Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 61 | 77 | 91 | 118 |
| 1440p QHD | 110 | 141 | 165 | 215 |
| 1080p Full HD | 169 | 216 | 240 | 265 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 4090 delivers decisive performance in The Technomancer, clearing the 60 FPS threshold at every resolution and preset combination measured. At 4K Ultra, the combo averages 61 FPS, making it the exact borderline case for playability at the highest visual quality. The data shows this is a system with massive headroom at lower resolutions, where 1080p Ultra reaches 169 FPS and 1440p Ultra hits 110 FPS, indicating the GPU is the dominant constraint only at 4K.
Similar Performance Alternatives
The CPU and GPU each have close rivals based on aggregate benchmark scores. For the AMD Ryzen 5 7400F, the nearest competitor is the AMD Ryzen 7 PRO 6850H, which scores 32812 versus 32750, a difference of just -0.2%. This means in CPU-bound scenarios, swapping to that mobile-class chip would produce nearly identical frame pacing. The Intel Core i5-14600T trails by only 0.1% (32707), while the Intel Core Ultra 7 155H (32697) and AMD Ryzen AI 7 PRO 360 (32662) are within 0.3% of the 7400F's average. In practical terms, any of these processors would keep the RTX 4090 fed at 1080p and 1440p in The Technomancer, where the GPU is rarely the bottleneck.
On the GPU side, the RTX 4090's average benchmark score of 60347 places it near the Intel Arc Pro A60 (60326, 0% delta) and AMD Radeon Pro Vega 48 (60140, 0.3% delta). These are workstation-class cards with vastly different feature sets, but their aggregate scores suggest similar raw compute throughput in synthetic tests. The AMD Radeon Pro W6600M is 2.5% faster (61896), while the AMD Radeon PRO V710 is 2.9% slower (58657). For The Technomancer specifically, the measured FPS data shows the RTX 4090 delivers 77 FPS at 4K High, so any of these rival GPUs would likely fall short of 60 FPS at 4K Ultra, given the 4090's 61 FPS average there.
The percentile rankings reinforce this: the 7400F sits at the 83rd percentile among all CPUs, while the RTX 4090 is at the 88th percentile among all GPUs. This means the pairing is well-matched in terms of tier, with both components in the upper echelon of their respective categories. However, the game's measured results show that at 1080p and 1440p, the CPU's 83rd percentile standing is more than sufficient, since frame rates exceed 200 FPS at Low settings in those resolutions.
FAQ
Q: What is the highest preset that maintains 60 FPS at 4K with this CPU/GPU combo?
A: Ultra preset averages 61 FPS at 3840x2160, making it the only settings level that barely clears the threshold. Medium runs at 91 FPS, High at 77 FPS, and Low at 118 FPS.
Q: How does the RTX 4090 compare to its nearest rivals in synthetic benchmarks?
A: The RTX 4090's average score is 60347. The Intel Arc Pro A60 matches it at 60326 (0% delta), while the AMD Radeon Pro Vega 48 scores 60140 (0.3% slower). The AMD Radeon Pro W6600M is 2.5% faster at 61896.
Q: Is the Ryzen 5 7400F a bottleneck at 1080p?
A: No. At 1920x1080, the combo achieves 265 FPS on Low, 240 FPS on Medium, and 216 FPS on High. Even at Ultra, it holds 169 FPS, showing the CPU has ample headroom.
Q: What frame rates can be expected at 1440p Medium?
A: The measured average is 165 FPS, with a minimum of 140 FPS and a maximum of 190 FPS. This makes Medium a comfortable choice for high-refresh monitors.
Q: Does the game scale well with resolution?
A: Yes, but with diminishing returns. Dropping from 4K to 1440p at Ultra raises the average from 61 to 110 FPS (an 80% increase), while dropping from 1440p to 1080p at Ultra increases from 110 to 169 FPS (a 54% gain).
Q: Which component has a higher percentile ranking?
A: The RTX 4090 ranks at the 88th percentile among all GPUs, while the Ryzen 5 7400F sits at the 83rd percentile among all CPUs. Both are high-tier parts, but the GPU is relatively stronger.
Measured FPS Breakdown
At 3840x2160, the RTX 4090 with the Ryzen 5 7400F produces a spread of results across presets. Low settings average 118 FPS, Medium averages 91 FPS with a minimum of 77 and maximum of 104, High averages 77 FPS, and Ultra averages 61 FPS. The gap between Low and Ultra is 57 FPS, indicating that the game's preset scaling is substantial at 4K. Notably, the Medium preset's minimum of 77 FPS and maximum of 104 FPS show a 27 FPS variance, which suggests occasional frame dips even at this quality level.
Moving to 2560x1440, performance jumps significantly. Low averages 215 FPS, Medium averages 165 FPS with a minimum of 140 and maximum of 190, High averages 141 FPS, and Ultra averages 110 FPS. The delta between Low and Ultra here is 105 FPS, more than double the 4K spread. This indicates that at 1440p, the GPU has enough headroom to render at much higher rates, and the CPU is not limiting.
At 1920x1080, the results are extremely high across the board. Low averages 265 FPS, Medium averages 240 FPS with a minimum of 204 and maximum of 277, High averages 216 FPS, and Ultra averages 169 FPS. The minimum at Medium (204 FPS) is still above the maximum at 4K Ultra (61 FPS), highlighting the enormous resolution scaling. The variance at 1080p Medium (204 to 277 FPS) is a 73 FPS range, which is larger in absolute terms but smaller proportionally due to the high baseline.
The data reveals that the game is heavily resolution-bound. At 4K, the average FPS drops by roughly half compared to 1440p at the same preset, and at 1440p it drops by roughly a third compared to 1080p. This pattern holds across all four presets, suggesting that The Technomancer's rendering load scales nearly linearly with pixel count, and the RTX 4090's 1.01 TB/s memory bandwidth is the key enabler at 4K.
The Verdict
This system can run The Technomancer at 60 FPS or higher at every resolution and preset combination tested. At 3840x2160, the verdict is "playable" for all four settings, with Ultra being the best playable preset at 61 FPS average. This is a razor-thin margin — a single frame below the 60 FPS threshold would make Ultra unplayable, but the measured average holds. For 2560x1440, Ultra runs at 110 FPS, providing a comfortable 50 FPS buffer above the threshold. At 1920x1080, Ultra averages 169 FPS, more than double the playability threshold.
The practical takeaway is that 4K Ultra is technically playable but leaves no headroom for demanding scenes or background tasks. The Medium preset at 4K (91 FPS) is a safer choice for consistent performance, while 1440p Ultra (110 FPS) offers the best balance of visual quality and smoothness. For competitive or high-refresh play, 1080p Ultra at 169 FPS is the maximum quality that still exceeds 144 Hz.
The combo's rank of 133 out of 3696 tested combinations places it in the top 4% of all CPU/GPU pairs for this game. This is consistent with the percentile standings of both components, confirming that the pairing is well above average for The Technomancer's requirements.
CPU and GPU Roles
The data indicates that the GPU is the primary bottleneck at 4K, while the CPU becomes increasingly irrelevant at lower resolutions. At 3840x2160, the average FPS across presets ranges from 61 to 118, with Ultra at 61 FPS and Low at 118 FPS. The RTX 4090's 82.58 TFLOPS of FP32 compute is being fully utilized at this resolution, as evidenced by the steep drop from Low to Ultra. The Ryzen 5 7400F's 6 cores and 12 threads are sufficient to feed the GPU at 4K, since even the lowest FPS (61 at Ultra) is well above typical CPU-bound thresholds.
At 2560x1440, the GPU still dominates, but the headroom becomes apparent. Low hits 215 FPS, and Ultra still manages 110 FPS. The CPU's 83rd percentile standing is now more relevant, as the system approaches the point where the 7400F's 3.70 GHz base and 4.70 GHz boost clocks could theoretically limit frame rates. However, the measured data shows no such limitation — the 1440p results are consistently higher than 4K, confirming the GPU is still the limiting factor.
At 1920x1080, the CPU's role becomes more visible. Low settings reach 265 FPS, and even Ultra holds 169 FPS. These numbers are high enough that the 7400F's single-thread performance (Cinebench R23 single-core score of 3072) is likely the ceiling for maximum frame rates. The scaling from 1440p to 1080p is not as steep as from 4K to 1440p, suggesting that around 200 FPS, the CPU starts to constrain the system. The 265 FPS at 1080p Low is the highest measured value, and it aligns with the CPU's PassMark single-thread score of 3689.
The presets also reveal that the GPU's workload scales with quality settings. At 4K, the difference between Low (118 FPS) and Ultra (61 FPS) is 57 FPS, a 48% reduction. At 1440p, the same preset range spans from 215 to 110 FPS, a 49% reduction. At 1080p, it goes from 265 to 169 FPS, a 36% reduction. This suggests that at lower resolutions, the CPU is taking on a larger share of the frame time, reducing the relative impact of GPU settings.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 61 FPS. This is the maximum quality option and it barely clears the threshold. If a more stable experience is desired, Medium at 91 FPS is the next step down, offering a 30 FPS buffer. High at 77 FPS and Low at 118 FPS are also viable, but Ultra is the best setting for visual fidelity without dropping below 60 FPS.
At 2560x1440, Ultra is again the best setting, averaging 110 FPS. This provides a 50 FPS margin above the 60 FPS threshold, making it a confident choice for high-refresh monitors. The gap between Ultra (110 FPS) and High (141 FPS) is 31 FPS, so users prioritizing frame rate over visuals could opt for High, but Ultra is the recommended maximum.
At 1920x1080, Ultra averages 169 FPS, which is the best playable preset. This is more than double the 60 FPS threshold and close to 144 Hz territory. For 240 Hz displays, Medium at 240 FPS is the better choice, as it exactly matches the refresh rate. Low runs at 265 FPS, which exceeds most monitors' capabilities, and High at 216 FPS is also above 200 FPS.
The overall pattern is that the RTX 4090 is strong enough to run Ultra at every resolution, with 4K being the only place where the margin is thin. The Ryzen 5 7400F does not hold the system back at any tested configuration, as evidenced by the 1080p results exceeding 200 FPS across all settings except Ultra (169 FPS). This combination is effectively overkill for The Technomancer, a 2016 Action RPG that does not stress modern hardware at 1080p or 1440p.