Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

The Technomancer
Action RPG 2016

The Technomancer

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
150 FPS
Ultra 1080p Measured
77 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
10.2ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,436
Your CPU 32,750
Graphics Card
Required 27,947
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 41 54
1440p QHD 50 64 75 98
1080p Full HD 77 98 115 150

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 98
1920x1080 Low 150
1920x1080 Medium 115
1920x1080 Ultra 77
2560x1440 High 64
2560x1440 Low 98
2560x1440 Medium 75
2560x1440 Ultra 50
3840x2160 High 35
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: The Technomancer on Your System

# Can the AMD Ryzen 5 7400F + NVIDIA GeForce RTX 5050 Run The Technomancer?

The pairing of an AMD Ryzen 5 7400F with an NVIDIA GeForce RTX 5050 is a modern mid-range combination, and the question is whether it can handle The Technomancer, a game known for pushing hardware with its dense environments and real-time combat. The benchmark data on both components shows a clear picture: this CPU is a strong performer for its class, but the GPU is a newer architecture with considerable compute power. The measured FPS data, however, reveals a more complex story.

FAQ

Q: What is the AMD Ryzen 5 7400F, and how does it compare to its direct rivals?

A: The Ryzen 5 7400F is a 6-core, 12-thread desktop processor from AMD's 7000 series, built on the Zen 4 architecture (codenamed Raphael) using a 5nm process at TSMC. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a 65W TDP. In the benchmark database, this chip posts an average score of 32,750, placing it in the 83rd percentile of all CPUs. Its nearest rivals are all extremely close: the Intel Core i5-14600T scores 32,707 (0.1% higher), the Intel Core Ultra 7 155H scores 32,697 (0.2% higher), and the AMD Ryzen 7 PRO 6850H scores 32,812 (0.2% lower). The AMD Ryzen AI 7 PRO 360 trails by 0.3%. This means the 7400F is competitive with the best upper-mid-range CPUs, but it is not a top-tier part.

Q: What is the RTX 5050's position against its closest GPU rivals?

The RTX 5050 is an NVIDIA GeForce 50-series card, based on the Blackwell 2 architecture and built on a 5nm process at TSMC. It has 2,560 shading units, 80 TMUs, and 32 ROPs. It posts an average benchmark score of 21,035, which puts it in the 66th percentile of all GPUs. Its closest rivals are all within a narrow band: the AMD Radeon RX Vega GL scores 21,153 (0.6% higher), the AMD Radeon HD 8970M scores 21,237 (1.0% higher), the AMD Radeon RX 5600 XT scores 20,713 (1.6% lower), and the NVIDIA RTX A4000 Mobile scores 21,379 (1.6% higher). So the 5050 sits in a tight cluster; it is neither a clear winner nor a clear loser.

Q: How does the CPU's cache and memory configuration affect gaming performance?

The Ryzen 5 7400F has a 64KB L1 cache per core, a 1MB L2 cache per core, and a 32MB shared L3 cache. It supports dual-channel DDR5 memory with a bandwidth of 83.2 GB/s. Memory bandwidth like this is rarely the main constraint at 1080p in a game like The Technomancer, but it can become relevant when the GPU is feeding a lot of geometry data.

Q: What are the key GPU features that matter for this game?

With 2,560 shading units, 80 tensor cores, and 20 RT cores, the RTX 5050 is a fully modern GPU. It outputs 13.17 TFLOPS of FP32 compute, and a pixel rate of 82.30 GPixel/s with a texture rate of 205.8 GTexel/s. The 8GB of GDDR6 memory on a 128-bit bus delivers 320.0 GB/s. The 8GB frame buffer is likely sufficient for 1440p, but at 4K the capacity may be a limit.

Q: How does the CPU's single-thread performance matter here?

In the Cinebench R15 single-core test, the 7400F scores 309. Its multi-core score is 2,193. This is a strong single-thread result, which matters because The Technomancer's gameplay can be bound by game-logic and AI simulation on a single core. In the PassMark single-thread test it scores 3,689. That's a robust result. In multi-threaded workloads, the CPU has a PassMark multi-thread score of 25,645.

Q: What does the "data is measured" flag mean for the FPS numbers?

The `dataIsMeasured` flag indicates that the FPS figures are from actual runs, not estimates. The measured FPS data contains a range of settings and resolutions, which we'll break down in the following sections.

CPU and GPU Roles

The data shows a large gap between the CPU and GPU roles. At 1080p, the GPU is clearly the primary driver: at High settings it averages 98 FPS, at Medium 115 FPS, and 150 FPS at Low. The CPU's 12 threads are enough to keep up with the GPU at these framerates. But at 1440p, the GPU's load increases: the High settings average 64 FPS, Medium averages 75 FPS, and Low 98 FPS. The CPU can still keep up, and the GPU is still the main constraint. At 4K, the GPU is clearly the bottleneck: the High setting averages 35 FPS, Medium 41 FPS, and the Low setting 54 FPS. The GPU is the weak link. The CPU's single-threaded performance is enough for the game's main thread, but it is the GPU that sets the limit at 4K.

Scaling between resolutions is instructive. At 1080p High, the system averages 98 FPS. At 1440p High, that drops to 64 FPS. That's a 35% drop. At 4K High, it's down to 35 FPS — a 64% drop. From Medium 1080p (115 FPS) to Medium 1440p (75 FPS) is a 35% drop, and from Medium 1440p to Medium 4K (41 FPS) it's a 45% drop. Low at 1080p averages 150 FPS, dropping to 98 at 1440p (35% lower), and to 54 FPS at 4K (a further 45%). The GPU's rendering resolution is the limiting factor.

How This Combo Ranks

The combo (CPU + GPU) has a rank of 2,269 out of 3,696 tested pairs. In the top 39% of all combos tested. That's a decent result for a mid-range pairing. The data shows this combo can run the game at 1080p and 1440p without major issues, but 4K is a stretch.

The Verdict

Can this PC run The Technomancer? The answer is a qualified yes. At 1920x1080, the system is comfortably above the 60 FPS playable threshold at all settings: Ultra averages 77 FPS, High 98 FPS, Medium 115 FPS, Low 150 FPS. At 2560x1440, the High preset averages 64 FPS, which clears the 60 FPS threshold. The Low preset at 1440p averages 98 FPS. The Medium preset at 1440p averages 75 FPS. But at 3840x2160, the system falls below the playable threshold at every preset: Ultra averages 28 FPS, High 35 FPS, Medium 41 FPS, Low 54 FPS. The verdict is that the combo is fully playable at 1080p and at 1440p (on High and Low), but it cannot hold 60 FPS at 4K.

Similar Performance Alternatives

For a system ranked 2,269 out of 3,696, there are several alternatives that would perform similarly. The CPU's nearest rivals are all within 0.3% of its average score: the Intel Core i5-14600T (32,707, 0.1% higher), the Intel Core Ultra 7 155H (32,693, 0.2% higher), the AMD Ryzen 7 PRO 6850H (32,812, 0.2% lower), and the AMD Ryzen AI 9 PRO 360 (32,662, 0.3% lower). If you paired this CPU with any of those chips, you'd get nearly identical performance.

On the GPU side, the closest rivals are the AMD Radeon RX Vega GL (avg 21,153, 0.6% higher), AMD Radeon HD 8970M (avg 21,237, 1.0% higher), AMD Radeon RX 5600 XT (20,713, 1.6% lower). In each case the FPS would be indistinguishable. In short, the additional 5050 is a solid mid-range part, but the 5050 is a slightly newer and faster part. A 5050 is a better GPU for this game.

Best Settings per Resolution

Here is the most demanding preset that still holds 60 FPS at each resolution, with the exact average FPS:

  • 1920x1080: Ultra — 77 FPS average
  • 2560x1440: High — 64 FPS average
  • 3840x2160: none — the best average FPS is 54 FPS at Low, which is below the 60 FPS threshold.

Measured FPS Breakdown

Here is the full measured FPS data per resolution and settings.

3840x2160

| Settings | Avg FPS | Min FPS | Max FPS |

|---|---|---|---|

|---|---|---|---|

| High | 35 | — | — |

| Low | 54 | — | — |

| Medium | 41 | 35 | 48 |

| Ultra | 28 | — | — |

At 4K, the High preset averages 35 FPS. Low averages 54 FPS. Medium averages 41 FPS with a min of 35 and a max of 48. Ultra averages 28 FPS.

2560x1440

| Settings | Avg FPS | Min FPS | Max FPS |

|---|---|---|---|

|---|---|---|---|

| High | 64 | — | — |

| Low | 98 | — | — |

| Medium | 75 | 64 | 87 |

| Ultra | 50 | — | — |

At 1440p, High averages 64 FPS. Low averages 98 FPS. Medium averages 75 FPS, with a spread from 64 to 87. Ultra averages 50 FPS.

1920x1080

| Settings | Avg FPS | Min FPS | Max FPS |

|---|---|---|---|

|---|---|---|---|

| High | 98 | — | — |

| Low | 150 | — | — |

| Medium | 115 | 98 | 132 |

| Ultra | 77 | — | — |

At 1080p, High averages 98 FPS, Low averages 150 FPS. Medium averages 115 FPS, with a spread from 98 to 132. Ultra averages 77 FPS. The data confirms this is a 1080p machine, and a strong 1440p one, but a 4K is beyond its reach.