Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 79 | 93 | 121 |
| 1440p QHD | 113 | 144 | 169 | 220 |
| 1080p Full HD | 173 | 221 | 240 | 265 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5090 is a combination that sits in the 117th percentile slot of tested combos for The Technomancer, placing it among the top 3.2% of all 3,696 configurations measured. This pairing of a six-core Zen 4 CPU with a Blackwell flagship GPU produces frame rates that are consistently far above the 60 FPS playable threshold across every resolution and preset tested, making it a configuration that does not merely run the game but dominates it.
Measured FPS Breakdown
The measured data reveals a clear hierarchy of performance scaling as resolution and graphical load increase. At 1920x1080, the RTX 5090 is so far ahead that the CPU becomes the primary limiter. The average frame rate at Low settings reaches 265 FPS. Moving to Medium produces an average of 240 FPS, with a recorded minimum of 204 FPS and a maximum of 277 FPS. High settings yield 221 FPS, while Ultra drops to 173 FPS. The gap between Low and Ultra at 1080p is 92 FPS, indicating that even at maximum graphical fidelity, the system has enormous headroom above the 60 FPS threshold.
At 2560x1440, the frame rates remain exceptionally high but begin to show the GPU working harder. Low settings deliver 220 FPS, and Medium averages 169 FPS with a minimum of 144 FPS and a maximum of 195 FPS. High settings produce 144 FPS. Ultra settings still maintain a robust 113 FPS. The delta between Low and Ultra here is 107 FPS, slightly larger than at 1080p, suggesting that the GPU is starting to take on more of the workload as pixel count increases.
The most demanding scenario is 3840x2160, where the RTX 5090‘s 32 GB of GDDR7 memory and 512-bit bus are fully engaged. At Low settings, the average is 121 FPS. Medium drops to 93 FPS, with a minimum of 79 FPS and a maximum of 107 FPS. High settings average 79 FPS. Ultra settings bring the average down to 62 FPS, which is just barely above the 60 FPS playable threshold. This is the only configuration where the system approaches its limit; the minimum FPS at Medium (79) is still comfortably above 60, but the Ultra preset’s average of 62 FPS leaves little margin for demanding scenes.
How This Combo Ranks
Within the database of 3,696 tested combinations, this CPU-GPU pairing ranks 117th for The Technomancer. This places it in the top 3.2% of all configurations, a position that reflects the raw power of both components rather than any specific optimization for this 2016 Action RPG. The ranking implies that there are 116 other combos that achieve higher frame rates, but these would necessarily involve even more extreme hardware or more favorable CPU-GPU balances for this title.
The Ryzen 5 7400F itself holds the 83rd percentile among all CPUs in general benchmark scores, with an average benchmark score of 32,750. The RTX 5090 sits in the 92nd percentile among all GPUs, with an average score of 79,842. The combination of an 83rd-percentile CPU and a 92nd-percentile GPU yields a game-specific rank that is higher than either component’s individual percentile, suggesting that the game’s engine scales well with both multi-core CPU performance and raw GPU throughput. Notably, the CPU’s nearest rivals—the Intel Core i5-14600T (delta 0.1%), Intel Core Ultra 7 155H (delta 0.2%), AMD Ryzen 7 PRO 6850H (delta -0.2%), and AMD Ryzen AI 7 PRO 360 (delta 0.3%)—are all within 0.3% of its average score, meaning that swapping in any of these CPUs would yield nearly identical results in this game.
FAQ
*Q: Can this PC run The Technomancer at 4K Ultra settings?*
A: Yes, the data shows an average of 62 FPS at 3840x2160 with Ultra settings, which clears the 60 FPS playable threshold, though just barely. The minimum FPS for this setting is not recorded, but the average suggests that the system is at its limit.
Q: How much performance headroom is there at 1080p?
A: At 1920x1080, even the most demanding Ultra preset averages 173 FPS, which is nearly three times the 60 FPS playable threshold. Low settings reach 265 FPS, indicating that the RTX 5090 is heavily underutilized at this resolution.
Q: Is the Ryzen 5 7400F a bottleneck for the RTX 5090 in this game?
A: The evidence suggests yes at lower resolutions. The frame rate delta between Low and Ultra at 1080p is 92 FPS (265 vs 173), while at 4K it is 59 FPS (121 vs 62). This smaller gap at higher resolutions indicates that the GPU becomes the limiting factor as resolution increases, whereas at 1080p the CPU’s six cores are the constraint.
Q: What is the minimum FPS recorded for this configuration?
A: The only recorded minimum FPS values are for Medium settings: 204 FPS at 1920x1080, 144 FPS at 2560x1440, and 79 FPS at 3840x2160. These minimums are all above the 60 FPS threshold, indicating no stutter-prone dips in the tested scenarios.
Q: How does the RTX 5090 compare to its nearest competitor in terms of average benchmark score?
A: The RTX 5090 has an average benchmark score of 79,842, which is 0.3% higher than the NVIDIA Tesla P100 PCIe 16 GB (79,605) and 1.1% higher than the AMD Radeon RX 6850M XT (78,940). The AMD Radeon Pro Vega 64X is 1.4% higher at 80,959.
Q: What is the best settings preset for 1440p that maintains high frame rates?
A: At 2560x1440, Ultra settings average 113 FPS, which is well above 60 FPS. The Medium preset averages 169 FPS with a 144 FPS minimum, but Ultra is the highest preset that still delivers a smooth experience, so it is the recommended choice.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the Intel Core i5-14600T, Intel Core Ultra 7 155H, AMD Ryzen 7 PRO 6850H, and AMD Ryzen AI 7 PRO 360 all have average benchmark scores within 0.3% of the Ryzen 5 7400F. For The Technomancer, any of these CPUs paired with the RTX 5090 would produce frame rates within a few FPS of this configuration. The Intel Core i5-14600T (delta 0.1%) and Intel Core Ultra 7 155H (delta 0.2%) are marginally faster on average, while the AMD Ryzen 7 PRO 6850H (delta -0.2%) and AMD Ryzen AI 7 PRO 360 (delta 0.3%) are essentially equivalent.
On the GPU side, the NVIDIA Tesla P100 PCIe 16 GB (delta 0.3%) and Tesla P100 PCIe 12 GB (delta 0.6%) are the closest matches, followed by the AMD Radeon RX 6850M XT (delta 1.1%). The AMD Radeon Pro Vega 64X is 1.4% faster, which would translate to roughly 1-2 FPS difference at 4K Ultra. In practice, swapping the RTX 5090 for any of these rivals would keep the system firmly in playable territory across all resolutions, though the 4K Ultra preset at 62 FPS could dip below 60 FPS with a GPU that is 1.4% slower in synthetic benchmarks.
CPU and GPU Roles
The data reveals a classic resolution-dependent shift in component responsibility. At 1920x1080, the CPU dominates the performance ceiling. This is evident from the frame rate scaling: Low settings produce 265 FPS, but Ultra only reaches 173 FPS, a 34.7% reduction. The RTX 5090 has such immense rasterization power that even at Ultra, it is waiting on the Ryzen 5 7400F’s six cores to feed it frames. The recorded minimum at Medium (204 FPS) is still far above what the GPU would struggle with, confirming CPU limitation.
As resolution increases to 2560x1440, the balance shifts. Low settings drop from 265 to 220 FPS, a 17% reduction, while Ultra drops from 173 to 113 FPS, a 34.7% reduction. The larger absolute drop at Ultra (60 FPS) versus Low (45 FPS) indicates that the GPU is beginning to carry more weight, but the CPU still provides a high enough frame rate floor that the system never approaches 60 FPS.
At 3840x2160, the GPU becomes the clear bottleneck. Low settings fall to 121 FPS, and Ultra drops to 62 FPS. The delta between Low and Ultra is now 59 FPS, the smallest absolute gap across all resolutions. This compression of frame rates at 4K is a hallmark of GPU-bound scenarios—the CPU has ample headroom to issue draw calls, but the RTX 5090’s 21,760 shading units are working at full capacity to fill 8.3 million pixels. The minimum FPS at 4K Medium (79 FPS) confirms that even in demanding moments, the GPU keeps the frame rate well above the playable threshold.
The Verdict
This PC can absolutely run The Technomancer, and it does so with extraordinary margins. The verdict data shows that all four settings presets—Low, Medium, High, and Ultra—are playable at every resolution, meaning they all average above 60 FPS. At 1920x1080, the worst-case Ultra preset averages 173 FPS, while at 2560x1440, Ultra averages 113 FPS. The only point of concern is 3840x2160 Ultra, which averages 62 FPS—barely clearing the threshold. For a 2016 game, this is overkill in every regard, but the 4K Ultra result is technically playable, with no recorded minimum FPS to suggest dips below 60.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 173 FPS. There is no reason to lower settings here, as even the heaviest preset provides nearly triple the playable threshold.
At 2560x1440, Ultra is again the best choice, averaging 113 FPS. This gives a comfortable margin above 60 FPS while delivering the game’s highest graphical quality.
At 3840x2160, Ultra averages 62 FPS, which is above 60 FPS but with no margin for error. The data shows that High settings average 79 FPS, providing a safer buffer. If the goal is maximum visual fidelity, Ultra is technically playable; if the goal is stability, High is the more prudent choice. The Medium preset at 79 FPS minimum indicates that even under load, the system does not dip below 60 FPS at High settings. Therefore, the best settings per resolution are Ultra at 1080p, Ultra at 1440p, and either High (79 FPS) or Ultra (62 FPS) at 4K, depending on whether one prioritizes fidelity or frame-time consistency.