Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

94%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
249 FPS
Ultra 1080p Measured
127 FPS

1440p (2K / QHD)

Low 1440p Measured
162 FPS
Ultra 1440p Measured
83 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
46 FPS
6.1ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 32,750
Graphics Card
Required 27,947
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 59 69 89
1440p QHD 83 107 125 162
1080p Full HD 127 163 191 249

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 163
1920x1080 Low 249
1920x1080 Medium 191
1920x1080 Ultra 127
2560x1440 High 107
2560x1440 Low 162
2560x1440 Medium 125
2560x1440 Ultra 83
3840x2160 High 59
3840x2160 Low 89
3840x2160 Medium 69
3840x2160 Ultra 46

Performance Analysis: The Technomancer on Your System

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 5070 delivers playable performance in The Technomancer across most settings and resolutions, with the data showing a robust combination that ranks 744th out of 3696 tested configurations. At 1080p and 1440p, every preset from Low to Ultra stays above the 60 FPS threshold, while at 4K only Low and Medium manage to hold that line. This analysis breaks down the measured frame rates, contextualizes the combo's standing, and explores which component carries the load at different resolutions.

Measured FPS Breakdown

The measured frame rates for this combo span three resolutions and four quality presets. At 1920x1080, the lowest preset delivers an average of 249 FPS, while Medium averages 191 FPS with a minimum of 162 and a maximum of 220. High drops to 163 FPS on average, and Ultra still holds a strong 127 FPS. These numbers indicate that at 1080p, the system is never remotely challenged, even at the highest settings.

Moving to 2560x1440, the same pattern holds but with expected reductions. Low averages 162 FPS, Medium 125 FPS (min 106, max 143), High 107 FPS, and Ultra 83 FPS. The drop from 1080p to 1440p is consistent across all presets, with Ultra losing about 44 FPS and Low losing 87 FPS. This scaling suggests the GPU is becoming more influential as pixel count rises, but the combo still clears the 60 FPS bar with ease.

At 3840x2160, the picture changes significantly. Low averages 89 FPS, Medium 69 FPS (min 58, max 79), High 59 FPS, and Ultra 46 FPS. Here, the 60 FPS threshold is crossed only by Low and Medium; High falls just below at 59, and Ultra is well under. The gap between Low and Ultra at 4K is 43 FPS, compared to 122 FPS at 1080p, indicating that resolution scaling compresses the performance envelope. The min/max data for Medium at 4K (58–79) shows occasional dips below 60, but the average remains playable.

Across all resolutions, the Medium preset is the only one with recorded minimum and maximum values, providing a glimpse into frame time consistency. At 1080p Medium, the minimum of 162 FPS is far above the playable threshold, while at 4K Medium the minimum of 58 FPS is just below 60, though the average of 69 FPS suggests most frames land higher.

How This Combo Ranks

The combo's rank of 744 out of 3696 tested configurations places it in the top fraction of all systems evaluated for The Technomancer. To put that in perspective, only 743 other combos outperform it, meaning this pairing sits comfortably above the median and likely within the top 20% of tested hardware. The CPU holds an 83rd percentile ranking among all processors, and the GPU an 82nd percentile among all graphics cards, reinforcing that both components are well above average in their respective pools.

The rank is not merely a function of raw hardware; it reflects how well this specific combination handles the game's engine. The Technomancer, released in 2016, is not a particularly demanding title by modern standards, and this combo's high placement suggests it can brute-force the game with headroom to spare at most settings. The measured FPS numbers align with that interpretation: even at 4K Ultra, the system manages 46 FPS, which is low but not catastrophic, and at 1080p it never dips below 127 FPS.

FAQ

Q: Can this PC run The Technomancer at 4K?

A: Yes, but only on Low and Medium presets. Low averages 89 FPS and Medium 69 FPS, both above the 60 FPS threshold. High and Ultra fall below at 59 and 46 FPS respectively.

Q: What is the best preset for 1440p?

A: Ultra is the most demanding playable preset at 1440p, delivering an average of 83 FPS. All other presets—Low, Medium, and High—also clear 60 FPS, so there is no compromise needed at this resolution.

Q: How does the CPU's benchmark score compare to its nearest rivals?

A: The Ryzen 5 7400F has an average benchmark score of 32750, placing it in the 83rd percentile of all CPUs. Its closest rival, the Intel Core i5-14600T, scores 32707, a delta of 0.1%. Other nearby chips include the Intel Core Ultra 7 155H (0.2% delta) and the AMD Ryzen 7 PRO 6850H (-0.2% delta).

Q: Is the GPU more important than the CPU at higher resolutions?

A: The data indicates that the GPU becomes the limiting factor as resolution increases. At 1080p Low, the combo reaches 249 FPS, suggesting the CPU can feed frames well beyond typical display refresh rates. At 4K Ultra, the average drops to 46 FPS, a decline that points to GPU-bound performance. The CPU's strong single-thread score (Cinebench R23 single-core 3072) supports its ability to handle high frame rates at lower resolutions.

Q: What is the launch MSRP of these components?

A: The CPU has a launch MSRP of $229, and the GPU has a launch MSRP of 549 USD.

Q: Are there any presets that fail to reach 60 FPS?

A: Yes. At 4K, High (59 FPS) and Ultra (46 FPS) both fall below the threshold. All other presets at every resolution clear 60 FPS.

The Verdict

This PC can run The Technomancer with playable performance at all tested resolutions, provided the right settings are chosen. At 1920x1080, all four presets—Low, Medium, High, and Ultra—clear 60 FPS, with Ultra averaging 127 FPS. At 2560x1440, the same is true, and Ultra still manages 83 FPS. At 3840x2160, only Low and Medium are playable, with Medium averaging 69 FPS and Low 89 FPS. High at 4K just misses the mark at 59 FPS, while Ultra is not viable at 46 FPS.

The verdict is clear: for a smooth experience, users should stick to 1080p or 1440p with any preset, or 4K with Medium or lower. The system has ample headroom for high refresh rate displays at lower resolutions, and even at 4K it can deliver a console-like experience on Medium settings.

CPU and GPU Roles

The division of labor between the Ryzen 5 7400F and the RTX 5070 becomes apparent when examining how frame rates scale with resolution and settings. At 1080p Low, the system outputs 249 FPS, a figure that far exceeds typical monitor refresh rates and suggests the CPU is not a bottleneck. The CPU's multi-threaded score (Cinebench R23 multi-core 21765) and single-thread score (3072) indicate strong processing capability, which likely explains the high frame rates at low resolutions where the GPU is underutilized.

As resolution climbs to 1440p, the average FPS drops by roughly 35–40% across all presets. For example, Low goes from 249 to 162 FPS, and Ultra from 127 to 83. This consistent proportional drop points to the GPU becoming more dominant, as pixel fill rate and memory bandwidth (672.0 GB/s on the RTX 5070) start to matter more. At 4K, the decline steepens further: Low falls to 89 FPS, Medium to 69, High to 59, and Ultra to 46. The gap between Low and Ultra at 4K is 43 FPS, compared to 122 FPS at 1080p, indicating that the GPU's limits are reached earlier on the highest settings.

The CPU's role is most evident at 1080p, where even the most demanding preset maintains 127 FPS. The GPU's role becomes decisive at 4K, where the RTX 5070's raw compute (30.87 TFLOPS FP32) and 12 GB GDDR7 memory are taxed by the higher resolution. The game's 2016 release date means it does not leverage modern graphics features like ray tracing or DLSS, so the bottleneck is purely rasterization throughput. The data suggests that for this title, the GPU is the primary constraint at 1440p and above, while the CPU provides ample headroom at 1080p.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is as follows:

  • 1920x1080: Ultra, with an average of 127 FPS. This is the highest quality setting and still leaves massive headroom above the threshold.
  • 2560x1440: Ultra, with an average of 83 FPS. Again, the maximum preset is playable, though the margin over 60 FPS is narrower than at 1080p.
  • 3840x2160: Medium, with an average of 69 FPS. High falls just short at 59 FPS, so Medium is the best choice for 4K without sacrificing too much visual quality.

These recommendations assume a 60 FPS target. Users with higher refresh rate displays at 1080p or 1440p can also enable Ultra without issue, as the averages are well above 60.

Similar Performance Alternatives

The CPU's nearest rivals, based on average benchmark scores, are the Intel Core i5-14600T (0.1% delta), Intel Core Ultra 7 155H (0.2% delta), AMD Ryzen 7 PRO 6850H (-0.2% delta), and AMD Ryzen AI 7 PRO 360 (0.3% delta). Any of these processors would deliver nearly identical performance in The Technomancer, given the same GPU and settings, because their overall compute scores are within a fraction of a percent of the Ryzen 5 7400F.

On the GPU side, the RTX 5070's closest competitors are the AMD Radeon Pro 580 (0.1% delta), AMD Radeon Pro WX 7100 (0.8% delta), AMD Radeon Pro 5300 (-1.2% delta), and NVIDIA RTX A500 Mobile (2% delta). These cards, while professional or mobile variants, have similar average benchmark scores, so a system pairing any of them with the Ryzen 5 7400F would likely produce frame rates within a couple of percent of the measured results. For example, the Radeon Pro 580 scores 40318 against the RTX 5070's 40377, a negligible difference.

It is important to note that these alternatives are not direct consumer gaming equivalents, but the benchmark data shows they would behave similarly in this title. The deltaPct values are all within 2%, meaning the performance envelope is very tight. For users considering a build around the Ryzen 5 7400F, swapping in one of these CPUs would not meaningfully change the outcome in The Technomancer. Similarly, replacing the RTX 5070 with a Radeon Pro 580 or RTX A500 Mobile would yield comparable frame rates, though driver and feature differences could affect other games.