Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

60%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
66 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
24 FPS
11.8ms Frame Time
18ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 26,324
Graphics Card
Required 27,947
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 31 36 47
1440p QHD 43 56 65 85
1080p Full HD 66 85 100 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 85
1920x1080 Low 130
1920x1080 Medium 100
1920x1080 Ultra 66
2560x1440 High 56
2560x1440 Low 85
2560x1440 Medium 65
2560x1440 Ultra 43
3840x2160 High 31
3840x2160 Low 47
3840x2160 Medium 36
3840x2160 Ultra 24

Performance Analysis: The Technomancer on Your System

Measured FPS Breakdown

The recorded performance data for The Technomancer on the AMD Ryzen 5 7600 with the NVIDIA GeForce RTX 2060 spans three resolutions and four quality presets. The database captured average frame rates for every combination, with minimum and maximum values available for the Medium preset at each resolution.

At 3840x2160, the system delivers an average of 47 FPS on Low settings, which drops to 36 FPS on Medium with a minimum of 30 FPS and a maximum of 41 FPS. High settings produce an average of 31 FPS, while Ultra falls to 24 FPS. None of these averages reach the 60 FPS playability threshold, and even the Low preset sits 13 FPS below that mark. The scaling from Low to Ultra represents a 23 FPS reduction, showing that this resolution demands more from the GPU than the RTX 2060 can provide.

Moving to 2560x1440, the results improve substantially. Low settings yield an average of 85 FPS, comfortably above the playability threshold. Medium settings average 65 FPS with a minimum of 55 FPS and a maximum of 75 FPS. High settings drop to 56 FPS, just 4 FPS below the 60 FPS target, while Ultra averages 43 FPS. The gap between Low and Ultra here is 42 FPS, a wider spread than at 4K, which indicates that at this resolution the preset choice has a larger relative impact on performance.

At 1920x1080, the system performs strongly across the board. Low settings average 130 FPS, Medium averages 100 FPS with minimum and maximum values of 85 FPS and 115 FPS respectively, High averages 85 FPS, and Ultra averages 66 FPS. Every preset clears the 60 FPS threshold, with Ultra being the only one that does so by a narrow margin of 6 FPS. The step from Medium to Low adds 30 FPS, while the step from Ultra to High adds 19 FPS, showing that the lower presets provide increasingly large returns in frame rate.

The data shows a consistent pattern: as resolution increases, the average frame rates compress toward lower values, and the differences between presets become less pronounced. At 1080p, the spread from Ultra to Low is 64 FPS. At 1440p, it narrows to 42 FPS. At 4K, it narrows further to 23 FPS. This compression suggests that at higher resolutions the GPU becomes the limiting factor, flattening the performance curve across settings.

Best Settings per Resolution

Using the playable threshold of 60 FPS as the benchmark, the database identifies the most demanding preset that remains at or above that average at each resolution.

At 3840x2160, no preset achieves 60 FPS. The closest is Low with 47 FPS, which falls 13 FPS short. Medium averages 36 FPS, High averages 31 FPS, and Ultra averages 24 FPS. The verdict for this resolution lists no playable settings, so there is no best settings recommendation.

At 2560x1440, two presets clear the threshold: Low at 85 FPS and Medium at 65 FPS. The best settings are Medium, with an average of 65 FPS. High falls below the threshold at 56 FPS, and Ultra is further behind at 43 FPS. For a player prioritizing visual quality while maintaining smooth playback, Medium is the highest preset that works at this resolution.

At 1920x1080, all four presets exceed 60 FPS. Low averages 130 FPS, Medium averages 100 FPS, High averages 85 FPS, and Ultra averages 66 FPS. The best settings are Ultra, with an average of 66 FPS. This is the only resolution where the maximum quality preset remains playable, and it does so with a 6 FPS margin above the threshold.

The pattern across resolutions is clear: the system can handle maximum quality only at 1080p, medium quality at 1440p, and no quality level at 4K. The margin above 60 FPS shrinks as resolution increases, from 6 FPS at Ultra 1080p to 5 FPS at Medium 1440p, before disappearing entirely at 4K.

CPU and GPU Roles

The measured data reveals how the balance between the AMD Ryzen 5 7600 and the NVIDIA GeForce RTX 2060 shifts across resolutions and presets. The CPU is a Zen 4 architecture processor with 6 cores and 12 threads, a boost clock of 5.10 GHz, and a 32 MB shared L3 cache. It ranks in the 78th percentile among all CPUs in the database. The GPU is a Turing architecture card with 1920 shading units, 6 GB of GDDR6 memory on a 192 bit bus, and a boost clock of 1680 MHz. It ranks in the 58th percentile among all GPUs.

The scaling between 1080p and 1440p provides the clearest evidence of where the bottleneck lies. At Low settings, the average frame rate drops from 130 FPS at 1080p to 85 FPS at 1440p, a reduction of 45 FPS or roughly 35%. At Ultra settings, the drop is from 66 FPS to 43 FPS, a reduction of 23 FPS or roughly 35% as well. The proportional drop is similar across presets, which suggests that resolution scaling is consistent regardless of quality level.

The scaling between 1440p and 4K shows a different pattern. At Low settings, the average drops from 85 FPS to 47 FPS, a reduction of 38 FPS. At Medium, it drops from 65 FPS to 36 FPS, a reduction of 29 FPS. At High, it drops from 56 FPS to 31 FPS, a reduction of 25 FPS. At Ultra, it drops from 43 FPS to 24 FPS, a reduction of 19 FPS. The absolute drop becomes smaller as settings increase, which indicates that at 4K the GPU is already saturated and additional pixel load has diminishing returns on frame rate impact.

The CPU's capability is evident in the 1080p results. At Low settings, the system reaches 130 FPS, and at Medium it reaches 100 FPS. These high frame rates indicate that the processor can feed the GPU efficiently at lower resolutions. The Ryzen 5 7600 scores 12,735 in Cinebench R23 multicore and 1,852 in single-core, placing it well above the average CPU in the database. Even at 1080p Ultra, the system maintains 66 FPS, which suggests the CPU is not the limiting factor in this configuration.

At 1440p and 4K, the GPU takes on the primary role. The RTX 2060's 6 GB of memory and 336.0 GB/s bandwidth are sufficient for 1080p and 1440p, but the 4K results show clear GPU limitation. The fact that no preset reaches 60 FPS at 4K, combined with the compressed spread between presets at that resolution, points to the graphics card as the binding constraint. At 1440p, the GPU still manages 65 FPS at Medium, but the step to High drops below 60 FPS, showing that the card is near its practical ceiling at this resolution.

The data indicates that at 1080p, the combination is balanced with headroom on both sides. At 1440p, the GPU becomes the primary constraint, and at 4K, the GPU is the sole constraint. The CPU's performance headroom is sufficient across all tested resolutions, as evidenced by the high frame rates at 1080p and the consistent scaling behavior.

How This Combo Ranks

Within the database of tested combinations for The Technomancer, this specific pairing of the AMD Ryzen 5 7600 and the NVIDIA GeForce RTX 2060 ranks 2911 out of 3696 total combinations. This places it in the lower portion of the distribution, roughly in the 21st percentile of tested combos.

The rank reflects the GPU's position in the overall hardware landscape. The RTX 2060 sits in the 58th percentile among all GPUs, which is below the median of tested graphics cards. The CPU, by contrast, sits in the 78th percentile among all CPUs, indicating that the processor is significantly stronger than the graphics card in this pairing.

The game's release in 2016 predates both components by several years. The CPU launched in January 2023, and the GPU launched in January 2019. The Technomancer is an Action RPG from that era, and the measured performance suggests that the game's engine responds well to modern hardware at lower resolutions but presents a substantial challenge at 4K.

The rank of 2911 out of 3696 means that a large majority of tested combinations perform better in this game. This is primarily attributable to the GPU, since the RTX 2060 is a mid-range card from the GeForce 20-series with a 58th percentile ranking. However, the 1080p results show that the combination is fully capable of running the game at high quality settings, which may be sufficient for many users given the game's age.

Similar Performance Alternatives

The nearest rivals in the database provide context for how other components would behave in similar configurations.

For the CPU, the AMD Ryzen 5 7600 has an average benchmark score of 26,324. The closest alternatives are the AMD Ryzen 9 6900HX with an average score of 26,274 and a delta of 0.2%, the AMD Ryzen 7 7435HS with an average score of 26,402 and a delta of -0.3%, the Intel Core i9-11900KF with an average score of 26,212 and a delta of 0.4%, and the AMD Ryzen 5 8540U with an average score of 26,187 and a delta of 0.5%. These deltas are all within half a percent, meaning that swapping the Ryzen 5 7600 for any of these processors would produce nearly identical performance in CPU-bound scenarios. The Intel Core i9-11900KF and the AMD Ryzen 9 6900HX are marginally ahead, while the AMD Ryzen 7 7435HS and AMD Ryzen 5 8540U are marginally behind, but none of these differences would be perceptible in gameplay.

For the GPU, the NVIDIA GeForce RTX 2060 has an average benchmark score of 15,290. The nearest rivals are the NVIDIA GeForce GTX 580 with an average score of 15,283 and a delta of 0%, the AMD Radeon 680M with an average score of 15,270 and a delta of 0.1%, the NVIDIA GeForce RTX 3050 OEM with an average score of 15,199 and a delta of 0.6%, and the AMD Radeon RX 7600 with an average score of 15,171 and a delta of 0.8%. The GTX 580 is essentially identical in average score, while the Radeon 680M is 0.1% behind, the RTX 3050 OEM is 0.6% behind, and the RX 7600 is 0.8% behind. These deltas are small enough that frame rates in The Technomancer would be nearly indistinguishable across these cards.

The practical implication is that a system with the Ryzen 5 7600 paired with any of these rival GPUs would produce very similar results to the measured data. Conversely, pairing the RTX 2060 with any of the rival CPUs would also yield comparable performance. The measured FPS values for this combination can therefore be treated as representative of a broader cluster of hardware configurations.

The Verdict

The AMD Ryzen 5 7600 with the NVIDIA GeForce RTX 2060 can run The Technomancer, but the answer depends heavily on the target resolution.

At 3840x2160, the verdict is clear: this system cannot maintain 60 FPS at any settings preset. The highest average is 47 FPS on Low, and the lowest is 24 FPS on Ultra. No playable settings are listed for this resolution, so users with a 4K display would need to accept frame rates well below the playability threshold.

At 2560x1440, the system is playable on Low and Medium settings. Low averages 85 FPS, and Medium averages 65 FPS with a minimum of 55 FPS. The best settings are Medium, which provides a 5 FPS margin above the 60 FPS threshold. High settings fall short at 56 FPS, and Ultra is not viable at 43 FPS.

At 1920x1080, the system is fully playable at every settings preset. Low averages 130 FPS, Medium averages 100 FPS, High averages 85 FPS, and Ultra averages 66 FPS. The best settings are Ultra, which clears the threshold by 6 FPS. This is the resolution where the combination shows its strengths, delivering smooth performance even at maximum quality.

The overall picture is of a system that is well suited to 1080p gaming, adequate for 1440p at reduced settings, and unsuitable for 4K in this title. The CPU provides ample headroom, while the GPU determines the practical limits of the configuration.

FAQ

Q: Can this system run The Technomancer at 4K resolution?

A: No. At 3840x2160, no settings preset reaches 60 FPS. Low averages 47 FPS, Medium averages 36 FPS, High averages 31 FPS, and Ultra averages 24 FPS.

Q: What is the best settings preset at 1440p for this system?

A: Medium is the best settings preset at 2560x1440, with an average of 65 FPS. Low also works at 85 FPS, but Medium offers higher quality while staying above the 60 FPS threshold.

Q: Does this system achieve 60 FPS at Ultra settings in 1080p?

A: Yes. At 1920x1080 with Ultra settings, the system averages 66 FPS, which is 6 FPS above the playability threshold. All other presets at this resolution also exceed 60 FPS.

Q: How does the Ryzen 5 7600 compare to its nearest CPU rivals?

A: The Ryzen 5 7600 has an average benchmark score of 26,324. The AMD Ryzen 9 6900HX is 0.2% ahead, the AMD Ryzen 7 7435HS is 0.3% behind, the Intel Core i9-11900KF is 0.4% ahead, and the AMD Ryzen 5 8540U is 0.5% ahead. These differences are negligible in practice.

Q: How does the RTX 2060 compare to its nearest GPU rivals?

A: The RTX 2060 has an average benchmark score of 15,290. The NVIDIA GeForce GTX 580 is exactly 0% different, the AMD Radeon 680M is 0.1% behind, the NVIDIA GeForce RTX 3050 OEM is 0.6% behind, and the AMD Radeon RX 7600 is 0.8% behind. Performance would be nearly identical across these cards.

Q: What is the minimum FPS recorded for Medium settings at 1080p?

A: At 1920x1080 with Medium settings, the minimum FPS is 85 and the maximum is 115, with an average of 100 FPS.