4K delivers less than two-thirds of the frame rate of the Low preset, showing the heavy cost of quality settings at this resolution.

The minimum and maximum frame rates were not recorded in the dataset, so the analysis relies entirely on average FPS values. This is consistent across all resolution and settings combinations.

# FAQ

Q: Can this system run The Technomancer at 1920x1080 with maximum settings?

A: Yes. The Ultra preset at 1920x1080 produces an average of 99.8 FPS, which is well above the 60 FPS playability threshold. The system has roughly 40 FPS of margin at this resolution and settings level.

Q: Is 4K gaming viable with this combination?

A: Only at Low settings. The measured data shows 66.5 FPS average at 3840x2160 with Low settings, barely clearing the 60 FPS threshold. Medium settings at 4K average 51.7 FPS, which falls below the playability threshold. High and Ultra presets at 4K are not playable, with averages of 44 FPS and 36.4 FPS respectively.

Q: How much performance is gained by dropping from Ultra to Low settings?

A: The gain depends heavily on resolution. At 1920x1080, the jump from Ultra (99.8 FPS) to Low (191.3 FPS) yields roughly 91.5 FPS, a near doubling. At 2560x1440, the gain is about 59 FPS (from 66.7 to 126 FPS). At 3840x2160, the gain is about 30 FPS (from 36.4 to 66.5 FPS), which is the difference between unplayable and playable.

Q: What is the best playable setting at 2560x1440?

A: The Ultra preset is playable at 2560x1440 with an average of 66.7 FPS. This is the highest quality setting that remains above the 60 FPS threshold at this resolution, making it the best choice for visual fidelity while maintaining playability.

Q: Does the system meet the 60 FPS threshold at all tested settings?

A: No. At 3840x2160, only the Low preset (66.5 FPS) meets the threshold. Medium (51.7 FPS), High (44 FPS), and Ultra (36.4 FPS) all fall below 60 FPS at 4K. At both 1920x1080 and 2560x1440, all four presets (Low, Medium, High, Ultra) clear the threshold.

Q: How does the RTX 3070's performance compare to the CPU's capabilities in this game?

A: The benchmark data suggests the GPU is the limiting factor at higher resolutions. While the CPU delivers strong multi-threaded performance with a Cinebench R23 multi-core score of 15236, the GPU's frame rates drop significantly at 4K Ultra (36.4 FPS) compared to 1080p Ultra (99.8 FPS). This scaling pattern indicates the RTX 3070 becomes the bottleneck as resolution increases.

# Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which produces an average of 99.8 FPS. This leaves substantial headroom above the threshold, so users could comfortably enable the highest quality settings without concern for playability.

At 2560x1440, the best playable preset is also Ultra, averaging 66.7 FPS. This clears the 60 FPS threshold, but with a smaller margin of 6.7 FPS. Users who prefer a more stable experience might consider High settings at 79.4 FPS, but Ultra remains technically playable.

At 3840x2160, only the Low preset maintains playability, with an average of 66.5 FPS. This is the sole option at 4K that stays above the 60 FPS line. Medium settings at 4K dip to 51.7 FPS, which is below the threshold and not recommended for consistent gameplay.

# How This Combo Ranks

This specific combination of AMD Ryzen 5 7600X and NVIDIA GeForce RTX 3070 ranks 1568 out of 3696 tested combos in The Technomancer. This places the system in the 42nd percentile of all tested configurations, meaning roughly 58% of tested combinations deliver higher average frame rates in this game.

The ranking reflects the game's release era (2016) and its relatively modest graphical demands by modern standards. The RTX 3070, despite being an end-of-life product, still provides solid performance at 1080p and 1440p. The CPU's 79th percentile ranking among all CPUs (with an average benchmark score of 27636) is notably higher than the GPU's 61st percentile ranking, suggesting the graphics card is the more limiting component in this pairing.

The combo's position in the lower-middle range of tested configurations indicates that while this system handles the game well at most settings, there are many faster combinations available. The gap between the CPU and GPU percentiles also suggests that upgrading the graphics card would yield more benefit than upgrading the processor for this particular title.

# Similar Performance Alternatives

Based on the nearest rival data for both components, several alternative configurations would deliver similar performance in The Technomancer.

On the CPU side, the AMD Ryzen 7 5700X (average score 27578, delta 0.2%) and Intel Core i5-12600K (average score 27578, delta 0.2%) are nearly identical to the Ryzen 5 7600X in overall benchmark performance. The AMD Ryzen 7 5800 (average score 27535, delta 0.4%) is also closely matched. The AMD Ryzen 5 8500GE (average score 27712, delta -0.3%) is marginally faster in synthetic benchmarks but would behave essentially the same in this game. Any of these CPUs paired with the RTX 3070 would produce frame rates within a fraction of a percent of the tested configuration.

On the GPU side, the AMD Radeon RX 7600 XT (average score 17083, delta 0.7%) is the closest match to the RTX 3070 (average score 17208). The NVIDIA GeForce GTX 690 (average score 17037, delta 1%) and AMD Radeon HD 7970M (average score 17019, delta 1.1%) are slightly slower, while the NVIDIA Tesla K40c (average score 17468, delta -1.5%) is slightly faster in synthetic benchmarks. In practice, pairing the Ryzen 5 7600X with an RX 7600 XT would deliver nearly identical frame rates in The Technomancer. The GTX 690 and HD 7970M are older architectures and may not support the same feature set, but their raw benchmark scores suggest similar average performance in this title.

It is worth remembering the GPU rival list includes some unusual entries (a dual-GPU card and a mobile chip), which reflects the synthetic benchmark database rather than real-world gaming equivalence. For gaming purposes, the RX 7600 XT is the most relevant comparable alternative.

# The Verdict

This PC can run The Technomancer, but the playable experience depends heavily on resolution and settings.

At 1920x1080, the system handles the game with ease. All four presets—Low (191.3 FPS), Medium (148.6 FPS), High (127.3 FPS), and Ultra (99.8 FPS)—clear the 60 FPS threshold by a wide margin. Users can play at the highest settings and still have roughly 40 FPS of headroom.

At 2560x1440, the system remains fully playable across all presets. Ultra settings average 66.7 FPS, which is above the threshold, while High (79.4 FPS), Medium (98.2 FPS), and Low (126 FPS) all provide more comfortable margins. This resolution offers the best balance of visual quality and performance for this combination.

At 3840x2160, the system is only playable at Low settings, with an average of 66.5 FPS. Medium drops to 51.7 FPS, High to 44 FPS, and Ultra to 36.4 FPS, all of which fall below the 60 FPS threshold. Users targeting 4K will need to accept significant visual compromises to maintain playability.

The overall verdict is that this system is well-suited for 1080p and 1440p gaming in The Technomancer, with 1440p Ultra being the recommended target for the best experience. At 4K, only the lowest settings are viable.

# CPU and GPU Roles

The data reveals distinct patterns in how the CPU and GPU contribute to performance across resolutions and settings.

At 1920x1080, the frame rates are high across all presets (99.8 to 191.3 FPS), suggesting the GPU is not heavily taxed. The scaling from Low to Ultra reduces performance by roughly 48%, which indicates the GPU is still the primary factor. However, the CPU's strong single-thread performance (Cinebench R23 single-core score of 1965, 3DMark single-thread score of 1060) ensures it does not bottleneck at these frame rates. The system maintains high FPS even at Low settings, where CPU overhead typically becomes more visible.

At 2560x1440, the scaling pattern becomes more pronounced. The difference between Low (126 FPS) and Ultra (66.7 FPS) is about 47%, similar to 1080p. This consistency suggests the GPU remains the dominant factor across these two resolutions. The CPU, with its 12 threads and high boost clock of 5.30 GHz, has ample headroom to feed the GPU at these frame rates.

At 3840x2160, the GPU's role becomes clearly dominant. The average frame rates drop to 36.4–66.5 FPS across presets, which is below or barely above the threshold. At these lower frame rates, the CPU's workload per frame is less demanding, and the RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth become the limiting factors. The significant drop from 1440p to 4K (e.g., Ultra going from 66.7 to 36.4 FPS, a 45% reduction) indicates the GPU is saturated by the increased pixel count.

The CPU's benchmark scores (79th percentile among all CPUs, average score 27636) are substantially higher than the GPU's (61st percentile, average score 17208). This imbalance suggests that in this pairing, the GPU is the bottleneck at higher resolutions. Users who want improved 4K performance would benefit more from a GPU upgrade than a CPU upgrade, as the Ryzen 5 7600X already provides strong multi-threaded performance (Cinebench R23 multi-core score of 15236, 3DMark max-threads score of 6845).

At 1080p and 1440p, the CPU and GPU work in better balance, with the GPU still leading the performance scaling but neither component being severely underutilized. The measured FPS at these resolutions (up to 191.3 FPS) suggests the CPU can handle high frame rates without becoming a limiting factor, making the RTX 3070 the component that determines the quality ceiling.