Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
77 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
10.2ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 24,964
Graphics Card
Required 27,947
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 41 54
1440p QHD 50 64 75 98
1080p Full HD 77 98 115 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 150
1920x1080 Medium 115
1920x1080 Ultra 77
2560x1440 High 64
2560x1440 Low 98
2560x1440 Medium 75
2560x1440 Ultra 50
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5050 combination delivers a mixed bag for The Technomancer, with performance that scales predictably from a smooth 1080p experience to an unplayable 4K one. The data shows this pairing is clearly capable of solid frame rates at mainstream resolutions, but the GPU’s 8 GB frame buffer and 128-bit interface cap its higher-resolution ambitions. Below is the measured FPS breakdown, followed by practical guidance on settings and expectations.

Measured FPS Breakdown

At 1920x1080, this system is firmly in high-refresh territory. The Low preset averages 150 FPS, which is the ceiling of the measured data and suggests the CPU and GPU have plenty of headroom. Bumping to Medium drops the average to 115 FPS, with a minimum of 98 FPS and a maximum of 132 FPS — that minimum still clears the 60 FPS playability threshold by a wide margin. The High preset averages 98 FPS, and even the most demanding Ultra preset holds an average of 77 FPS. None of the 1080p presets dip below 60 FPS, so this is the resolution where the hardware feels genuinely comfortable. The gap between Low and Ultra is 73 FPS, indicating the GPU is the primary scaler, but the CPU keeps up without bottlenecking.

Moving to 2560x1440, the frame rates remain playable, but the margins tighten. The Low preset averages 98 FPS, which is identical to the 1080p High result — a sign that the GPU is still the limiting factor. Medium averages 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS, so even the worst-case frame stays above 60. High averages 64 FPS, which just clears the playable threshold, but there is no recorded minimum for this setting, meaning a transient dip below 60 is possible. The Ultra preset drops to an average of 50 FPS, which is below the playability line. The scaling from 1080p High (98 FPS) to 1440p High (64 FPS) is a 34 FPS drop, a 35% reduction that points to raw GPU throughput constraints.

At 3840x2160, the combination falls out of playable range on every preset. The Low setting averages 54 FPS, just 6 FPS short of the 60 FPS threshold. Medium averages 41 FPS with a minimum of 35 FPS and a maximum of 48 FPS, showing a consistent frame-time floor. High drops to 35 FPS, and Ultra bottoms out at 28 FPS. The data clearly shows that 4K is not viable with this hardware, even on the lowest preset, which is a critical finding for anyone with a 4K display.

FAQ

Q: Can this PC run The Technomancer at 4K?

A: No. The best result at 3840x2160 is the Low preset at 54 FPS, which is below the 60 FPS playability threshold. The Medium preset drops to 41 FPS, and Ultra sits at 28 FPS. The verdict data lists no playable settings at 4K.

Q: What is the best preset at 1440p that stays above 60 FPS?

A: The High preset at 2560x1440 delivers an average of 64 FPS, making it the most demanding setting that stays playable. The Medium preset averages 75 FPS, which is also a solid choice, but High offers a higher visual quality with a slimmer frame rate margin.

Q: Is there any preset at 1080p that is not playable?

A: No. Every preset at 1920x1080 exceeds the 60 FPS threshold. The lowest performer, Ultra, still averages 77 FPS, which is 17 FPS above the playability line.

Q: How does the RTX 5050 compare to nearby GPUs?

A: The RTX 5050’s average benchmark score is 21035, placing it in the 66th percentile of all GPUs. It is 1.6% behind the AMD Radeon RX 5600 XT (20713) and 0.6% ahead of the AMD Radeon RX Vega M GL (21153). The data suggests performance is comparable to a mid-range card from a previous generation.

Q: How does the CPU compare to its rivals?

A: The Ryzen 5 7500F has an average benchmark score of 24964, putting it in the 77th percentile of all CPUs. It is 0.1% faster than the Intel Core i7-11850H, 0.2% faster than the Intel Core i7-13620H, and 0.4% faster than the Intel Core 5 210H. The CPU is not a limiting factor in this game.

Q: What is the best 4K setting for this PC?

A: There is no best setting at 4K because no preset reaches 60 FPS. The Low preset at 54 FPS is the most playable, but it still fails the threshold. For a playable experience, you must use 1440p or lower.

CPU and GPU Roles

The data indicates the GPU is the dominant performance driver for The Technomancer. This is evident from the scaling between the two components: the Ryzen 5 7500F is a high-end 7000-series part in the 77th percentile of all CPUs, while the RTX 5050 sits in the 66th percentile of GPUs. The CPU’s 6-core, 12-thread Zen 4 architecture with a boost clock of 5.00 GHz is more than sufficient for a 2016 Action RPG, as even the multi-threaded benchmark scores (Cinebench R23 multi: 22799) are far above what this game needs.

At 1920x1080, the difference between Low (150 FPS) and Ultra (77 FPS) is 73 FPS, which is entirely driven by GPU workload. The CPU has no trouble feeding frames, as evidenced by the 150 FPS ceiling. At 2560x1440, the GPU becomes the bottleneck: each preset step yields a drop of about 16-25 FPS (from 98 FPS on Low to 64 FPS on High), while the CPU remains idle. The 4K scaling confirms this: the GPU is stretched to its limits, with the Low preset dropping to 54 FPS and Ultra to 28 FPS.

The CPU’s role is to provide a stable frame delivery floor. The minimum FPS at 1440p Medium is 64 FPS, which means the CPU is not causing frame hitches. Given that the CPU’s benchmark scores (e.g., single-thread 3218 in Cinebench R23) are far above any likely requirement, upgrading the CPU would not improve frame rates. Upgrading the GPU would, however, be the only way to unlock 4K playback.

Similar Performance Alternatives

For the CPU, the nearest rivals are all within 0.4% performance of the Ryzen 5 7500F. The Intel Core i7-11850H (avg score 24935) is the closest, just 0.1% behind. The AMD Ryzen 5 8400F is 0.2% behind, while the Intel Core i7-13620H and Intel Core 5 210H are 0.2% and 0.4% faster, respectively. In real-world gaming, these differences are negligible; any of these CPUs would deliver nearly identical frame rates in The Technomancer.

For the GPU, the RTX 5050’s neighbors are a mix of mobile and desktop parts. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower than the RTX 5050. The AMD Radeon RX Vega M GL scores 21153, 0.6% higher, and the AMD Radeon HD 8970M scores 21237, 1.0% higher. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. For gaming, these results indicate that an RX 5600 XT would deliver nearly identical FPS at 1440p, while the mobile parts would be slightly slower or faster depending on the model.

If you have one of these GPUs, you can expect the same basic behavior: 1080p Ultra at 77 FPS, 1440p High at 64 FPS, and 4K unplayable. The CPU’s rivals do not change the picture at all, as the frame rate is always GPU-limited.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the best choice because it remains playable with an average of 77 FPS. This is the highest preset tested, and it clears the 60 FPS threshold by 17 FPS, providing margin for demanding scenes.

At 2560x1440, the High preset is the best. It averages 64 FPS, which is the only preset above 60 FPS that also offers higher quality than Medium (which averages 75 FPS). The High preset leaves only a 4 FPS margin, so if you prefer safety, Medium at 75 FPS is the safer choice.

At 3840x2160, there is no best setting because no preset reaches 60 FPS. The lowest preset, Low, averages 54 FPS, but it is below the playability line. You must either lower the resolution or accept an unplayable frame.

The Verdict

Yes, this PC can run The Technomancer, but only at 1080p and 1440p. At 1920x1080, all four presets are playable, with Ultra averaging 77 FPS and Low hitting 150 FPS. At 2560x1440, the High preset is the best playable option at 64 FPS, while Ultra drops to 50 FPS, failing the threshold. At 3840x2160, no setting is playable — even Low sits at 54 FPS, which is 6 FPS short of the requirement.

The system’s rank of 2269 out of 3696 combinations reflects its mid-range position: it’s strong at 1080p, adequate at 1440p, and unsuitable for 4K. For 1080p gamers, this is a smooth experience with headroom. For 1440p, you’ll need to stick to High or lower. For 4K, you need a more powerful GPU. The CPU is not the constraint; the GPU’s memory bandwidth and raw throughput are.