The Technomancer

The Technomancer, a 2016 Action RPG, presents a mixed bag for the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4060 combination. The benchmark data shows a system that is clearly capable of delivering smooth gameplay at mainstream resolutions, but it runs into a hard wall at 4K Ultra settings. This analysis breaks down the measured FPS, compares the hardware to nearby alternatives, and provides a clear verdict on what this PC can and cannot do.

Measured FPS Breakdown

The measured FPS data for this combo covers three resolutions and four quality presets, providing a complete picture of performance scaling. At 1920x1080, the system is consistently fast. With Low settings, the average FPS is 172. Moving up to Medium yields 130.7 FPS, and High settings still produce a very smooth 112.1 FPS. Even at the demanding Ultra preset, the average FPS remains high at 87, which is well above the 60 FPS playable threshold. This resolution is clearly the strong suit for this hardware, with no preset falling below the playable mark.

Stepping up to 2560x1440 shows a predictable performance drop, but the system remains highly capable. The Low preset averages 112.2 FPS, which is still exceptionally high. Medium settings produce 85.2 FPS, and High settings maintain a comfortable 74.7 FPS. The first sign of trouble appears at Ultra, where the average FPS drops to 54.4. This is below the 60 FPS threshold, indicating that the most demanding preset at this resolution will require some compromises for a perfectly smooth experience.

At 3840x2160 (4K), the performance ceiling becomes very apparent. The Low preset is the only one that clears the 60 FPS bar, with an average of 61 FPS. Medium settings drop to 46.9 FPS, High falls further to 41.4 FPS, and the Ultra preset is nearly unplayable at 33.5 FPS. The data shows a clear trend: this combination is best suited for 1080p and 1440p gaming, with 4K only viable at the absolute lowest settings. The scaling from 1080p to 4K is steep, with the Ultra preset dropping from 87 FPS to 33.5 FPS, a reduction of over 60%.

Similar Performance Alternatives

The benchmark data from the CPU and GPU databases helps contextualize this pairing by showing what other hardware would perform in a similar range. For the AMD Ryzen 5 7500F, the nearest rivals are overwhelmingly close in average benchmark score. The Intel Core i7-11850H is a near-identical match, with a deltaPct of only 0.1%. The AMD Ryzen 5 8400F is slightly faster, at -0.2% delta, meaning the 7500F is essentially on par with it. The Intel Core i7-13620H and Intel Core 5 210H are also within a fraction of a percent. In practical terms, any of these CPUs would produce nearly identical frame rates in The Technomancer, indicating that the processor is not a bottleneck in this specific title.

On the GPU side, the NVIDIA GeForce RTX 4060 has a more interesting set of rivals. The AMD Radeon HD 7790 is the closest match with a deltaPct of -0.2%, which is surprising given the generational gap. The AMD Radeon 780M integrated graphics are also very close, at 0.3% delta. This suggests that the RTX 4060's performance profile in this game is not unique, and a user with a discrete GPU from a different era or a high-end integrated solution might see comparable frame rates. The AMD Radeon Pro 560 and Pro 460 are also within a single percentage point, further reinforcing that the RTX 4060's level of performance is a common target. For a builder, this means that if the RTX 4060 is unavailable, any of these alternative GPUs would deliver a very similar experience in The Technomancer.

CPU and GPU Roles

The performance scaling between resolutions and presets reveals a clear picture of which component is doing the heavy lifting. The game is heavily GPU-bound, as evidenced by the dramatic FPS drops when moving from 1080p to 4K. At 1080p, the CPU has little trouble feeding the GPU, allowing it to hit 172 FPS on Low settings. The fact that the same CPU is paired with a GPU that produces such a wide range of scores across presets indicates that the graphics card is the limiting factor.

This is further confirmed by the CPU's benchmark profile. The Ryzen 5 7500F scores 22799 in Cinebench R23 multi-core and 3218 in single-core, placing it in the 77th percentile of all CPUs. Its nearest rivals are all within 0.4% of its average score, showing that it is a very consistent performer. The CPU is simply not the constraint here. The GPU, with its 8 GB of VRAM and 128-bit memory bus, is the component that determines the playable settings.

At 1440p, the system is still GPU-limited, but the gap narrows. The CPU can easily maintain high frame rates on Low and Medium, but the Ultra preset drops below 60 FPS, showing that the GPU is starting to run out of headroom. At 4K, the GPU is completely overwhelmed on all but the lowest settings. The conclusion is simple: the Ryzen 5 7500F is more than sufficient for this game, and the RTX 4060 is the deciding factor for resolution and quality targets. A stronger GPU would unlock higher settings at 1440p and 4K, while a weaker CPU would likely not change the outcome at all.

How This Combo Ranks

In the database of tested combinations, this pairing of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4060 holds a rank of 1929 out of 3696 total combos. This places it in the middle of the pack, which is a fair reflection of its capabilities. It is not a top-tier enthusiast setup, but it is also far from a low-end configuration. The ranking suggests that while this combo can run the game, there are many other tested systems that achieve higher average FPS.

This mid-pack ranking aligns with the measured FPS data. The combo excels at 1080p and is capable at 1440p, but it struggles at 4K. The fact that it is in the 52nd percentile of all tested combos indicates that a significant portion of other systems outperform it, particularly at higher resolutions. For a builder, this means the hardware is competent but not exceptional. It is a solid mainstream choice that will handle most games well, but it will not be at the top of any performance charts for demanding titles like The Technomancer at 4K.

The Verdict

Can this PC run The Technomancer? Yes, but the answer depends heavily on the target resolution and settings. The verdict by resolution is clear. At 1920x1080, the system is a resounding success. All four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with the best playable setting being Ultra at an average of 87 FPS. This is the sweet spot for this hardware.

At 2560x1440, the system is still very capable. The playable settings are Low (112.2 FPS), Medium (85.2 FPS), and High (74.7 FPS). The best playable setting is High, which provides a smooth experience at 74.7 FPS. The Ultra preset, at 54.4 FPS, falls just short of the 60 FPS playable threshold and is not recommended for a consistent frame rate.

At 3840x2160, 4K gaming is only possible with significant compromises. The only playable setting is Low, which averages 61 FPS. This is technically above the 60 FPS threshold, but it is a marginal pass. The Medium (46.9 FPS), High (41.4 FPS), and Ultra (33.5 FPS) presets are all unplayable by the 60 FPS standard. The verdict is straightforward: use this system for 1080p or 1440p gaming, and treat 4K as a low-settings novelty.

FAQ

Q: Can this PC run The Technomancer at 1080p with maximum settings?

A: Yes. The benchmark data shows an average FPS of 87 at 1920x1080 with the Ultra preset, which is well above the 60 FPS playable threshold.

Q: What is the best playable setting at 1440p for this combo?

A: The best playable setting at 2560x1440 is High, which achieves an average of 74.7 FPS. The Ultra preset drops to 54.4 FPS, which is below the 60 FPS threshold.

Q: Is 4K gaming possible with the AMD Ryzen 5 7500F and RTX 4060?

A: Yes, but only at the Low settings preset, which averages 61 FPS at 3840x2160. All higher presets (Medium, High, Ultra) produce average frame rates below the 60 FPS threshold.

Q: How does the RTX 4060 compare to its closest rival in this game?

A: The RTX 4060's performance is nearly identical to the AMD Radeon HD 7790, with a deltaPct of -0.2%. Other close rivals include the AMD Radeon 780M and the AMD Radeon Pro 560.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data indicates the game is heavily GPU-bound. The CPU's nearest rivals are all within 0.4% of its score, while the GPU's performance drops dramatically from 172 FPS at 1080p Low to 33.5 FPS at 4K Ultra, showing the graphics card is the bottleneck.

Q: What is the overall rank of this combo among all tested systems?

A: This combination of CPU and GPU ranks 1929 out of 3696 tested combos, placing it in the middle of the performance spectrum for The Technomancer.