The Technomancer

AMD Ryzen 5 7500F and Intel Arc B580 present a mid-range pairing that handles The Technomancer with clear resolution-dependent limits. Measured frame rates show a system that is comfortably playable at 1080p across all presets, acceptable at 1440p with settings dialed back, and not viable at 4K. The data indicates a CPU with strong single-threaded headroom and a GPU that scales well at lower resolutions but runs out of steam as pixel count climbs.

Best Settings per Resolution

At 3840x2160, no preset reaches the 60 FPS playability threshold. The strongest result comes from Low settings, which averages 50.5 FPS. High settings drop to 32.3 FPS, Medium to 35.1 FPS, and Ultra bottoms out at 27.4 FPS. The gap between Low and the next tier is substantial, but even the best 4K result falls nearly 10 FPS short of playable.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 69.5 FPS. High settings average 58.8 FPS, just under the threshold, while Low runs at 91.7 FPS and Ultra drops to 46.2 FPS. Medium is the sweet spot here—it provides a comfortable margin above 60 FPS while retaining more visual fidelity than Low.

At 1920x1080, the most demanding preset that clears 60 FPS is Ultra, with an average of 69.8 FPS. This is the only resolution where the full settings range is playable: High averages 87.5 FPS, Medium 106.8 FPS, and Low leads at 138.2 FPS. The Ultra result is close to the 1440p Medium figure, suggesting the GPU is the limiting factor as resolution scales.

How This Combo Ranks

The combination of AMD Ryzen 5 7500F and Intel Arc B580 ranks 2784 out of 3696 tested combos for The Technomancer. This places it in the lower third of all configurations, which aligns with the measured frame rates: the system is capable at 1080p but falls behind at higher resolutions. The rank reflects the GPU's mid-tier standing more than the CPU's—the Ryzen 5 7500F sits at the 77th percentile among all CPUs, while the Arc B580 sits at the 68th percentile among all GPUs.

The combo rank suggests that while individual components are above average, their combined performance in this title is dragged down by the GPU's 4K limitations. At 1080p, the pairing behaves like a high-refresh setup; at 1440p, it becomes a medium-settings machine; at 4K, it is effectively unplayable. This is consistent with the percentile gap between the two parts—the CPU has more headroom than the GPU can exploit at higher resolutions.

FAQ

Q: Can this PC run The Technomancer at 4K?

A: No. The best 4K result is 50.5 FPS at Low settings, which is below the 60 FPS playability threshold. High, Medium, and Ultra all fall further behind, with averages of 32.3, 35.1, and 27.4 FPS respectively.

Q: What is the highest playable setting at 1440p?

A: Medium settings, which average 69.5 FPS. High settings average 58.8 FPS, just missing the 60 FPS mark, while Ultra drops to 46.2 FPS and Low runs at 91.7 FPS.

Q: Is 1080p Ultra smooth with this hardware?

A: Yes. Ultra settings at 1920x1080 average 69.8 FPS, clearing the 60 FPS threshold with nearly 10 FPS to spare. Lower presets are even faster, ranging from 87.5 FPS at High to 138.2 FPS at Low.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 7500F has an average benchmark score of 24964, placing it at the 77th percentile of all CPUs. Its closest rival, the Intel Core i7-11850H, scores 24935 (0.1% lower), while the AMD Ryzen 5 8400F scores 25005 (0.2% higher).

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B580 has an average benchmark score of 23021, at the 68th percentile of all GPUs. The AMD Radeon RX 580 2048SP scores 23061 (0.2% higher), the NVIDIA GeForce RTX 2080 scores 22895 (0.6% lower), and the RTX 3080 scores 23172 (0.7% higher).

Q: Which resolution offers the best experience?

A: 1920x1080 is the only resolution where all four presets are playable, with Ultra hitting 69.8 FPS. At 1440p, only Low and Medium clear 60 FPS. At 4K, no preset is playable.

Similar Performance Alternatives

For the CPU, the nearest rivals to the AMD Ryzen 5 7500F are all within a 0.4% average score delta. The Intel Core i7-11850H scores 24935 (0.1% lower), the AMD Ryzen 5 8400F scores 25005 (0.2% higher), the Intel Core i7-13620H scores 24911 (0.2% lower), and the Intel Core 5 210H scores 24872 (0.4% lower). In The Technomancer, these processors would deliver nearly identical frame rates at all resolutions, since the game's CPU demands are modest relative to the GPU bottleneck at higher settings.

For the GPU, the Intel Arc B580's nearest rivals show a wider spread despite small deltas. The AMD Radeon RX 580 2048SP scores 23061 (0.2% higher), the NVIDIA GeForce RTX 2080 scores 22895 (0.6% lower), the RTX 3080 scores 23172 (0.7% higher), and the NVIDIA P106-100 scores 23249 (1.0% higher). In practice, swapping the Arc B580 for any of these would shift The Technomancer results by less than one frame per second at each preset—meaning the 1080p Ultra experience would remain playable, and 4K would remain out of reach.

CPU and GPU Roles

The data shows a clear shift in bottleneck behavior across resolutions. At 1920x1080, the system scales well with settings: Low runs at 138.2 FPS, Medium at 106.8 FPS, High at 87.5 FPS, and Ultra at 69.8 FPS. The smooth progression suggests the GPU is the primary constraint, with each preset tier costing roughly 20-30 FPS. The CPU's strong single-threaded score (3218 in Cinebench R23) ensures it is not holding back even at the lowest settings.

At 2560x1440, the GPU's role becomes more pronounced. Low settings drop to 91.7 FPS, Medium to 69.5 FPS, High to 58.8 FPS, and Ultra to 46.2 FPS. The delta between Low and Medium here is 22.2 FPS, similar to 1080p, but the absolute numbers are lower. The CPU's 3DMark scores (6376 at 16 threads) indicate it has ample headroom; the frame rate drop is attributable to the GPU's memory bandwidth and fill rate limits as pixel count increases.

At 3840x2160, the GPU is unequivocally the limiting factor. Low settings average 50.5 FPS, Medium 35.1 FPS, High 32.3 FPS, and Ultra 27.4 FPS. The scaling from 1440p to 4K at Low is a 45% reduction (91.7 to 50.5 FPS), which outpaces what the CPU would cause—the Ryzen 5 7500F's multi-threaded score (22799 in Cinebench R23) is more than sufficient for this title. The Arc B580's 12 GB of GDDR6 memory and 456.0 GB/s bandwidth are simply not enough to maintain 60 FPS at 4K, regardless of preset.

Across all resolutions, the CPU matters less as resolution increases. At 1080p, the CPU's single-thread performance helps sustain high frame rates at Low settings. At 1440p and 4K, the GPU's rendering workload dominates, and the CPU's advantage over its rivals becomes irrelevant. This is typical for a 2016 Action RPG with modest threading requirements.

The Verdict

The AMD Ryzen 5 7500F and Intel Arc B580 can run The Technomancer, but the experience depends heavily on resolution. At 1920x1080, the system is fully playable at every preset, with Ultra averaging 69.8 FPS—a clear pass. At 2560x1440, only Low (91.7 FPS) and Medium (69.5 FPS) clear the 60 FPS threshold; High averages 58.8 FPS and Ultra 46.2 FPS, so players should stick to Medium for the best balance. At 3840x2160, no preset reaches 60 FPS—the best result is 50.5 FPS at Low—so 4K is not viable with this pairing.

For 1080p gaming, this combo is a confident recommendation. For 1440p, it is workable with settings compromises. For 4K, it falls short. The verdict data confirms this: playable settings are listed for 1440p (Low, Medium) and 1080p (all four presets), with no playable settings at 2160p. The system's 77th percentile CPU and 68th percentile GPU combine to deliver a solid mid-range experience, but not a high-end one.