Instant compatibility check with FPS benchmarks and optimization tips
The Technomancer
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 31 | 36 | 47 |
| 1440p QHD | 43 | 56 | 65 | 85 |
| 1080p Full HD | 66 | 85 | 100 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: The Technomancer on Your System
Measured FPS Breakdown
The recorded data for The Technomancer with the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 2060 shows a clear performance curve that scales predictably with resolution and preset level. At 1920x1080, the combination delivers a wide spread of results across the four preset tiers. Low settings produce an average of 130 FPS, while Medium averages 100 FPS with a recorded minimum of 85 FPS and a maximum of 115 FPS. High settings drop to an 85 FPS average, and Ultra remains comfortably playable at 66 FPS. The gap between Low and Ultra at this resolution is 64 FPS, which indicates that the preset selection has a substantial impact on frame delivery.
Moving to 2560x1440, the performance envelope tightens noticeably. Low settings yield an 85 FPS average, while Medium drops to 65 FPS with a minimum of 55 FPS and a maximum of 75 FPS. High settings average 56 FPS, falling just short of the 60 FPS playability threshold, and Ultra averages 43 FPS. The drop from Low to Ultra at this resolution is 42 FPS, a smaller absolute delta than at 1080p, which suggests that resolution scaling is beginning to impose a heavier load on the GPU.
At 3840x2160, the picture changes significantly. Low settings average 47 FPS, Medium drops to 36 FPS with a minimum of 30 FPS and a maximum of 41 FPS, High averages 31 FPS, and Ultra falls to 24 FPS. None of these averages reach the 60 FPS threshold, and the spread from Low to Ultra is only 23 FPS. This compression of frame rates at 4K indicates that the RTX 2060 is operating near its practical limits, where even the lowest preset cannot restore playable performance. The data shows that the transition from 1440p to 4K is the steepest performance cliff in this configuration, with every preset losing roughly half of its average frame rate.
FAQ
Q: Can this PC run The Technomancer at 1920x1080 with Ultra settings?
A: Yes. The measured average FPS at 1080p Ultra is 66 FPS, which clears the 60 FPS playability threshold. The database lists Ultra among the playable settings at this resolution.
Q: What is the best playable setting at 2560x1440?
A: Medium is the highest preset that maintains an average of at least 60 FPS at 1440p, with a recorded average of 65 FPS. High settings fall short at 56 FPS, so Medium is the ceiling for smooth play at this resolution.
Q: Is 3840x2160 playable with any settings?
A: No. The verdict by resolution lists no playable settings at 4K. The highest average recorded is 47 FPS at Low, which is below the 60 FPS threshold. Medium averages 36 FPS, High 31 FPS, and Ultra 24 FPS.
Q: How much performance is lost when moving from 1080p to 1440p at Medium settings?
A: The average FPS drops from 100 at 1080p Medium to 65 at 1440p Medium, a reduction of 35 FPS. The minimum also falls from 85 FPS to 55 FPS, and the maximum from 115 FPS to 75 FPS.
Q: Does the RTX 2060 maintain consistent frame pacing at Medium settings?
A: At 1080p Medium, the minimum of 85 FPS and maximum of 115 FPS bracket the 100 FPS average tightly. At 1440p Medium, the minimum of 55 FPS dips below the 60 FPS threshold even though the average is 65 FPS, so brief drops below 60 FPS can occur. At 4K Medium, the minimum of 30 FPS and maximum of 41 FPS show a very narrow range around the 36 FPS average.
Q: Which resolution has the largest gap between Low and Ultra settings?
A: 1920x1080 shows the largest spread, with Low averaging 130 FPS and Ultra averaging 66 FPS, a difference of 64 FPS. At 1440p the spread is 42 FPS, and at 4K it narrows to 23 FPS.
Similar Performance Alternatives
The database places the AMD Ryzen 5 7400F at the 83rd percentile among all tested CPUs, with an average benchmark score of 32750. Its nearest rivals in the CPU benchmark pool are tightly clustered. The Intel Core i5-14600T scores 32707, a delta of 0.1 percent, making it effectively indistinguishable in synthetic tests. The Intel Core Ultra 7 155H scores 32697, a 0.2 percent delta, and the AMD Ryzen AI 7 PRO 360 scores 32662, a 0.3 percent delta. On the other side, the AMD Ryzen 7 PRO 6850H scores 32812, which is 0.2 percent higher than the 7400F. For gaming workloads in The Technomancer, any of these CPUs would likely deliver similar frame pacing, since the differences in average benchmark scores are within a fraction of a percent.
The NVIDIA GeForce RTX 2060 sits at the 58th percentile among all tested GPUs, with an average benchmark score of 15290. Its nearest rivals are equally close. The NVIDIA GeForce GTX 580 matches at 15283, a 0 percent delta. The AMD Radeon 680M scores 15270, a 0.1 percent delta. The NVIDIA GeForce RTX 3050 OEM scores 15199, a 0.6 percent delta, and the AMD Radeon RX 7600 scores 15171, a 0.8 percent delta. In practical terms, a system swapping the RTX 2060 for any of these GPUs would produce nearly identical frame rates in The Technomancer at the same settings and resolution. The RX 7600 and RTX 3050 OEM are the closest modern equivalents, while the GTX 580 and Radeon 680M represent older and integrated alternatives respectively that land in the same performance band.
When considering a full system alternative, pairing the Ryzen 5 7400F with any of these GPUs would shift the measured FPS by only a few frames at most. The CPU is not the limiting factor in this game at the resolutions tested, so the GPU choice dominates the outcome. A builder with access to an RX 7600 or RTX 3050 OEM could expect the same 1080p Ultra average of 66 FPS and the same 1440p Medium average of 65 FPS, within measurement variance.
The Verdict
The data answers the question directly: this PC can run The Technomancer, but only at certain resolutions and presets. At 1920x1080, all four settings are playable. High averages 85 FPS, Low averages 130 FPS, Medium averages 100 FPS, and Ultra averages 66 FPS. The Ultra preset clears the 60 FPS threshold with a 6 FPS margin, so maximum quality at 1080p is achievable without compromise.
At 2560x1440, the playable settings narrow to Low and Medium. Low averages 85 FPS, and Medium averages 65 FPS. High falls to 56 FPS, below the threshold, and Ultra averages 43 FPS. The best playable setting at this resolution is Medium, with an average of 65 FPS.
At 3840x2160, no settings are playable. The verdict by resolution lists an empty set of playable settings. Even Low, the least demanding preset, only reaches a 47 FPS average. Medium averages 36 FPS, High 31 FPS, and Ultra 24 FPS. For 4K gameplay, this combination would require a significant reduction in resolution or a hardware upgrade.
How This Combo Ranks
Among the 3696 tested combinations in the database, the Ryzen 5 7400F paired with the RTX 2060 ranks 2911th in The Technomancer. This places the combo in the lower third of all tested systems, which is consistent with the GPU's 58th percentile standing and the game's release in 2016. The rank reflects the overall performance envelope across all resolutions and settings, not just the playable configurations.
The ranking suggests that while the combination is fully capable at 1080p and moderately capable at 1440p, it falls behind a large portion of the database in absolute frame delivery. The CPU's 83rd percentile score does not compensate for the GPU's mid-pack position, since The Technomancer's frame rates at higher resolutions are bound by the graphics card. The 2911th rank out of 3696 combos indicates that most tested systems deliver higher average FPS in this title, particularly at 4K where the RTX 2060 cannot reach playable levels.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 66 FPS. This is the highest quality option and it still maintains a playable frame rate, leaving no need to drop to High or Medium unless the user prefers extra headroom.
At 2560x1440, the best setting is Medium, averaging 65 FPS. High falls below the threshold at 56 FPS, so Medium is the optimal balance of visual quality and smoothness at this resolution. The minimum of 55 FPS at Medium does dip slightly under 60 FPS, but the average remains solidly playable.
At 3840x2160, there is no best setting because no preset reaches 60 FPS. The database records no playable settings for this resolution. Users targeting 4K would need to accept frame rates in the 24 to 47 FPS range depending on preset, none of which meet the playability standard.
CPU and GPU Roles
The division of labor between the Ryzen 5 7400F and the RTX 2060 becomes clear when examining the scaling across resolutions and presets. At 1920x1080, the CPU has ample headroom. The 130 FPS average at Low settings and 100 FPS at Medium show that the processor can feed the GPU at high frame rates, and the 64 FPS spread between Low and Ultra indicates that the GPU is the primary variable when settings change. The CPU's 6 cores and 12 threads, combined with a strong single-thread score of 3072 in Cinebench R23, are more than sufficient for a 2016 Action RPG at 1080p.
At 2560x1440, the GPU begins to assert dominance. The 56 FPS average at High and 43 FPS at Ultra show that the graphics card is struggling to maintain frame rates as pixel count rises. The CPU is not the bottleneck here; the RTX 2060's 6 GB of GDDR6 memory and 192-bit bus width are being pushed harder. The 42 FPS spread between Low and Ultra at this resolution is smaller than at 1080p, which means the GPU is saturating earlier and settings changes have less proportional impact.
At 3840x2160, the GPU is entirely the limiting factor. The compression of the FPS spread to 23 FPS across all settings, from 47 FPS at Low to 24 FPS at Ultra, is a classic sign of pixel-bound rendering. The CPU's role diminishes further, as even the lowest preset cannot lift frame rates to playable levels. The RTX 2060's 6.451 TFLOPS of FP32 compute and 336.0 GB/s of memory bandwidth are simply insufficient for 4K in this title. The recorded data shows that resolution scaling, not preset selection, is the dominant factor in this game. Users with this combination should prioritize 1080p for maximum quality or 1440p Medium for a balance of fidelity and smoothness, while avoiding 4K entirely.