Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 45 | 53 | 69 |
| 1440p QHD | 64 | 82 | 96 | 125 |
| 1080p Full HD | 98 | 125 | 147 | 191 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
The AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 combination delivers a wide spread of performance in The Technomancer, ranging from a slideshow at 4K Ultra to a high-refresh-rate experience at 1080p. The measured data shows that the game scales predictably with resolution and preset levels, but the 8 GB frame buffer and the GPU’s overall compute headroom define the ceiling. At 3840x2160, the average frame rate drops below the 60 FPS playable threshold for every preset except Low, with a 45 FPS average at High and a 35 FPS average at Ultra. Dropping to 2560x1440 changes the story, as all four tested presets clear the 60 FPS line, with Ultra averaging 64 FPS. At 1920x1080, the combo is comfortably above 60 FPS even at Ultra, hitting 98 FPS on average, while Low pushes to 191 FPS. The minimum frame rates recorded only for Medium settings show a 45 FPS floor at 4K, 82 FPS at 1440p, and 125 FPS at 1080p, suggesting that the Medium preset’s 1% lows are the most consistent relative to its average.
Measured FPS Breakdown
The data set includes twelve measured configurations: four presets at three resolutions. At 3840x2160, the average frame rates are 69 FPS for Low, 53 FPS for Medium, 45 FPS for High, and 35 FPS for Ultra. The Medium preset at this resolution has recorded minimum and maximum values of 45 and 61 FPS, respectively, indicating significant frame-time variance; the 45 FPS minimum is uncomfortably close to the playable threshold. No min/max data is provided for Low, High, or Ultra at 4K, so the averages must be read as the primary signal. The gap between Low and Ultra at 4K is 34 FPS, a 97% performance spread, which points to the game’s rendering settings having a massive impact on GPU load at this resolution.
Moving to 2560x1440, the averages improve substantially: 125 FPS at Low, 96 FPS at Medium, 82 FPS at High, and 64 FPS at Ultra. The Medium preset again includes min/max data, showing 82 FPS minimum and 110 FPS maximum. This is a tighter range than at 4K, suggesting more stable frame pacing at the lower resolution. The step from High to Ultra at 1440p costs 18 FPS on average, which is a 22% penalty for the highest quality settings. At 1920x1080, the averages are 191 FPS for Low, 147 FPS for Medium, 125 FPS for High, and 98 FPS for Ultra. The Medium preset’s min/max are 125 and 169 FPS, respectively. The jump from 1440p to 1080p at Ultra is 34 FPS, showing that resolution scaling is nearly linear in this range, while the jump from Low to Ultra at 1080p is 93 FPS, a 95% increase in frame rate for dropping quality.
The most striking observation is the 4K Ultra result: 35 FPS is not merely below 60 FPS, it is below the 45 FPS minimum seen at 4K Medium. This indicates that the Ultra preset at 4K is pushing the RTX 3070 into a region where the GPU is saturated, and the lack of min/max data for that configuration hides potential stutter. At 1080p, even the most demanding preset leaves headroom for a 144 Hz display, while 1440p Ultra sits at 64 FPS, just above the playable threshold.
How This Combo Ranks
Within the benchmark database, this CPU-GPU pairing ranks 1578 out of 3696 tested combinations for The Technomancer. That places it in the upper half of all configurations, specifically in the 57th percentile of the tested pool. The rank reflects the game’s age and its moderate demands on modern hardware; a 2016 release, The Technomancer does not stress the Ryzen 5 7400F’s six Zen 4 cores heavily, leaving the RTX 3070 as the primary determinant of performance. The combo’s percentile ranking is higher than the GPU’s standalone percentile of 61, which suggests the CPU is not bottlenecking the system in this title. The data implies that pairing this CPU with a stronger GPU would yield better results, but the current configuration is balanced enough to avoid severe CPU limitations.
The rank of 1578 out of 3696 means that 2118 other combos perform better, while 1577 perform worse. This is not a top-tier result, but it is far from the bottom. For a game that relies on GPU throughput, the RTX 3070’s 8 GB memory and 448.0 GB/s bandwidth are sufficient for 1440p and 1080p, but the 4K results show why the combo sits near the middle of the pack. The data does not include comparisons to other CPUs or GPUs in the same game, so the rank must be interpreted as a broad indicator rather than a precise competitive measure.
Best Settings per Resolution
At 3840x2160, the only preset that stays at or above 60 FPS is Low, with an average of 69 FPS. Medium falls short at 53 FPS, and High and Ultra are far behind at 45 and 35 FPS, respectively. For players prioritizing smooth motion at 4K, Low is the only viable option, and even then the margin above 60 FPS is only 9 FPS, leaving little room for demanding scenes. At 2560x1440, all four presets clear the 60 FPS threshold, but the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 64 FPS. This is a slim margin, so players who prefer a buffer might choose High at 82 FPS, but the data confirms Ultra is playable. At 1920x1080, Ultra is again the best choice, averaging 98 FPS, which is well above the 60 FPS floor and leaves headroom for dips.
The pattern is clear: the RTX 3070 can handle The Technomancer at maximum quality only when resolution drops to 1440p or below. At 4K, the GPU’s memory bandwidth and compute resources are insufficient for the higher presets. The verdict data matches these findings, listing Low as the best 4K setting, Ultra at 1440p, and Ultra at 1080p.
FAQ
*Q: Can this PC run The Technomancer at 60 FPS in 4K?*
A: Only at Low settings, where the average FPS is 69. At Medium, the average drops to 53 FPS, and at High and Ultra it falls to 45 and 35 FPS, respectively.
Q: What is the highest preset that maintains 60 FPS at 1440p?
A: Ultra is the highest preset, with an average of 64 FPS. High averages 82 FPS, Medium 96 FPS, and Low 125 FPS, all above the threshold.
Q: How does the RTX 3070 perform at 1080p with this CPU?
A: At 1080p, the combo exceeds 60 FPS on all presets. Ultra averages 98 FPS, High 125 FPS, Medium 147 FPS, and Low 191 FPS.
Q: Are the minimum frame rates playable at Medium settings?
A: The data shows minimum FPS for Medium at each resolution: 45 FPS at 4K, 82 FPS at 1440p, and 125 FPS at 1080p. Only the 4K minimum falls below 60 FPS.
Q: What is the combo’s overall ranking for this game?
A: It ranks 1578 out of 3696 tested combinations, placing it in the upper half of the database.
Q: Does the CPU or GPU limit performance more?
A: The GPU is the limiting factor, especially at 4K and higher presets. The CPU’s six cores and 12 threads are sufficient, as evidenced by the strong performance at 1080p and 1440p.
CPU and GPU Roles
The division of labor between the Ryzen 5 7400F and the RTX 3070 becomes evident when examining the scaling across resolutions. At 1920x1080, the CPU has more influence because the GPU is less burdened; the jump from Low to Ultra at 1080p is 93 FPS, but the absolute values are high enough that neither component is a clear bottleneck. At 2560x1440, the GPU starts to dominate, as the average FPS drops by roughly 20-30% compared to 1080p for each preset. At 3840x2160, the GPU is the sole limiting factor, with the CPU’s performance becoming irrelevant because the RTX 3070’s 8 GB memory and 448.0 GB/s bandwidth are insufficient for high preset levels.
The data shows that the Ryzen 5 7400F’s benchmarks, such as a Cinebench R23 multi-core score of 21765 and a single-core score of 3072, are more than adequate for a 2016 title. The game’s engine likely uses fewer than six cores, so the CPU’s 12 threads are underutilized. Conversely, the RTX 3070’s Passmark G3D score of 22214 and 3DMark Steel Nomad score of 3162 indicate a mid-range GPU that struggles at 4K. The scaling between 1440p and 4K is steeper than between 1080p and 1440p, which aligns with the GPU’s memory bandwidth constraints. At 4K, the average FPS for Medium is 53, compared to 96 at 1440p, a 45% drop, while the drop from 1080p Medium to 1440p Medium is 35%. This suggests that the GPU’s fill rate and memory bandwidth are the primary bottlenecks at higher resolutions.
The Verdict
This PC can run The Technomancer, but the playable range depends heavily on resolution. At 3840x2160, only Low settings are playable, with an average of 69 FPS. Medium, High, and Ultra all fall below the 60 FPS threshold, with averages of 53, 45, and 35 FPS, respectively. At 2560x1440, all four presets are playable, and Ultra is the best setting at 64 FPS. At 1920x1080, the combo is fully capable, with Ultra averaging 98 FPS and all presets well above 60 FPS. The verdict is clear: for 4K gaming, players must accept Low quality, but for 1440p and 1080p, the system can handle maximum settings. The 60 FPS playable threshold is met at 1440p Ultra with only a 4 FPS margin, so players who prioritize smoothness might prefer High at 82 FPS. Overall, the combination is a capable 1440p machine for this game, with 1080p providing a comfortable high-refresh-rate experience.
Similar Performance Alternatives
Looking at the nearest rivals for the RTX 3070, the AMD Radeon RX 7600 XT has a benchmark score of 17083, which is 0.7% lower than the RTX 3070’s 17208 average. This suggests the RX 7600 XT would deliver nearly identical frame rates in The Technomancer, making it a viable alternative for this game. The NVIDIA GeForce GTX 690 and AMD Radeon HD 7970M are also listed with scores of 17037 and 17019, respectively, which are 1% and 1.1% lower, but these are older or mobile parts and likely lack modern driver support. The NVIDIA Tesla K40c scores 17468, which is 1.5% higher, but it is a compute-oriented card without display outputs, so it is not a practical gaming alternative.
For the CPU, the AMD Ryzen 5 7400F’s nearest rivals include the Intel Core i5-14600T, which scores 32707 (0.1% lower), and the Intel Core Ultra 7 155H, scoring 32697 (0.2% lower). These CPUs would behave almost identically in The Technomancer, as the game is not CPU-bound at the tested resolutions. The AMD Ryzen 7 PRO 6850H scores 32812, which is 0.2% higher, and the AMD Ryzen AI 7 PRO 360 scores 32662, 0.3% lower. The performance deltas are all under 1%, meaning any of these CPUs would yield the same frame rates when paired with the RTX 3070. The data implies that the GPU choice matters far more than the CPU for this title, and swapping the Ryzen 5 7400F for any of these rivals would not change the measured FPS in any meaningful way.